ENGINE TIMING TOOLS
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Designed for the removal of the seized injectors from the cylinder head.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
BMW N47/N57 2.0, 3.0 - Chain Drive - Diesel Engine Setting/locking Kit, 50344A
Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A
Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.
Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)
Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0
OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760
Made in China
1/2” Dr. E20 Cylinder Head Wrench-Man, 50811
1/2” Dr. E20 Cylinder Head Wrench-Man, 50811
Features: For loosening and fastening cylinder head screws. Removing the injector no longer necessarily.
Ideally suited for commercial vehicles.
Profil: E-Torx.
Drive: Square, 1/2".
Applicable: MAN series F2000 / F90 / F8, MAN buses with D25 and D28 engines.
Made in China
24mm Oil Filter Wrench For DSG Gear Oil Change, 50845
24mm Oil Filter Wrench For DSG Gear Oil Change, 50845
Features: For operation of the oil filter housing cover when changing the oil filter insert on the DSG gearbox.
Applicable: VW and VAG group vehicles.
No removal of batteries or battery holders.
VW specification: DSG oil change within the inspection interval.
Drive: Square, 1/2".
Output: Outside 12-point profile.
Wrench size: 24mm.
Length: 199 mm.
Made in China
Mercedes-Benz OM654 - Engine Timing Tool Set, 51106
Mercedes-Benz OM654 - Engine Timing Tool Set, 51106
Applicable: A Class (from 2019), B Class (from 2019), C Class (from 2018), CLA (from 2019), CLS (from 2018), E Class (from 2016), GLB (from 2019), GLC Coupe (from 2019), GLE (from 2019), V Class (from 2019) and Vito (from 2019).
Engine codes: 1.6L 654.916 and 2.0L 654.920.
OEM No.: W654 589 00 40 00, W654 589 01 40 00 and W654 589 00 21 00.
Made in China
10 pcs Motorcycle Flywheel Puller Set, 60023
10 pcs Motorcycle Flywheel Puller Set, 60023
A set of flywheel pullers used for separating the flywheel from the crankshaft taper.
Contents:
5 double ended pullers with sizes:
M28 x M26 (1.0 mm thread),
M25 (1.25 mm) x M22 (1.0 mm),
M27 x M24 (LH) (1.0 mm),
M26 x M22 (1.5 mm),
M27 (1.25 mm) x M20 (1.0 mm)
2 single ended puller:
M28 x 1.5 mm,
M19 x 1.0 mm
Threaded bolts: M14 x 1.5 mm, M16 x 1.5 mm, M18 x 1.5 mm
Made in China
Ford 2.0 EcoBlue TDCi - Crankshaft Pulley Puller, 51118
Ford 2.0 EcoBlue TDCi - Crankshaft Pulley Puller, 51118
Designed to remove the crankshaft pulley when accessing to the timing belt.
Suitable for Ford 2.0 EcoBlue TDCi diesel engines from 2016.
Applications: Ford Edge, Focus, Focus Active, Galaxy, Kuga, Mondeo, S-MAX, Transit, Transit Custom, Tourneo Custom.
Engine codes: BCCA, BCCB, BCCC, YLCA, YLCB, YLCC, YLDA, YLDC, YLF6, YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMF6, YMFA, YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6, YNRA.
OEM#: 204-158-01, 205-295
Made in China
Glow Plug Electrode Removal Tool Set M8 / M10, 51031
Glow Plug Electrode Removal Tool Set M8 / M10, 51031
Features: Designed for removing broken glow plug electrodes.
Suitable for glow plug M8x1.0, M10x1.0, M10x1.25.
Contains:
2 pcs Tap: M3x0.5, M4x0.7
2 pcs Drill: 2.5x120mm, 3.3x140mm
2 pcs Thread Rod: M4x0.7x175mm
1 pcs Thread Rod: M3x0.5x175mm
3 pcs Extraction Nut
3 pcs Extraction Adaptor: M8x1.0, M10x1.0, M10x1.25
3 pcs Guide bolt: M8x1
3 pcs Guide bolt: M10x1.0
3 pcs Guide bolt: M10x1.25
Made in China
VAG DSG 0AM - Assembly Lever and Guide Pins, 50796
VAG DSG 0AM - Assembly Lever and Guide Pins, 50796
Features: Used to operate the engaging lever when removing and installing the mechatronic unit on 7-speed dual clutch gearbox DSG 0AM.
The guide pins ensure straight mounting of the mechatronic unit.
Applications:
Audi: A1 (2010-2018), A3 (2003-2012), TT (2006-2015)
Seat: Altea (2004-2015), Ibiza (2008-2017), Leon (2005-2012), Toledo (2004-2009)
Skoda: Fabia (2007-2014), Octavia (2004-2013), Rapid (2012-2020), Roomster (2006-2015), Superb (2008-2015), Yeti (2009-2017)
Volkswagen: Caddy (2004-2020), Golf Plus (2005-2014), Golf V (2003-2009), Golf VI (2008-2012), Jetta III (2005-2011), Jetta IV (2011-), New Beetle (2011-2019), Passat (2005-2010), Passat (2010-2014), Polo (2009-2017), Scirocco (2008-2014), Touran (2003-2010), Touran (2010-2015)
OEM#: T10407, T10406
Made in China
Mercedes-Benz Ignition Lock Removal Tool, 50765
Mercedes-Benz Ignition Lock Removal Tool, 50765
Features: Designed to remove and replace ignition switch trim ring.
Applicable: Mercedes-Benz W129, W140, W202, W210, W220, W203, W209, W211, W204
Made in China
Diesel injector sealing ring puller, 50566
Diesel injector sealing ring puller, 50566
Features: Slide hammer action easily removes diesel injector copper ring seals
Tapered point screws into the seal, locking it to the tool
Hammer action extracts the copper ring seal even when there is carbon build up
Extracts the sealing rings from between the injector nozzle & the cylinder head without damaging the injector recess or head.
It's designed to remove of sealing rings with internal diameter 4 to 16 mm
Applicable: Ideal for Mercedes & many other diesel engines that use copper injector ring seals
Made in China
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Designed for the removal of the seized injectors from the cylinder head.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
1/2"Dr. 22mm Oxygen Sensor Socket, 51082
1/2"Dr. 22mm Oxygen Sensor Socket, 51082
Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 22mm
Made in China
1/2"Dr. 19mm Oxygen Sensor Socket, 51081
1/2"Dr. 19mm Oxygen Sensor Socket, 51081
Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 19mm
Made in China
1/2"Dr. 17mm Oxygen Sensor Socket, 51080
1/2"Dr. 17mm Oxygen Sensor Socket, 51080
Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 17mm
Made in China
BMW Drive Shaft and Differential Flange Nut Tool Set, 51019
BMW Drive Shaft and Differential Flange Nut Tool Set, 51019
Features:
For removing and installing of the drive shaft nut allows inserting of the rear differential pinon seal suitable for BMW vehicles with rear and four wheel drive.
Suitable for BMW E70, E90, E91, E92 with N54 B30 engine.
Contents:
Open end spanner 50 mm - OEM # 33 5 040 – For BMW E70, E88, E90, E91, E92
Flange holding tool - OEM# 23 0 020 – For BMW E70, E82, E88, E90, E91, E92, etc.
Multi-point ring spanner 65 mm – OEM# 33 5 050 – For BMW E70, E82, E90, E91, E92, E93
Multi-point socket 34T – OEM# 3 35 060 – For BMW E70, E82, E90, E91, E92, E93
Seal ring drift – OEM# 3 35 080 - For BMW differential: HAG 215 Sp, HAG 220kom, HAG 225kom, HAG type G
OEM#: 33 5 040, 33 5 050, 33 5 060, 33 5 080, 23 0 020
Made in China
HGV Diesel Injection Nozzle Socket, 50825
HGV Diesel Injection Nozzle Socket, 50825
Features:
Used to install and remove the diesel injection nozzle on MAN, Mercedes-Benz and Scania commercial vehicles.
Specially designed with window, toothed end and M14x1.5 pulling force screw.
Applicable: Mercedes-Benz CRD, MAN & Scania
Made in China