HAMMERS, CUTTING TOOLS AND ECT.
450 g Rubber hammer, 111859
450 g Rubber hammer, 111859
Black rubber
Has high mechanical strength, is resistant to external aggressive environments and absorbs vibrations well.
Rubberised fibreglass handle against slipping.
Application: For installation and assembly work, as well as for laying floor, wall and paving tiles.
Made in China
400 g Hammer with wooden handle, 102309
400 g Hammer with wooden handle, 102309
Square forehead
Lacquered head with black lacquer
The head has a hardness of 55HR and is made of grade 50 steel.
Firmly fixed to the handle using a wedge and special epoxy glue.
Two-tone wooden handle, protected from drying out with colourless lacquer.
Made in China
100g Bench Hammer with Fiberglass handle, 103159
100g Bench Hammer with Fiberglass handle, 103159
Head Material: Steel Mark 50.
Working surface hardness of the head: 57 HRc in a layer with a depth of not less than 5 mm,. Respond the requirements of ГОСТ 2310-77
The hammer head is forged, milled, sanded and painted for corrosion protection.
The handle is two-component and made of fiberglass with high mechanical strength (10 times stronger than wood) and is resistant to oils, gasoline and solvents.
Made in China
200g Bench Hammer with Fiberglass handle, 103179
200g Bench Hammer with Fiberglass handle, 103179
Head Material: Steel Mark 50.
Working surface hardness of the head: 57 HRc in a layer with a depth of not less than 5 mm,. Respond the requirements of ГОСТ 2310-77
The hammer head is forged, milled, sanded and painted for corrosion protection.
The handle is two-component and made of fiberglass with high mechanical strength (10 times stronger than wood) and is resistant to oils, gasoline and solvents.
Made in China
300g Bench Hammer with Fiberglass handle, 103209
300g Bench Hammer with Fiberglass handle, 103209
Head Material: Steel Mark 50.
Working surface hardness of the head: 57 HRc in a layer with a depth of not less than 5 mm,. Respond the requirements of ГОСТ 2310-77
The hammer head is forged, milled, sanded and painted for corrosion protection.
The handle is two-component and made of fiberglass with high mechanical strength (10 times stronger than wood) and is resistant to oils, gasoline and solvents.
Made in China
500g Bench Hammer with Fiberglass handle, 103309
500g Bench Hammer with Fiberglass handle, 103309
Head Material: Steel Mark 50.
Working surface hardness of the head: 57 HRc in a layer with a depth of not less than 5 mm,. Respond the requirements of ГОСТ 2310-77
The hammer head is forged, milled, sanded and painted for corrosion protection.
The handle is two-component and made of fiberglass with high mechanical strength (10 times stronger than wood) and is resistant to oils, gasoline and solvents.
Made in China
800g Bench Hammer with Fiberglass handle, 103509
800g Bench Hammer with Fiberglass handle, 103509
Head Material: Steel Mark 50.
Working surface hardness of the head: 57 HRc in a layer with a depth of not less than 5 mm,. Respond the requirements of ГОСТ 2310-77
The hammer head is forged, milled, sanded and painted for corrosion protection.
The handle is two-component and made of fiberglass with high mechanical strength (10 times stronger than wood) and is resistant to oils, gasoline and solvents.
Made in China
1000g Bench Hammer with Fiberglass handle, 103609
1000g Bench Hammer with Fiberglass handle, 103609
Head Material: Steel Mark 50.
Working surface hardness of the head: 57 HRc in a layer with a depth of not less than 5 mm,. Respond the requirements of ГОСТ 2310-77
The hammer head is forged, milled, sanded and painted for corrosion protection.
The handle is two-component and made of fiberglass with high mechanical strength (10 times stronger than wood) and is resistant to oils, gasoline and solvents.
Made in China
1500g Bench Hammer with Fiberglass handle, 103639
1500g Bench Hammer with Fiberglass handle, 103639
Head Material: Steel Mark 50.
Working surface hardness of the head: 57 HRc in a layer with a depth of not less than 5 mm,. Respond the requirements of ГОСТ 2310-77
The hammer head is forged, milled, sanded and painted for corrosion protection.
The handle is two-component and made of fiberglass with high mechanical strength (10 times stronger than wood) and is resistant to oils, gasoline and solvents.
Made in China
2000g Sledge Hammer with fiberglass handle, 109219
Head material steel 50 is covered with black polish.
Head surface hardness: selectively tempered, providing special hardness and strength (52 HRc). The head is slightly convex and sanded on both sides.
Two-component fiberglass handle, shock absorbing impact.
The rubber cover of the handle prevents the hand from slipping and provides a comfortable and secure grip. It is resistant to oils, gasoline and solvents.
Made in China
Flat chisel "Tiger's eye" 16 mm, 245119
Flat chisel "Tiger's eye" 16 mm, 245119
Made of alloy steel, grade 65 Mn
Two-component rubber coated handle.
There is a metal backplate and lattice bar allowing the tool to be hammered.
Made in China
450 mm Wood saw with hardened teeth, 235419
450 mm Wood saw with hardened teeth, 235419
Made of cold rolled steel grade 65 Mn with hardened tooth hardness of 50-65 HRc.
Laser sharpened hardened teeth.
Ergonomic rubberized handle.
Made in China
Cutting saw 450 mm with ruler, 235025
Cutting saw 450 mm with ruler, 235025
Made of cool-rolled steel.
The teeth are tampered.
Two-component handle.
Metal brush with wood handle, 748265
Metal brush with wood handle, 748265
For rough but moderate trimming of metal surfaces.
Blade: 120mm
Overal lenght: 290mm
Made in China