GARAGE TOOLS AND EQUIPMENT

5l Plastic Fuel Can, 75089

Ideal for the storage of petrol and diesel.
Manufactured from high-density polyethylene (HDPE).
Complete with a flexible pouring spout.
Capacity: 5 L
Size: 240 (L) x 140 (W) x 240 (H) mm
Weight: 0.320 kg

Made in China

80uF 450vac 50/60Hz Motor Running Capacitor for motor power unit car lift

Applicable to most models of power units for two and four-post car lifts.

It is recommended to replace the start capacitor when replacing this capacitor.

Made in China

10” Wheel Balance Plier, 50410

Features:
High quality tool for removing and placing balancing weights.
PVC-dipped handles for comfort and extra grip,
Overall length: 240 mm (10 ”)

Made in China

4 ton Solid Negel Jack 4000F Electro-hydraulic 2-post lift, floor plate + 4*85 mm Adapters

Driving Mode:
●Dual hydraulic cylinders, chain driv
Engagement Release Mode:
 ●Dual point manual lock release
Arm Assembly:
●Two-stage telescoping lifting long arms
●Thre-stage telescoping lifting short arms
  Three-stage front and two-stage rear telescopic lifting arms giving the advantage of servicing cars with a small wheelbase. With this, the scope of the hoist obtains convenient functionality for all gauges of passenger cars, vans, mini vans and small trucks.
● Double Threaded lifting pads
Safety Mechanism:
●Automatic arm lock restraints
●Mechanical safety latch with 5cm interval in each post
●Parachute valve under each cylinder in case of hydraulic hose fracture
●Relief valve to prevent overloading
●Door opening protection rubber
●Up-limit switch
●Synchronization cable
Control System:
●Lifting operation by pressing the “UP” button on motor
●Manual lowering operation by pressing the lever on power pump

Car creeper

Lenght: 40 Inch

N.W.: 7.400 kgs

Battery charger DFC-20

Use great power silicon controlled rectifier for pulse recharging.

Use advanced circuit design, high efficiency, long life ext. Used for motorcycle, car, vessel, factory and various of storage battery recharging.

Technical data:

Input voltage - 220V

Output voltage: 12/24V

Charging current: 8/12А

Max. Charging current: 20А

Function: Charging

Charging Input power: 450W

Code: 30235

Hydraulic shop press, 20 t, 55004

Capacity: 20 t

Working range: 0-955 mm

Wight: 550 mm

N.W.: 90 kgs

10l Plastic Fuel Can, 75090

Ideal for the storage of petrol and diesel.
Manufactured from high-density polyethylene (HDPE).
Complete with a flexible pouring spout.
Capacity: 10 L
Size: 320 (L) x 155 (W) x 305 (H) mm
Weight: 0.650 kg

Made in China

60uF 450vac 50/60Hz Motor Running Capacitor for motor power unit car lift

Applicable to most models of power units for two and four-post car lifts.

It is recommended to replace the start capacitor when replacing this capacitor.

Made in China

Triple Bag Air Jack 3 Ton, 55066

Capacity: 3000 kgs
Min. Height: 150 mm
Max. Height: 400 mm
Bag diameter: 250 mm
3 bags
Working pressure: 8 - 12 Bar
Safety valve
Air Inlet :1/4
Time up/down: 3-5 sec
Temperaturw range: -60 +50°C
N.W.: 20 kgs

Made in China

Computerized Car wheel balancer JH-60C, 51421

Technical parameters:
Max Wheel Weight – 65 kg
Max Wheel Diameter: 1000 mm (39")
Motor power – 250 W
Voltage – 220V/ single phase; 50/60 Hz
Balancing Precision – 1 g
Balancing speed - 200 rpm
Max Rim Diameter - 10"- 24" (254 – 610 mm)
Max Wheel Width - 1,5"- 16" (40 – 406 mm)
Balancing cycle – 8 sec.
Level of Noise - < 70 db
N.W.: 93 kg
Temperature - -5 ° C ~ 50 ° C
G.W.: 128 kg

Charger and starter transformer battery DFC-650

Use great power silicon controlled rectifier for pulse recharging.

Use advanced circuit design, high efficiency, long life ext. Used for motorcycle, car, vessel, factory and various of storage battery recharging.

Can start the motor and engine.

Input voltage ……………220 V

Outout voltage …………..12/24 V

Charging current ………………………60/70 А

Max Charging current ………..100 А

Function…………………………зареджане /стартер

Starting current ……………………...480 А

Charging input power …………2200 W

Starting input power ……….. 12500 W

4 ton Solid Negel Jack Electro-hydraulic 2-post lift, floor plate + 4*100 mm Adapters

Driving Mode:
●Dual hydraulic cylinders, chain drive
Engagement Release Mode:
 ●Dual point manual lock release
Arm Assembly:
●Two-stage telescoping lifting arms
●Threaded lifting pads
Safety Mechanism:
●Automatic arm lock restraints
●Mechanical safety latch with 5cm interval in each post
●Parachute valve under each cylinder in case of hydraulic hose fracture
●Relief valve to prevent overloading
●Door opening protection rubber
●Up-limit switch
●Synchronization cable
Control System:
●Lifting operation by pressing the “UP” button on motor
●Manual lowering operation by pressing the lever on power pumpydraulic 2-post lift, floor plate

Hydraulic shop press, 30 t, 55005

Capacity: 30 t
Working range: 0-1050 mm
Width: 460 mm
N.W.: 120
The shop press is a blue color.

20l Plastic Fuel Can, 75091

Ideal for the storage of petrol and diesel.
Manufactured from high-density polyethylene (HDPE).
Complete with a flexible pouring spout.
Capacity: 20 L
Size: 420 (L) x 180 (W) x 380 (H) mm
Weight: 0.980 kg

Made in China