CAR BODY REPAIR TOOLS

Magnetic Fender Cover, 50270

Fatures: To protects the vehicle fender during repair work.

Size: 790х590 mm

Made in China

Air vacuum dent puller with 3 pads, 178-0169A

Contents:

3 pads: 75 mm, 100 mm, 125 mm

Working pressure: 5 - 12 Bar (70 - 170 Psi)

Made in Taiwan

Manual operation dent puller with 10 pcs glue pads, 160-3113

Perfect hand tool for repairing small dents on the vehicle compartment.

Contains: Adjustable clamp with plastic protectors and aluminum housing and 10 pcs. removable pads.
Rotating pads provide stability when working on non-linear surfaces.

How it works can be seen in the following video:

Made in Taiwan

Mini sliding hammer with 10 pcs glue pads, 160-3123

Complete with 10 pcs glue pads and a mini sliding hammer for reducing small dents on the vehicle body. It is recommended for manual operation.
Contents:
Mini sliing hammer 0.95LB (0.43 kgs }
10 pcs Glue Pads (Plastic Connectors)

Made in Taiwan

Adaptor +10 pcs Small Damage Repair Kit, 160-0211

The kit contains an adapter and 10 pcs removable pads, of different shapes and sizes, suitable for straightening small recesses in the car body.

Made in Taiwan

Windshield Removal Tool Set, 50220

This universal kit includes all of the specialised tools required to safely and quickly remove windshields from a wide variety of vehicles.
Item is supplied with a rubber gasket knife, cutting wire, two (2) handles, wire feeder tool, trim pad remover and molding release tool.

Set includes:

- Wire: Three strong galvanised steel wires braided to form one wire
- 2 pcs Wire gripping handles: Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held.
- Windshield removal tool: Cuts the vinyl adhesive compound around the windshield.
- Wire feeder tool: Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield
- Trim pad remover: Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.
1PC stainless steel wire with reel.
2PCS Wire gripping handles.
1PC Windshield removal tool
1PC Wire feeder tool
1PC Trim pad remover
1PC Windshield molding release tool

Made in China

Windshield Removal Tool Set, 318-0185

This universal kit includes all of the specialised tools required to safely and quickly remove windshields from a wide variety of vehicles.

Item is supplied with a rubber gasket knife, cutting wire, two (2) handles, wire feeder tool, trim pad remover and molding release tool.

Set includes:

- Wire: Three strong galvanised steel wires braided to form one wire
- 2 pcs Wire gripping handles: Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held.
- Windshield removal tool: Cuts the vinyl adhesive compound around the windshield.
- Wire feeder tool: Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield
- Trim pad remover: Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.
1PC stainless steel wire with reel.
2PCS Wire gripping handles.
1PC Windshield removal tool
1PC Wire feeder tool
1PC Trim pad remover
1PC Windshield molding release tool

Made in Taiwan.

Hydraulic porta power jack, 10 t

 Min. height: 150mm

 Max. height: 470mm

Door upholstery tack remover 031-A611201

Designed to remove the car door panel. Convenient extended handle.

Made in Taiwan

2 Pcs Car Door Panel Trim Upholstery Clip Remover Tool, 50935

For easy remove door panel clips, upholstery, and trim without damage.

Convenient extended handle.
Made of heat-treated carbon steel.
Overal lenght: 240 and 260 mm

Made in China

Auto body repair pull clamp (Two way),113-01027NN

Compact and suitable for use in different spaces.
With two-way direction:
-Cross capacity: 2 tons
- Longitudinal capacity: 3 tons
- Gripping Surface: 37mm (wide) / 15mm (deep)
- Material: Cr-Mo
Bolt size: 14 mm x 120 mmL
Zinc plated. Corrosion resistant.

Made in Taiwan

Auto body repair pull clamp (Two way),113-01017C

Compact and suitable for use in different spaces.
With two-way direction:

-Cross capacity: 2 tons
- Longitudinal capacity: 5 tons
Bolt size: 16 mm x 70 mmL
Zinc plated. Corrosion resistant.

Made in Taiwan

Small mouth pull clamp, 113-01017A

Suitable for use in confined spaces.
One-way direction  of work.

Bolt size: 16 mm x 70 mmL
Capacity: 5 t
Zinc plated. Corrosion resistant.

Made in Taiwan

9 pcs Panel beating set, 50926

Made of high-grade high-carbon steel.
It contains 4 models of ergonomic grippers, as well as adapters, necessary to straighten the car's dents.
N.W. : 9.7 kgs

Made in: China

7 pcs Auto body repair set, 50209

Made of high-grade high-carbon steel.
It contains 3 models of ergonomic grippers, as well as adapters, necessary to straighten the car's dents.
Contains:
1pc standard bumping hammer
1pc pick and finish hammer
1pc reverse curve hammer
1pc curved dolly
1pc utility dolly
1pc double end hand dolly
1pc shrinking dolly.
Made in China