HAND TOOLS

450 g Rubber hammer, 111859
Black rubber
Has high mechanical strength, is resistant to external aggressive environments and absorbs vibrations well.
Rubberised fibreglass handle against slipping.
Application: For installation and assembly work, as well as for laying floor, wall and paving tiles.

Made in China

200mm Long nose pliers, 171689

Semi-round nickel-plated straight jaws
Two-piece handle
Material: Cr-V
Length: 200mm
For a wide range of assembly work

Made in China

9 pcs Hex ball point long key set (mm), 112339

Content: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm

Material: Cr-V

Made in China

400 g Hammer with wooden handle, 102309
Square forehead
Lacquered head with black lacquer
The head has a hardness of 55HR and is made of grade 50 steel.
Firmly fixed to the handle using a wedge and special epoxy glue.
Two-tone wooden handle, protected from drying out with colourless lacquer.

Made in China

9pcs Extra Long TORX key set, 123079

Contents: T10, Т15,Т20,Т25, Т27, Т30, Т40, Т45 и Т50 - TORX.

Satin finish Material: Cr-V alloy with hardness 50 HRС

Extra long, attached to a clip, convenient for storage and transport.

Made in China

130 mm Mini side cutting pliers, 178149

Two - components handles
Nickel plated
Auto - unclamping
Side-cutting pliers are nickel plated
Hardness of cutting edges is 53 HRc
The tools are supplied with especially shapred two-components handles, relieving the working process.
Side-cutting pliesr are used for wire cutting

Produced by MTX China

Rubber coated key for drill chuck 13 mm, 168869

Suitable fo all key chucks with the maximum champing size of 13 mm

Made in China

9pcs Long TORX key set, 123069

Contents: T10, Т15,Т20,Т25, Т27, Т30, Т40, Т45 и Т50 - TORX.

Satin finish

Material: Cr-V alloy with hardness 50 HRС

Long.

Made in China

Double ended tubular hexagon socket wrench 17x19 mm, 137189

With hexagonal shaft and hole, designed for turning and tightening with steel bar or wrench
Zinc Finished

Made in China

Rubber coated key for drill chuck 13 mm, 168899

Suitable fo all key chucks with the maximum champing size of 16 mm

Made in China

9pcs Short TORX key set, 123059

Contents:
T10, Т15,Т20,Т25, Т27, Т30, Т40, Т45 и Т50 - TORX.
Satin finish
Material: Cr-V alloy with hardness 50 HRС
Short.

Made in China

Double ended tubular hexagon socket wrench 14x15 mm, 137169

With hexagonal shaft and hole, designed for turning and tightening with steel bar or wrench
Zinc Finished

Made in China

250mm Hand Riveter for 2.4-3.2-4.0-4.8mm rivet, 405249

Designed for blind rivet installation to join two or more layars of material.
Operating instruction:
- Drill holethrough materials to be fastened.
- Insert rivet head into the prepared hole completely.
- Squeeze tool handle until rivet mandrel breaks off.
- Open tool handle fully to eject rivet mandrel from tool.

Made in China

F-clamp 120x800 mm, 204089

- Corrosion - prof body coating
- Serrated slide reliable retention screw
- Two-component ergonomic handle

100g Bench Hammer with Fiberglass handle, 103159

Head Material: Steel Mark 50.
Working surface hardness of the head: 57 HRc in a layer with a depth of not less than 5 mm,. Respond the requirements of ГОСТ 2310-77
The hammer head is forged, milled, sanded and painted for corrosion protection.
The handle is two-component and made of fiberglass with high mechanical strength (10 times stronger than wood) and is resistant to oils, gasoline and solvents.

Made in China