ENGINE TIMING TOOLS
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
BMW N47/N57 2.0, 3.0 - Chain Drive - Diesel Engine Setting/locking Kit, 50344A
Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A
Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.
Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)
Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0
OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760
Made in China
VAG 1.4 TFSI – Camshaft alignment tool set, 50427
VAG 1.4 TFSI – Camshaft alignment tool set, 50427
For a new version of their 1.4 TFSi petrol engine. This new engine is equipped with CoD technology (Cylinder on Demand) which allows the engine to switch between 2 and 4 cylinder running modes to maximize efficiency.
Applicable: VAG 1.4 TFSi petrol engines with codes CPTA, CZEA (2012-2018)
Audi A1 / Sportback, A3 Convertible / Sedan, A3 / A3 Sportback, Q2, Q3; Seat Ateca, Ibiza, Leon / ST; Skoda Kodiaq, Superb; & Volkswagen Golf VII, Passat, Polo.
Contents:
Camshaft Positioning Tool - OEM number T10504
Short pin - OEM number T10504 / 1
Long stepped pin - OEM number T10504 / 2
Crankshaft locking pin - OEM number T10340.
Made in China
2 pcs 1/2"Dr. T50 Alternator tools, 50355B
2 pcs 1/2"Dr. T50 Alternator tools, 50355B
Contents:
1/2"Dr. Torx socket bit T50x110mmL
33 teeth Ø19mm-17mm Hex Reaction corkscrew cap
Made in China
BMW N47/B47/B48 Balance shaft Alignment tool, 50342
BMW N47/B47/B48 Balance shaft Alignment tool, 50342
Purpose:
Designed to lock the balancing shafts in the correct position when repairing BMW N47, B47 and B48 engines.
Application: B47 / N47 / B48 engines in series 1, 2, 3, 4 and 5, X1, X3, X4, X5, Mini Clubman, Mini Hatch.
OEM No. 11 8 750; 2 288 054
Made in China
Renault/Nissan 1.4; 1.6; 2.0; 2.5; 3.5 – Engine timing tool set , 50259
Renault/Nissan 1.4; 1.6; 2.0; 2.5; 3.5 – Engine timing tool set , 50259
Features:
For locking the flywheel and front puller of Renault / Nissan 1.4 cars; 1.6; 2.0; 2.5; 3.5 with two cams, chain-driven petrol engines. It is also for locking the flywheel of M9R / 2.0 and M9T / 2.3 diesel engines.
Engine codes:
H4JT / 1.4
M5M / 1.6
MR4 / 2.0
2TR / 2.5
V4Y / 3.5
OEM equivalent:
МОТ 919-02
ТОТ 1431
МОТ 1716
МОТ 2019
МОТ 1789
Made in China
E22 3/4"Dr. Star impact deep socket, 46611022
E22 3/4"Dr. Star impact deep socket, 46611022
Applicable: For cylinder head bolt on MAN trucks.
Material: Cr-Mo
Produced by Force, Taiwan
VAG 02E 6-speed DSG transmission Clutch Retaining Bar, 50908
VAG 02E 6-speed DSG transmission Clutch Retaining Bar, 50908
Clutch Retaining Bar Used for asembly of multiple clutch on direct shift gearbox 02E - 6 speed
Application:
Volkswagen Beetle All 2.0T, Volkswagen Beetle GTI 2.0T Gen3, Volkswagen Beetle GTI TDI
Volkswagen Golf V All 2.0T, Volkswagen Golf VI All 2.0T, Volkswagen Golf VI All TDI
Volkswagen Jetta V All 2.0T, Volkswagen Jetta V All TDI, Volkswagen Jetta VI Sportwagen 2.0T
Volkswagen Jetta VI sedan 2.0T Gen3 GLI, Volkswagen Jetta VI sedan Facelift 2.0T Gen3 GLI
Volkswagen Jetta VI Sedan GLI, Volkswagen Jetta VI Sedan TDI
Volkswagen Jetta VI Sedan Facelift TDI, Volkswagen Jetta VI Sportwagen TDI
Volkswagen R32 MKV All 3.2
OEM No. T10303
Made in China
SUBARU 2.0; 2.5l Camshaft Alignment tool, 50501
SUBARU 2.0; 2.5l Camshaft Alignment tool, 50501
Features: Specially designed for camshaft synchronization when changing the timing belt.
SUBARU OEM No .: 499207300 (new)
Application:
SUBARU 2.5L DOHC Non-turbo engines, Impreza, Legacy, SVX.
STi 2.0L EJ20 (2002-2005)
STi 2.5L EJ25 (2005-2014)
Material: Aluminum
Made in China
2pcs Stretch belt Removal and Installation tool, 50809
2pcs Stretch belt Removal and Installation tool, 50809
Universal tool for stretch belt removal and installation.
Prevents damage to the pulley and prolongs the life of the belt
The set included two tool – one for removal and one for installation.
Made in China
Opel / Vauxhall 1.6 CDTi, 1.6 CDTi ecoFLEX Engine timing kit,50675
Opel / Vauxhall 1.6 CDTi, 1.6 CDTi ecoFLEX-Engine timing kit,50675
A comprehensive kit to lock the 1.6 diesel engine into its timed position for the removal and replacement of the timing chain to the models listed.
Included in this kit is the added component of the camshaft sprocket support bracket that is required when removing the camshaft for essential work on the Cam followers
Applications: Astra-J, Meriva-B, Mokka, Zafira-C, Tourer 2013 onwards (CDTi, EcoFlex CDTi)
Engine codes; LVL/B16DTH, LVM/B16DTL, LVL/B16DTN, LVM/B16DTC, LWQ/B16DTE, LVL/B16DTJ
Made in China
BMW B38; B48; B46 Engine timing tool set, 50665
BMW B38; B48; B46 Engine timing tool set, 50665
Engine Camshaft Timing Tool Set For BMW B38, B46, B48 & B58 Turbo 3, 4 & 6 Cylinder Engines
Features: To replace the cylinder head gasket, to disassemble and install the camshaft / camshaft torque.
Checking and synchronizing the engine.
Application: BMW B38, B46, B48
Models:
F55 / F56 Mini One First after 2014 including
F55 / F56 Mini One 2014-2018
BMW F45 / F46 216i Active Tourer / Gran Tourer after 2015 including
F55 / F56 Mini One after 2018 incl
BMW F20 / F21 116i after 2015 incl
100kW (134hp) version:
BMW F20 / F21 118i after 2015 incl
BMW F22 / F23 218i Coupe / Convertible after 2015 incl
BMW F45 / F46 218i Active Tourer / Gran Tourer after 2014 incl
BMW F30 / F31 318i after 2015 incl
BMW F48 X1 sDrive18i [11] after 2015 inclusive
F55 / F56 Mini Cooper after 2014 inclusive
F54 Mini Clubman after 2015 inclusive
F60 Mini Countryman after 2017 incl
F39 X2 sDrive18i after 2017 incl
Cooper S Clubman - R56 chassis - N18 engine after 2011 incl
Cooper S Hatchback - R55 chassis - N18 engine after 2011 incl
Cooper S convertible - chassis R57 - N18 engine after 2011 incl
BMW
F20 114i after 2012 incl
F20 116i after 2011 incl
F30 316i after 2012 incl
F20 118i after 2011 incl
F30 320i Efficient Dynamics Edition after 2012 incl
BMW number: 2360895, 116480, 2288380, 2358122, 119340, 118580, 2365488
Made in China
Hundai & Kia Flywheel Locking tool, 50371
Hundai & Kia Flywheel Locking tool, 50371
Designed to lock the flywheel through the gasoline engine starter hole 1.0 - 1.2 - 1.25 - 1.4 - 1.6 - 2.0 - 2.4 - 2.4 - 2.7 fitted in the Hyundai and Kia range. This tool ensures that the crankshaft is locked to allow the crankshaft pulley, clutch bolts and flywheel bolts to be removed and tightened without moving the crankshaft.
Models:
Hyundai:
Hyundai Accent (2011-2018)
Hyundai Elantra (2007-2018)
Hyundai Genesis Coupe (2010-2014)
Hyundai Santa Fe (2009-2018)
Hyundai Grand Santa Fe (2013-2016)
Hyundai Sonata/Sonica (2008-2010)
Hyundai Tiburon (2002-2009)
Hyundai Tucson (2015-2018)
Hyundai Veloster (2011-2018)
Hyundai H1/H300 (2010-2011)
Hyundai i10 (2008-2018)
Hyundai i20 (2009-2018)
Hyundai iX20 (2010-2018)
Hyundai i20 Coupe (2015-2017)
Hyundai i30 (2007-2018)
Hyundai iX35 (2010-2016)
Hyundai i40 (2011-2018)
Hyundai i800/iLoad (2010-2011)
Hyundai iLoad/iMax (2010-2011)
Kia:
Kia Carens (2008-2018)
Kia Ceed (2007-2018)
Kia Magentis/Optima (2009-2011)
Kia Optima (2011-2018)
Kia Picanto (2011-2018)
Kia Pro-Ceed (2008-2019)
Kia Rio (2009-2018)
Kia Sedona/Carnival (2010-2013)
Kia Cerato (2010-2018)
Kia Sorento (2010-2018)
Kia Soul (2009-2018)
Kia Sportage (2010-2019)
Kia Stonic (2017-2020)
Kia Venga (2009-2018)
Engine codes:
1.0 Petrol: G3LA, B3LA, G3LC
1.2 Petrol: G4LA, G4
1.25 Petrol: G4LA
1.4 Petrol: G4LC, G4FA, G4FA-L
1.6 Petrol: G4FC, G4FC-GL, G4FD, G4FJ
2.0 Petrol: G4KD, G4KF, G4NC, G4NA, G4ND, G4NE
2.0 Diesel: D4HA-H, D4HA-L, D4HA
2.2 Diesel: D4HB
2.4 Petrol: G4KE, G4KJ
2.7 Petrol: G6BA
OEM No. 09231-2B100
Made in China
2 pcs Alternator bit socket M10, 50355A
2 pcs Alternator bit socket M10, 50355A
1pc 1/2" Dr. Spline (XZN) socket bit M10x110mmL
1pc Reaction sorkscrew cap 33 teeth-Ø19mm-17mm hex
Aplication: VW-Audi, Skoda, Porsche, BMW, Ford, Mercedes-Benz ...
Made in China
OPEL/Vauxhall 1.6 SIDI Engine timing tool set, 50260
Engine timing tool set OPEL/Vauxhall 1.6 SIDI, 50260
Comprehensive Vauxhall / Opel 1.6 SIDI petrol engine locking kit.
The kit provides the essential tools required when replacing the camshaft drive chains and for setting the engine timing.
Contents:
Two locking pins on the gear wheel of the balancing shaft
Two pins on the chain tensioner
Tools for holding and adjusting the shaft distribution
Crankshaft Seat Belt Retaining Tool, which meets 1/2 "Dr.
Application:
Vauxhall / Opel:
Astra J (2013-2015)
Zafira C Tourer (2013-2016)
Cascade (2013-2015)
Insignia Country Tourer (2014-2016)
Insignia (2013-2016)
Engines: 1.6 SIDI Turbo, SIDI Turbo EcoFLEX
Engine codes:
A16XHT, A16SHT, B16SHT, B16SHL and B16SHT
OEM Tools: EN-51147, 51153, 50513, 51148.
Made in China
DSC Clutch Installation and removal tool- Volvo, Ford, Chrysler, Dodge, 50178
DSC Clutch Installation and removal tool- Volvo, Ford, Chrysler, Dodge, 50178
Description:
Suitable for 6 speed DCT – dual clutch transmission (getrag 6 DCT450 / MPS6) on Volvo, Ford, Chrysler, Dodge.
Applicable:
Volvo: C30, C70 (06~), S40 (04~), S60 (11~), S80 (07~), S80L, V40 (13~), V40 Cross Country, V50, V60, V70 (08~), XC60.
Ford: Focus (04~), C-Max, S-Max, Galaxy, Mondeo (07~), Kuga (13~)
Chrysler: Sebring.
Dodge: Avenger, Journey.
OEM No. 9997435 (volvo) / 308-763 (Ford)
Made in China
Audi/VW 2.0; 2.8; 3.0 - Engine timing tool set, 50077
Engine timing tool set - Audi/VW 2.0; 2.8; 3.0, 50077
Description:
For setting the engine timing when replacing the cylinder head gasket, camshaft, etc.
Suitable for Audi A6, Q5
Contents:
2x Camshaft locking tool, OEM T40133
Crankshaft locking pin, OEM T40069
Chain tensioner locking tool, OEM T40071
Crankshaft turning tool, OEM T40058
Engine applications: 2.5 FSI, 2.8 FSI, 3.0 TFSI, 3.2 FSI
Audi: A4 (2014 - 2015), A5 (2014 - 2017), A6 (2012 - 2018), A7 (2010 - 2018), A8 (2010 - 2018), S4 (2014 - 2017), S5 (2011 - 2017), Q5 (2008 - 2017), Q7 (2010 - 2018), SQ5 (2013 - 2017)
Volkswagen: Touareg 3.0 TFSI (2012 - 2017).
Porsche: Cayenne S Hybrid (2010 - 2014), Panamera (2011 - 2013)
OEM tools: T40133/1/2, T40058, T40069, T40071.
Use in accordance with OEM instructions only:
OEM1 T40133 /1 /2 | T40069 | T40071 | T40058 Audi
OEM2 T40133 /1 /2 | T40069 | T40071 | T40058 Seat
OEM3 T40133 /1 /2 | T40069 | T40071 | T40058 Skoda
OEM4 T40133 /1 /2 | T40069 | T40071 | T40058 Volkswagen
Made in China