WELDING MACHIE

200A MINI Inverter welder IGBT technology MINI-200PIT

High efficiency welder based on the most advanced IGBT technology in the welding field.
Performs precision welding work with high load and a wide range of materials.
Advantages:
- Hot Start function - for easy arc ignition.
- Anti Stick function - to avoid sticking of the electrode.
- Arc Force function - dynamically adjusts arc impedance for easy ignition and aesthetic seam.
- Surge protection.
- Small size and weight.
Convenient for use in all areas of industry as well as home use.

Complete with welding cables.

Features:
Voltage: 220 V
Frequency: 50-60 Hz
No-loadvoltage: 62 V
Rated Output Current: 26A
Insulation Class: F
Degree of protection: IP21
Output welding current: 20 - 200 A
Rated duty cycle: 60%
Inverter weight: 3,100 kg

Made in China

200A IGBT MINI Welding machine Elgen Jet Power MINI-200PIS

Features:
Inverter IGBT technology make the welder runs in high utilization rate of power.
Low open circuit loss and has a good welding quality.
Suitable for MMA welding of low-carbon steel with kind of welding rod.
The design is a simple and generous.
Using LCD, intelligent multi-function display.
Simple and intuitive operation, suitable for novices.
VRD (voltage reduction device) function on - reduces the no-load voltage to a safe level. This feature meets international safety standards.
Arc force function - dynamic adjustment of the arc impedance for easy ignition and aesthetic stitching.
Hot start function - provides reliable ignition of the electrode by briefly increasing the welding current at the beginning of welding. The increased current guarantees excellent melting and the best welding quality even at the beginning of welding. As a rule, when using the Hotstart function, there is no lack of merging and the seam height is significantly reduced.
Antistick function - prevents the electrode from burning during gluing. Very often at the beginning of welding or at low welding current the electrode can burn and ignite, after which its coating breaks down and cannot be used additionally. In the event that the electrode sticks, the Antistick function automatically reduces the current, thus preventing the electrode from igniting and maintaining its usefulness.
Specification:
Input Voltage(V): 220V-240V
Frequency (Hz): 50/60 Hz
Power Factor: 0.93
No-load Voltage (V): 68 V
Current Range (A): 10-200
Rated Duty Cycle (%):60%
Usable Electrode (mm): 1.6-4.0

Insulation Class: F
Protection Degree: IP21
Machine Weight (kgs): 3.1 kgs
Accessories:
Electrode holder with 2 m cable
Earth clamp with 2 m cable
Welding mask
Brush

The equipment for TIG is not included in the price.

Made in China

35-50mm2 315A Quick Cable Connector for Welding Machine

Welding current: 315A(maximal)
Material : Copper + Rubber
Model : DKJ35-50
Wire Section: 35-50mm²
Color : Black
Suitable for: Electric welding machine output power supply connection

Made in China

250A Inverter welding machine IGBT MIG/MAG and MMA Elgen Jet Power - MIG-250PS

Features

- New design,inverter IGBT Portable MIG/MAG welding machine,compact but high efficiency.
- It adopts inverter technologh with good welding quality and high efficiency.
- DC current,fan-cooled,thermostatic protection.
- Suitable for gas MIG/MAG,and flux(gasless) welding wire.
- Suitable for welding of low carbon steel and low alloy steel.

Technical Data:

Mains voltage: 220 V
Frequency: 50-60 Hz
No-load voltage: 62 V
MIG:
Wire dia: 0,8 – 1,0 мм
Output current: 40 – 250 А
Output voltage: 16 – 26.5V
Rated duty cycle: 60 %
Power factor: 0.93
Insulation class: F
Housing shielding grade: IP21

MMA:
Output current: 20 – 250 А
Output voltage: 20.8 – 30V
Rated duty cycle: 60 %

N.W.: 19 kgs

Made in China

10-25mm2 200A Welding Cable Connector Plug

Can be used for electric cable 10-25mm2
Welding current: 200A(maximal)
Material : Copper + Rubber
Model : DKJ10-25
Wire Section: 10-25mm²
Color : Black

Made in China

CUT-40PI - IGBT Plasma Cutting machine Elgen Jet Power

Plasma cutting machine are made by international most advantaged invert technical .50Hz/60Hz frequency is inverted to high frequency (frequency is over 100KHz) by IGBT, then step down voltage and rectification current, inverter power supply generates powerful DC current through PWM technical. Because inverter technical of switch power is used, dimensions and weight of main transformer has reduced substantially and efficiency has increased 30%
Piloting arc system can strike arc easily with principle of high frequency oscillating .It has functions that it can supply gas ahead and turn off gas delayed.
Cutting machine has characteristics as following:
Stabilizing.
Reliability.
Lightness.
Save-energy and no noise.
High cutting speed.
Cutting smoothly and no polish demands

Made in China

Argon regulator

This gas regulator has reasonable and compact structure, and has gas pressure and flow indicator.
The safety valve can secure and personal safety of operator, which has stable performance and is solid and durable.
The gas regulator is applicable to liquid CO2 gas and mixed gas (CO2+agron).
Specification:
Voltage of heating pipe:  36V; 110V; 220V; 240V
Power of heating pipe: 120W; 150W; 210W; 190W
Applicable gas: Liquid CO2 gas for welding and Mixed gas for welding MAG (Ar+CO2)
Input pressure:
Liquid CO2 gas for welding : ≤ 11.8 Mpa (120 kgf/cm²)
Mixed gas for welding MAG (Ar+CO2): ≤ 14.7 Mpa(150 kgf/cm²)
Output pressure:
0.35±0.05MPa(0.5±0.5kgf/cm²)
Inlet thread: G 5/8-14, 0.86-14 Others
Outlet thread: M12x1, M16x1.5 Others
Gas Flow: 0-25 L/min, 0-30 L/min
Rated load persistency rate: 100%
Operation pressure of safety valve: 0.65 – 0.8MPa (i.e. 6.5 – 8 kgf/cm²)

300A Welding clamp

Chrome-plated copper tape ground wire clamp
This grounding clamp is electroplated and has good wear resistance
Using high-quality copper, good conductivity
Easy to assemble and use
Stable performance and high reliability
Perfect replacement parts for manual welding machine
Purpose: electric welding processing
Current capacity: 300A
Jaw capacity: 10—55mm
Length:170mm
Product net weight: 0.120kg

Made in China

Code: 30508

500A Welding clamp

Chrome-plated copper tape ground wire clamp
This grounding clamp is electroplated and has good wear resistance
Using high-quality copper, good conductivity
Easy to assemble and use
Stable performance and high reliability
Perfect replacement parts for manual welding machine
Purpose: electric welding processing
Current capacity: 500A
Jaw capacity: 10—65mm
Length: 215mm
Product net weight: 0.280kg

Made in China

Code: 30509

2.0mm Collet body for TIG Welding Torch 

Welding capacity: 150A DC 120A AC
Premium quality
For use with 1/8" tungsten electrode
Diameter: 2.0 mm
Length: 47mm
Material: copper

Made in China

Code: 60952

2.4mm Collet body for TIG Welding Torch 

Welding capacity: 150A DC 120A AC
Premium quality
For use with 1/8" tungsten electrode
Diameter: 2.4 mm
Length: 47mm
Material: copper

Made in China

Code: 60953

3.2mm Collet body for TIG Welding Torch

Welding capacity: 150A DC 120A AC
Premium quality
For use with 1/8" tungsten electrode
Diameter: 3.2 mm
Length: 47mm
Material: copper

Made in China

Code: 60954

0.8 mm Contact nozzle for MIG/MAG welding machine M6 x 25 mm

Total length: 25 mm
Diameter: 6 mm
Thread: M6
Wire diameter: 0.8 mm

Made in China

Code: 60955

200A Inverter welding machine IGBT technology MMA-200PIS

• Inverter IGBT technique makes the welder more strong with compact size but much high duty cycle.
• Inverter technique makes the welderruns in high utilization rate of power.
• Low open circuit loss and has good welding quality.
• Suitable for MMA welding of low carbor and low alloy steel with all kinds of welding rod.
• Specification:
  Mains voltage: 220 V
  Frequency: 50-60 Hz
  No-load voltage: 56 V
  RAted input capacity: 8.3 kVA
  Insulation class: F
  Output current: 20 – 200 А
  Rated duty cycle: 60 %
  N.w.: 7 kgs

250A Inverter welding machine IGBT technology MMA-250IS Inverter IGBT technique makes the welder more strong with compact size but much high duty cycle. Inverter technique makes the welderruns in high utilization rate of power. Low open circuit loss and has good welding quality. Suitable for MMA welding of low carbor and low alloy steel with all kinds of welding rod.