PAINTS, PRIMERS, THINNERS, PUTTY

Light zinc 400 ml, Z350

A high molecular weight cold-bed galvanizer that chemically crystallizes to form a long-lasting metallic finish.
Protects all metallic surfaces from oxidation.
It also forms a stable layer that can be painted or left as a final protective layer.
Ideal for finishing, repair of galvanized parts, etc.

Dark zinc 400 ml Z351

Features: Organic galvanizer with a synthetic resin base containing high quantity of pure micronized zinc and aluminium
used to obtain enough light shade color. The high zinc content provides the product an excellent corrosion resistance.
The product can be used either as a finisher or painted over.

Inox - Stainless steel spray Z352

Alkid and silicone resin - based coating that forms a protective layer.

Formulated to remain inalterated over time with exceptional resistance to chemical corrosion and atmospheric agents and good mechanical strenght.

Quick drying coating.

Features:
Aerosol in a 15-bar tin can
Net Content: 400 ml
Heat resistance: + 300 ° C
Color: Inox
Odor: Characteristics of solvent
Relative density at 20 ° C 0.75 - 0.80 g / ml
Flash point <0 ° C
Pressure at 20 ° C 5.0 ± 1.0 bar
Dry zinc residue - 7.5%
Drying time: For dust and fine particles - 10 min.
At touch - 20 min.
In Depth - 22 hours

HIGH TEMPERATURES PAINT 400 ml

High Quality Enamel from the Ambro-Sol “Paint” line, this paint resists high temperature and is ideal for painting
surfaces of ovens, stoves, grills, flues. It’s ideal not only for products found at home but the steel industries, auto
body repairman and forge industries.

It is a high quality enamel with a modified silicone resin base, which allows you to renew all surfaces normally exposed to high temperatures. Heat resistant up to 300°C-700°C (check the Technical data sheet). Application: parts of heaters, stoves, ovens, chimney flues, barbecues, fire screens, motorcycle mufflers, etc. don’t expose in direct contact with flames. Important: to obtain an optimal and long lasting result it is necessary for the painted parts to be exposed even if only once, to a temperature of at least 180°C; any less will make the hardening and adhesion of the enamel only partial. Clean carefully the surface before application and shake vigorously the can. After use, it’s advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the nozzle.

Nitro Thinner

Nitro Thinner is specifically designed for washing and degreasing mechanical parts, as well as for cleaning surfaces, paint brushes and more.
It can also be used to thenning nitrocellulose paints and undercoats, corrosion inhibitors and more.
Compatible with VOC Directive 2004/42 / EC.

Available in 1 l and 5 l containers.

Made in Italy