UNDER CAR TOOLS

M14x2.0 Spindle for Press and Pull Sleeve Kit, 50093-3

Pulling spindle with nuts and thrust bearings.

Size: M14x2.0 mm

Length: 450 mm

Material: carbon steel

Made in China

M12x2.0 Spindle for Press and Pull Sleeve Kit, 50093-2

Pulling spindle with nuts and thrust bearings.

Size: M12x2.0 mm

Length: 450 mm

Material: carbon steel

Made in China

M10x1.5 Spindle for Press and Pull Sleeve Kit, 50093-1

Pulling spindle with nuts and thrust bearings.

Size: M10x1.5 mm

Length: 450 mm

Material: carbon steel

Made in China

M18x1.5 Spindle for Press and Pull Sleeve Kit, 50092-5

Pulling spindle with nuts and thrust bearings.

Size: M18x1.5 mm

Length: 350 mm

Material: carbon steel

Made in China

M160x1.5 Spindle for Press and Pull Sleeve Kit, 50092-4

Pulling spindle with nuts and thrust bearings.

Size: M16x1.5 mm

Length: 350 mm

Material: carbon steel

Made in China

M14x1.5 Spindle for Press and Pull Sleeve Kit, 50092-3

Pulling spindle with nuts and thrust bearings.

Size: M14x1.5 mm

Length: 350 mm

Material: carbon steel

Made in China

M12x1.5 Spindle for Press and Pull Sleeve Kit, 50092-2

Pulling spindle with nuts and thrust bearings.

Size: M12x1.5 mm

Length: 350 mm

Material: carbon steel

Made in China

M10x1.5 Spindle for Press and Pull Sleeve Kit, 50092-1

Pulling spindle with nuts and thrust bearings.

Size: M10x1.5 mm

Length: 350 mm

Material: carbon steel

Made in China

28 pcs Press and sleeve master kit, 50605

Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmerrings, ect.

Universal use for automobile, truck, municipally, country and forestery technology, ect.

Contents:
4 x step discs
4 x pulling spindle and nuts
8 x thrust bolts M10, M12, M14, M16,
20 x pressure sleeves:
Ø 44x34 mm; Ø 46x36 mm; Ø 48x38 mm;
Ø 50x40 mm; Ø 52x42 mm; Ø 54x44 mm; Ø 56x46 mm; Ø 58x48 mm
Ø 60x50 mm; Ø 62x52 mm; Ø 64x54 mm; Ø 66x56 mm; Ø 68x58 mm
Ø 70x60 mm; Ø 72x62 mm; Ø 74x64 mm; Ø 76x66 mm; Ø 78x68 mm;
Ø 80x70 mm; Ø 82x72 mm

Made in China

16 Pcs Bearing extractor set with slidding hammer, 50148

For removal of Pilot Bushes Bearings etc.
Form blind housings.
One Slide hammer assemble 2.5 jaws.
Made of ultra strong Cr-Mo material
For proffesional use.
Specification:
Thread: M10×1.5; M10×1.5 to M8×1.25, M10×1.5 to M6×1.0
Collects size: 6-13mm; 10-17mm; 15.5-22mm; 22-29mm; 28.5-35mm; 35.5-39mm; 38.5-45mm; 42.5-49mm; 48.5-55mm; 52.5-59mm
Contents:
1x Sliding Hammer Assy
1x 2 Claw Puller Assy
3x Screw Adaptors
10 X Collects
1 X Counter Stay Puller

Made in China

17 Pcs Bearing and Seal Driver Set, 50147

Features:
It is only suitable for small bearings with a light press fit. e.g. bicycle wheels, alternator, washing machine, electric motors etc.
The tool is Not An Extractor, just an installer. For bearing removal needed another tool .
This comprehensive set allows the user to insert wheel bearing race and seals easier without damaging the race and axle housing.
Fits most standard bushing/wheel bearings.
Simply turn discs over to drive seals.
Material: Aluminium
Set includes the following sizes (small end diameter x large end diameter):
10mm x 12mm; 12mm x 14mm; 14mm x 16mm; 15mm x 17mm; 16mm x 18mm; 18mm x 20mm; 20mm x 22mm; 22mm x 24mm; 25mm x 27mm; 28mm x 30mm; 30mm x 34mm; 32mm x 36mm; 35mm x 40mm; 38mm x 42mm

Made in China

2 pcs Coil Spring Compressor for MacPherson, 50886

Features:

Compresses the coil spring to replace the shock absorber unit or spring.

Made of 40Cr steel.

Forged construction threaded rod with built-in detention pins to help lock the coil in place.

Overall size: 300 mm

Made in China

Ear-Type CV Joint Boot Clamp Pliers, 50783

For ear type clamps, fits late model GM CV joint boots, also installs PERMA-QUICK type clamps quickly and easily use for filter, cooling system and vacuum lines.
Applicable: VW, Audi, Vauxhall, BMW, Mercedes Benz, Honda, Nissan and Mazda.

Made in China

Code: 50180

Pneumatic CV Joint Boot Inastallation tool, 50425

It is used for mounting elastic CV boots without removing drive shafts from the vehicle or the CV joint from the drive shaft.
Used with air compressor.
Suitable for rubber bellows. The tool is not suitable for PVC boots.
 Diameter of the boot: 20 - 110 mm
Material: Aluminum steel
Maximum pressure: 8 Bar (116 Psi)
Air Inlet: 1/4 "

Made in China

2 pcs Heavy Duty Spring coil compressor kit, 50168

Features adjustable safety bar for additional security and compressors have lower safety jaws for ultimate peace of mind.
Hook engage spring can be compressed by turning hex nut.
Maximum capacity per pair: 1200kg.
Use with 19mm hex socket or wrench. 
Jaws capacity: 23mm-280mm.
Length 280mm.
Made of durable material for added strength.

Made in China