ENGINE TIMING TOOLS
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
BMW N47/N57 2.0, 3.0 - Chain Drive - Diesel Engine Setting/locking Kit, 50344A
Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A
Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.
Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)
Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0
OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760
Made in China
5 Pcs 1/2" Dr. Mercedes Specialized Socket Set, 50459
5 Pcs 1/2" Drive Mercedes Specialized Socket Set, 50459
Applicable:
For servicing gearboxes, differential, front axle bearing, rear axle flange on most Mercedes-Benz vehicles.
Material: Cr-V
Contents:
(A): 8 mm tooth x 70 mmL - For Mercedes gearbox flange.
(B): 6 mm tooth x 70 mmL - For Mercedes differential flange.
(C): 6 mm tooth x 70 mmL - For front axle wheel bearing of Mercedes G-Class (W460 / W461 / W463)
(D): 6 mm tooth x 70 mmL - For Mercedes W107, W114, W115, W116.
(E): 8 mm tooth x 80 mmL - For rear axle of the drive shaft flange of Mercedes W116, W123, W126.
Made in China
Flexible hose clamp pliers, 50343
Flexible hose clamp pliers, 50343
Use to remove and install self tightening hose clamps in hard-to-reach areas.
Locking mechanism.
One-handed use.
Capacity of hose clamps with a diameter of 18 - 54 mm (11/16 "-2 1/8").
Flexible wire: 640 mm
Made in China
6” Piston ring pliers, 50335B
6” Piston ring pliers, 50335B
Universal design - can be used on most vehicles.
Smooth gripping edge - to prevent damage to the piston rings.
Capacity: 80 - 120 mm
Made in China
8” Piston ring pliers, 50335C
8” Piston ring pliers, 50335C
Universal design - can be used on most vehicles.
Smooth gripping edge - to prevent damage to the piston rings.
Capacity: 110 - 160 mm
Made in China
Saab & Vauxhall / Opel 2.5, 2.6, 3.0, 3. V6 - Belt Drive Petrol Engine Setting / Locking Kit, 50303
Saab & Vauxhall / Opel 2.5, 2.6, 3.0, 3. V6 - Belt Drive Petrol Engine Setting / Locking Kit, 50303
Features:
Suitable for locking engine and checking timing marks on V6 EcoTec multi-valve engines.
Maintains crankshaft gear and camshaft sprockets at TDC position for cam-belt work.
Features a belt guide roller adjuster.
Applications:
Saab: 9000 2.5 V6 (9-5) 3.0 V6 (98-03)
Vauxhall / Opel: Calibra 2.5 V6 (93-98), Cavalier 2.5, 2.6 V6 (93-95), Omega-B 2.5, 2.6, 3.0, 3.2 V6 (94-03), Signum 3.2 V6 (03-05), Sinatra 3.0 V6 96-99), Vectra-A / B / C 2.5, 2.6, 3.2 V6 (93-05)
Engine Codes:
Saab: B258, B308, B308E
Vauxhall / Opel: X25XW, X30XE, Y26SE, Y32SE.
Made in China
Ford Duratec – Crankshaft Pulley Holding Tool, 50291
Ford Duratec – Crankshaft Pulley Holding Tool, 50291
Features: Specially designed tool for holding the crankshaft pulley when it is loosened / tightened.
Suitable for Ford / Lincoln / Mercury 2.0 petrol engines; 2.3; 2.5 and hybrid engines.
OEM number: 303-1416
Made in China
Ford Petrol and Diesel Engines Flywheel Locking Tool, 50288
Ford Petrol and Diesel Engines Flywheel Locking Tool, 50288
Features: Applicable for use on a larger model group in the Ford range in both petrol and diesel engines.
The set includes:
Locking tool - OEM 21-168 / 303-393
Adapter - 303-393-01
Adapter - 303-393-02
Application: Suitable for the following FORD models:
- Focus 2.0 TDCi
- Focus C Max 2.0 TDCi
- Focus 1.6 T-VCT
- Focus C Max 1.6Ti-VCT
- Fiesta 1.8 D Turbo
- Focus 1.8 / Tdi / TDCi
- Focus C Max 1.8 TDCi
- Toumeo Connect 1.8 TDDi / TDCi
- Transite Connect 1.8 TDDi / TDCi
Made in China
SUBARU Forester 2500 c.c. Camshaft Pulley Holder, 50223
SUBARU Forester 2500 c.c. Camshaft Pulley Holder, 50223
Features: To fixing the timing belt and easy to remove or install it. With three fixing points.
Application: SUBARU FORESTER 2500 c.c.
Made in China
Valve Spring Compressor Set for Motorcycle and Cars, 50101
Valve Spring Compressor Set for Motorcycle and Cars, 50101
Features: For disassembly and assembly of valves for cars, ATVs, vans, small marine engines and most motorcycle engines.
Comes complete with 5 pcs. metal collects of different sizes: 16 mm, 19 mm, 23 mm, 25 mm, 30 mm; 3 pcs. Extension screws; 1pcs. Compression bar / c-frame; Hand lever.
Made in China
OPEL 1.8; 2.0L - Camshaft locking tool, 9G1201
OPEL 1.8; 2.0L - Camshaft locking tool, 9G1201
Features:
Special locking tool for 1.8 / 2.0 16V EcoTec motors on:
Astra G / H | Frontera A | B | Omega B | Vectra A | B
VX220i Speedster | Zafi ra A / B. 2.0 | 2.2 16V gasoline engine
Engine code:
C20SEL | X20XEV | Z20LEH | LEL | LER | ATTENTION X22SE XE
Y22SE | XE | Z22XE (1996 - 2010)
OEM No. 853 KM
Produced by Force, Taiwan
20.6mm 1/2"Dr. Heavy duty spark plug socket, 807420.6
20.6mm 1/2"Dr. Heavy duty spark plug socket, 807420.6
Material: Cr-V reinforced steel
Suitable for all 1/2" ratchets and T-handles
Length: 65mm
Size: 20.6mm (3/4")
Produced by Force, Taiwan
VW 2.8L – Camshaft Locking Tool, 50950
VW 2.8L – Camshaft Locking Tool, 50950
Designed to lock the camshaft of the 2.8L diesel engines used in the popular Volkswagen LT van.
To check and adjust the valve time.
Applicable: Volkswagen LT Van 1997 to 2006 2.8lt.
Engine codes: AGK 1997 to 2006, ATA 1999 to 2006, AUH 2001 to 2006, BCQ 2002 to 2006.
OEM number 3445
Made in China
BMW B37/B38 – Balance Shaft Removal Alignment Tool, 50896
BMW B37/B38 – Balance Shaft Removal Alignment Tool, 50896
Basic tools for required to remove, replace and time the balance shaft on the new BMW 1.5, 1.2 and 1.5 petrol engines.
Application: Mini Clubman 2015 - 2017, Mini Convertible 2016 - 2017, Mini Clubman 2015 - 2017, BMW 1 and 3 series 2015 - 2017, 2 series 2014 - 2017, X1 2015 - 2017, i8 2015 - 2017
Engine codes:
B37 (diesel engines), B38 (petrol engines)
OEM tools: 2,288,943, 2,288,942 and 2,358,646
Made in China
31 pcs Wheel bearing removal tool kit, 50889
31 pcs Wheel bearing removal tool kit, 50889
Features:
Practical set of tools for disassembly and assembly of the hub and wheel bearings.
Makes installation easy and efficient as it eliminates the need to remove the knee and steering knuckle.
The tools are made of high quality heat-treated carbon steel for durability and long service life.
The set is provided in a convenient suitcase.
Specification:
Material: carbon steel
Contents:
Pressure plates with diameters of:
50mm (1.97 "), 55mm (2.17"), 59mm (2.32 "), 63.3mm (2.49"), 66.6mm (2.62 "), 70.3mm (2.77"), 71.5mm (2.81 "), 73.1mm (2.87) "), 73.4mm (2.88"), 74.8mm (2.94 "), 77.5mm (3.05"), 81.5mm (3.21 "), 83.4mm / (3.28")
Sleeves with following diameters:
Inner diameter 69.0mm (2.72 "), Outer diameter 76.0mm (2.99")
Inner diameter 77.5mm (3.05 "), Outer diameter 86.0mm (3.38")
Inner diameter 82.0mm (3.23 "), Outer diameter 91.0mm (3.58")
Inner diameter 92.5mm (3.64 "), Outer diameter 102mm (4.02")
3 extractor bolts M12 x 1.5, Overall length 110mm (4.33 ")
3 extractor bolts M14 x 1.5, Overall length 110mm (4.33 ")
Spindle diameter 22.2mm x 300mm (0.87 "x 11.81"), (including thrust bearing)
Pressure nut 32 x 60mm (1.26 "x 2.36")
Pressure sleeve diameter 38mm x 40mm (1.49 "x 1.57")
Thrust washer diameter 40mm x 3mm (1.57 "x 0.12")
Weight: 13,500 kg
Made in China
BMW N13, N18 – Engine timing tool set, 50624
BMW N13, N18 – Engine timing tool set, 50624
Features: For fixing the camshaft to TDC position for N13 and N18 1.6 petrol engines of the 2012 BMW 114i, 116i, 118i, 316i and Mini Cooper.
Contents:
1-1) 11-7-440 – For fixing the camshaft at TDC position
1-2) 11-7-440 – For fixing the camshaft at TDC position
1-3) 11-7-440 - Bolt (3 pcs.) For fixing the camshaft at TDC position
2) 496-709 - Alignment pin for fixing the crankshaft in TDC position
3) 11-9-340 - Chain tensioner: For tensioning the timing chain.
4) 119-590 - Crankshaft localization tool in GMT position
Application:
BMW 114i (2012-2015); BMW 116i (2012-2015); BMW 118i (2011-2015); BMW 316i (2012-2015)
Mini Cooper S (R56/57) (2010-2015)
Mini Coupe Cooper S (R58) (2012-2015)
Mini Roadster (R59) (2012-2015)
Mini Countryman (R60) (2012-2016)
Mini Paceman (R61) (2013-2017)
Mini Clubman (R55) (2011-2014)
Peugeot 207, 308
Citroen C3, c3 DS3 Vti, Picasso DS3, C4 VTi, C4 Picasso
Engine codes:
BMW: N13 B16A; N18 B16/M0; N18 B16A; N18 B16A/M0; N18 B16A/MO; N18B16C; N18B16C/TO; N18B16M0
Peugeot: EP3, EP6
Citroen: 8FR, 5SF
Made in China
