ENGINE TIMING TOOLS
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
BMW N47/N57 2.0, 3.0 - Chain Drive - Diesel Engine Setting/locking Kit, 50344A
Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A
Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.
Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)
Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0
OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760
Made in China
SUBARU 2.0; 2.5L и SAAB Camshaft Locking Tool, 50514
SUBARU 2.0; 2.5L и SAAB Camshaft Locking Tool, 50514
Applicable:
Subaru WRX and STi with 2.0L or 2.5L (2002+ )DOHC Turbo engines (EJ205, EJ207, EJ255, EJ257)
Subaru Forester XT (2003-2012) with DOHC Turbo engines
Subaru Liberty GT (2004-2009) with DOHC Turbo engines
Subaru Outback XT (2004-2009) with DOHC Turbo engines
Saab 9-2X Aero (2005-2006) with DOHC Turbo engines
Made in China
Hyundai/Kia, 2.5 diesel – High Pressure Fuel Pump Sprocket Remover, 50510
Hyundai/Kia, 2.5 diesel – High Pressure Fuel Pump Sprocket Remover, 50510
This tool is designed to hold the timing chain in place while removing the high pressure pump.
Applicable: Hyundai/Kia
Models:
Hyundai iLoad (TQ; 2007-present)
Kia Sorento BL (2003-2009)
Motors:
Hyundai D 2.5 TCI-A, Hyundai D 2.5 TCI-A2
Kia D 2.5 VGT, Kia D 2.5 WGT
OEM: 09331-4A000, 093314A000
Made in China
3/4" Dr. 19 mm 12-pt Impact deep socket, 50480
3/4" Dr. 19 mm 12-pt Impact deep socket, 50480
Material: Cr-Mo
12-points
Deep: 110 mm
Applicable: For Mercedes trucks cylinder head screw.
For models MB300, MB400, MB900
Code: 505132
VAG 1.8/2.0L Balance shaft puller, 50176
VAG 1.8/2.0L Balance shaft puller, 50176
For the safe removal of the balance shafts, fitted VAG 4-cylinder chain drive 1.8 and 2.0 injection engines.
Internal thread M8 x 1.25 for sliding hammer.
OEM tool: T10394
Applicable: VW, Audi, Seat, Skoda
VW:
VW Passat (2007-2017); VW Scirocco (2008-2017); VW Sharan (2011-2017); VW Tiguan (2007-2016); VW Beetle (2013-2017); VW CC (2012-2015); VW Eos (2008-2015); VW Polo (2014-2017); VW Touran (2015-2017); VW Golf (2007-2017); VW Jetta (2011-2014)
Audi:
Audi A1 (2015-2017); Audi A3 (2007-2017); Audi A4 (2007-2017); Audi A5 (2007-2017); Audi A6 (2012-2017); Audi A7 (2014-2017); Audi A8 (2012-2014); Audi Q3 (2011-2017); Audi Q5 (2008-2017); Audi TT (2008-2017); Audi Q7 (2015-2017); Audi S1 (2014-2017); Audi S3 (2013-2017)
Seat:
Seat Altea (2006-2015); Seat Exeo (2010-2013); Seat Ibiza (2015-2017); Seat Leon (2007-2017); Seat Toledo (2007-2017)
Skoda:
Skoda Octavia (2007-2017); Skoda Superb (2008-2017); Skoda Yeti (2009-2015)
Engine code:
1.8: BZB, CDAA, BPU, BYT, CABA, CABB, CDHA, CDHB, CABD, DAJB, CJSA, CJSB, CJEB, CJEE, CJED, CYGA, DAJA, CDAB, CJSC, CGYA
2.0: CAWB, CCZA, CBFA, CCTA, CDNB, CDNC, CFKA, CHJA, CCZC, CPSA, CESA, CETA, CNCD, CYRB, CYRC, CNCE, CYNB, CYPA, CYPB, CULB, CULC, CNCB, CWZA, CJXF, CJXC, CJXB, CJXG, CHHC, CCZD, CJKA, CJKB
Made in China
14 mm 3/8”Dr. Spark plug socket, 50007F
14 mm 3/8”Dr. Spark plug socket, 50007F
Ideal for Installing and removing spark plugs.
Special spring clip design to hold the spark plug.
Size: 3/8" Drive x 14m
12-Point
Material: Cr-V
Made in China
Porsche Cayenne M97/01 Camshaft tools, 50869
Porsche Cayenne M97/01 Camshaft tools, 50869
Features: For correct fixing the camshaft of the Porsche Cayenne M97 / 01 when replacing the timing belt.
Applicable: Porsche 4.5L with M97/1 engine
OEM No.: 9678
Made in China
Ford Mondeo / Transit Fuel Injection Pump Sprocket Locking Tool, 50940
Fuel Injection Pump Sprocket Locking Tool - Ford Mondeo / Transit, 50940
Features: To lock the fuel injection pump sprocket during fuel pump removal and installation. Suitable for Ford Duratorq(Puma) 2.0, 2.2, 2.4 diesel engines.
Applications:
Ford Mondeo (10/2000-02/2007)
Ford Transit (01/2000-05/2006)
Ford Transit (04/2006-)
Engines:
2.0L Duratorq-DI Puma Diesel
2.0L Duratorq-TDCi Puma Diesel
2.0L Duratorq-TDDi Puma Diesel
2.2L Duratorq-TDCi Puma Diesel
2.4L Duratorq-DI Puma Diesel
2.4L Duratorq-TDCi Puma Diesel
2.4L Duratorq-TDDi Puma Diesel
OEM#: 303-1151
Made in China
VAG Coolant Pump Thermostat Wrench, 50907
VAG Coolant Pump Thermostat Wrench, 50907
Features: To easy removal and installation of thermostat without causing any unnecessary damage.
Applicable: Audi A3 2013> , VW Golf 2013 >, Skoda Octavia 2013 >, Seat Leon 2013>
Engines: 1.0 TFSi 3-cyl, 1.2 TSi, 1.4 TFSi, 1.4 FSi, 1.4 TDiCR 3-cyl.
OEM Tool: T10508
Made in China
VAG Camshaft Gear Locking Tool - Camshaft sprocket locking tool, 50890
VAG Camshaft Gear Locking Tool - Camshaft sprocket locking tool, 50890
Features: For locking the camshaft in adjusting position required for checking and adjusting the engine timing
Applicable:
Seat Mii 1.0 (3 cylinder) - (from 2012)
Skoda Citigo 1.0 (3 cylinder) - (from 2011)
Volkswagen Up 1.0 (3 cylinder) - - (from 2011)
Engine code: 1.0 CHYA (44 kW), 1.0 CHYB (55 kW), 1.0 CPGA (50 kW)
OEM Tool: T1047
Made in China
Land Rover / Jaguar 3.0 3.5 4.0 4.2 & 4.4 V8 – Engine timing tool set, 50833
Land Rover / Jaguar 3.0 3.5 4.0 4.2 & 4.4 V8 – Engine timing tool set, 50833
Features: To hold camshaft during timing chain replacement.
Application:
Land Rover:
Gas 4.2 / 4.4 V8 Chain
Engine: AJ34
New Range Rover - LM (06-08)
Range Rover Sport - LS (05-08)
Discovery III - LA (05-08)
Jagular:
Gas 3.2 / 3.5 / 4.0 / 4.2 V8 Chain
Engines:
AJ26, AJ27, AJ28, AJ34
XJ (97-08)
S-Type (99-08)
XF (08-)
XK (97-08)
Note: This does not work for the Range Rover, BMW Engines.
Made in China
VAG 1.8 /2.0L (EA888) FSI/TFSI – Engine timing tool set, 50832
VAG 1.8 /2.0L (EA888) FSI/TFSI – Engine timing tool set, 50832
Features: For Camshaft Locking tools for Audi VW SKODA VAG 1.8 2.0 TFSI EA888 SF0233.
Applications: VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, VW CC, VW Scirocco, VW Golf Mk6 GTI, VW Scirocco, VW Passat B6, VW CC
Use for correct the camshaft and crankshaft timing position.
Four-cylinder EA888 petrols: 1.8L R4 16v TSI/TFSI, 2.0L R4 16v TSI/TFSI, 2006~2013 VAG series TSI, TFSI EA888 engine(1.8L, 2.0L).
OEM Tools:
T10352, T10352/1, T10352/2, T10368, T40196, T10354, T10060A, T40011, T40265, T40267, T40271
1.8 R4 16v TSI/TFSI (EA888)
Applications:
Audi TT Mk2 (8J), Audi 8P A3, Audi B7 A4, Audi A4 (B8), Audi A5
SEAT Leon Mk2 (1P), SEAT Altea XL
Škoda Yeti, Škoda Octavia Mk2 (1Z, Ming Rui), Škoda Superb Mk2 (3T)
VW Jetta Mk5/Sagitar, VW Passat B6, VW Passat CC
2.0 R4 16v TSI/TFSI (EA888)
Applications:
VW Golf Mk5 GTI (North American markets only)
VW Golf Mk6 GTI (North American markets only)
VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, VW CC, VW Scirocco, VW Golf Mk6 GTI, VW Scirocco, VW Passat B6, VW CC
Audi A3 (8P), Audi A3 Cabriolet, Audi TT, Audi A4 (B8), Audi Q5, Audi A5, Audi Q5, Audi TT Mk2 (8J), Audi Q3
Škoda Superb Mk2 (3T), Škoda Octavia
SEAT Altea Freetrack, SEAT Leon FR, SEAT Exeo
Engine Code:
BYT, BZB, CABA, CABB, CABD, CADA, CAEA, CAEB, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CDAA, CDAB, CDHA, CDHB, CDNB, CDNC, CDND, CESA, CETA, CFKA, CGYA, CJEB, CJBA, CJSB.
Contents:
T10352 – Camshaft Control valve removal tool
T10352/1 – Camshaft Control valve removal tool
T10352/2 – Camshaft Control valve removal tool
T10368 – Crankshaft Thrust piece
T40196 – Drift for camshaft slide pieces
T10354 – Pressure piece
T10060A – Auxiliary drive belt tensioner locking pin
T40011 – Tensioner locking pin
T40265 – Oil pump tensioner locking pin
T40267 – Timing chain tensioner
T40271 – Camshaft clamp (Exhaust & Inlet)
Made in China
Subaru Impreza Camshaft Pulley Holder, 50813
Subaru Impreza Camshaft Pulley Holder, 50813
Special wrench designed to hold the camshaft pulleys while removing and/or installing the central bolt.
The special design of this wrench avoids the possibility of damaging that pulley which has a composite plastic and steel construction.
The inner portion engages the intake camshaft gear on Non-AVCS engines.
Compare to Subaru Factory Tool #499207400 & #499207400-A
Size: 12pt/63mm
Lenght: 48cm/19-Inch
Application on Subaru Impreza EJ20 engine.
Subaru: Impreza WRX/STI (2002-2007); Impreza WRX (2008-2015); Forester XT (2004-2008); Legacy GT (2005-2010); Outback XT (2005-2010); Baja (2004-2006) Saab: 9-2X (2005-2006)
This tool will not fit the 2005 2.0 Turbos with Variable Camshaft Timing
Made in China
BMW N20 N26 1, 2, 3, 4 Series - Balance Shaft & Oil Pump Alignment Tool Kit, 50790
BMW N20 N26 1, 2, 3, 4 Series - Balance Shaft & Oil Pump Alignment Tool Kit, 50790
Function : For aligning the balancer shaft and holding the chain sprocket for removing and installing the oil pump or chain during chain repairs. Constructed with high standard Steel, which has an unparalleled lifespan with great durability.
Applications:
BMW 1 Series (2012-2016), 2 series (2014-2016), 3 series (2012-2016), 4 series (2014-2016), X1 (2011-2015), X3 (2011-2017), X4 (2014-2017), Z4 (2011-2017)
Engine codes: N20 and N26 1.6L/2.0L petrol engines
OEM No. 2 212 825, 2 318 117, 11 4 120
Made in China
Citroen C3 Peugeot 208, 308, 2008 SUV, Psa 1.0 1.2 Vti - Timing Tool set for Petrol, 50648A
Citroen C3 Peugeot 208, 308, 2008 SUV, Psa 1.0 1.2 Vti - Timing Tool set for Petrol, 50648A
Designed to hold the camshafts and crankshaft in their timed position during belt replacement.
Designed for the latest generation Citroën / Peugeot EB0 & EB2 1.0ltr and 1.2ltr 3 cylinder engines.
Content:
Camshaft Locking Tool
Crankshaft Timing Pin
OEM №: 0109-2A, 0109-2B
Models:
Citroën:
C1 II (2014-2018); C3 III (2012-2017); C3 IV (2016-2018), C4 Cactus (2014-2018); C-Elysee (2012-2018); DS3 (2012-2017)
Peugeot:
108 (2014-2017); 208 (2012-2018); 2008 (2013-2018), 301 (2012-2015); 308 (2013-2018); 3008 (2016-2018); 5008 (2014-2017); Partner III (2015-2018)
Toyota:
Aygo (2014-2018)
Engine Codes:
1.0 VTi: EBO(ZMZ), EBOF(ZMZ), ZMZ(EBO)
1.2 VTi: 1PP(HM01), EB2 (HMZ), EB2DTS(HNY), EB2 (HMW), EB2M (HMY), EB2 (HMZ), EB2DTS(HNY), HMP (EB2FB), HMT(EB2D), HMU(EB2D), HMV (EB2M), HMY (EB2M), HMZ (EB2), HMZ (EB2D), HMZ (EB2F)
1.2 E-VTi: HMZ (EB2F), EB2F (HMZ)
1.2 PureTech THP: HNZ (EB2DT)
1.2 PureTech VTi: EB2D(HMT), EB2F(HMZ), EB2DTS(HNY), EB2M(HMY)
Made in China
Fuel Synchronization test set, 50504
Fuel Synchronization test set, 50504
Designed for synchronization of automobile, motorcycle and other carburetor engines as well as injection engines.
Allows even adjustment of the amount of mixture in the individual cylinders and thus regular engine operation Pressure gauges can measure both vacuum and pressure. The vibration intensity of the indicator when the engine is running is regulated by the gas valves.
The kit includes the most used adapters that you can use when tuning several types of motorcycles.
Contents:
4 pcs. gauges - diameter 85 mm, fixed on the plate
4pcs. rubber hoses 8x5 with a length of 750 mm
4 extension tubes 3.9x52 mm
4 extension tubes 3.9x122 mm
8 pcs. Conical type connectors 8x40 mm
4 pcs. tubes 10x53 mm (M6X0.75)
4 pcs. tubes 10x60 mm (M6X1.0)
Made in China