UNDER CAR TOOLS

30mm Ball Joint Separator Tie Rod End Removal Puller, 50792

Used to dismount steering and suspension ball joints.
Applicable: Mazda 6, Audi, Mercedes-Benz ect.
Jaw opening: 30 mm.

Made in China

32mm Universal ball joint separator, 50050

This tool is used to separate the ball joint from the spindle support arm
Jaw size: 32 mm
Max Jaw opening: 85mm

Made in China

20 mm Universal ball joint separator, 50032

This tool is used to separate the ball joint from the spindle support arm
Applicable:  Audi, BMW, Ford, Honda, Mercedes-Benz, Nissan, Opel, Renault, Seat, Skoda, Toyota, Volkswagen and Volvo.
Adjustable for Different Size Ball Joints
Jaw open: 20mm
1-1/8" & 2-1/8" (30 - 56 mm) Maximum Opening Capacity
Bolt size: M16
Use with 19mm wrench

Made in China

VW & AUDI Strut nut socket, 50419

Features:
Suitable for the disassemble and installation of top shock retaining nut.
Used with 22mm spanner wrench.
Material: Heat treated and tempered chrome molybdenum steel (CR-MO)
Overall Length: 44mm
Applications: Most Audi & VW front wheel drive vehicles.

Made in China

Wheel bearing tools – 85 mm, 50432A

The hub bearing removal and installation kit with integrated flange serves for a seamless and quick replacement of the damaged generation bearing - 2 - 85 mm on all Volkswagen vehicles (Touareg & T5 with 16 ”wheels/ suspension, Transporter, Multivan). The convenience of this kit is that it can be used in a situation without having to remove the hub damper from the car. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Feature:
All tools in the kit are heat treated for strength and durability.
With this tool kit you can easily remove the bearings and other components.
These bearings are lightweight with a built-in flange.
They are also preloaded with a retaining bracelet that secures the bearing to the hub housing.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.

https://www.youtube.com/watch?v=pequSdvAJU0&feature=youtu.be

Contents:
5 Push pins
1 Pressure plate with 5 holes
1 Pair of half shells for dismantling
1 Pair of half shells for installation
1 Dismantling plate
1 Installation plate
L Type lever

Front wheel bearing tools – 72 mm, 50432

This wheel hub bearing tools kit is ideal for the damage-free fitting and disassembling  of generation-2 bearings units on all common vehicles for Audi, Seat, Skoda and for Volkswagen vehicles. The convenience of this kit is that it can be used in a situation without the need to dismantle the shock absorber with the hub from the vehicle. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Characteristics:
All the tools in the kit are heat-treated for strength and durability.
With this tool kit, you can easily remove bearings and other components.
These bearings are lightweight with a built-in mounting flange.
They are also preloaded with a retaining brace that fixes the bearing in the hub body.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.
Contents:
1 pcs Pair of half shells for dismantling (72 mm)
1 pcs Pair of half shells for installation (72 mm)
2 pairs Screws to fix the half shells
1 pcs  Dismantling plate
1 pcs Installation plate
2 pairs 5 x Bolts (72 mm - 76 mm in length , 8,1 and 11,9 mm in Diameter)
1 pcs Screw M 20 x 2,0 with nut hex drive 22 mm
1 pcs High strength ball bearing fitted spindle, 30mm drive
1 pcs Pressure plate with 8 holes, 72mm,  (122 mm in diameter, 18 mm in width)
Applicable:
For Audi A1 ( from year 2011)
For Audi A2 ( built after 2000)
For Seat Ibiza ( from 2002 )
For Skoda Fabia ( manufactured since 2000 )
For VW Fox ( from 2005 )
For VW Polo ( from 2002 )

Ball Joint Remover / Installer for BMW 3 Series, 50040

The kit is suitable for disassembling and mounting the BMW 3 series supporting joints.
Allows the joint to be dismantled without removing the hanger arms.
The tools are made of high quality steel.
Thanks to the replaceable piston elements, the tool can be used more widely for other car models as well as for hydraulic and plastic bushings and bearings.

The set is in blue case.

Labor Saving wrench, 50216

Labor Saving wrench adopt the highly effective and variable speed as a main drive, which function is small volume, light weight, Due to the big variable ratio, the less input power will come into being more output wrest distance, The product select high-grade alloy steel and the superior craft of heart treatment, firm and durable, high effective and saving, the appearance of using spray polishing, and have a good feeling. This products are used in kind of heavy-duty truck tire widely, and it is the necessary tool of auto repairman and the handy tool driver friends.

The biggest security output torque - 3800N.M.
Total length: 310 mm
Torque: 3800 Nm
Gear rate: 1:58
Impact socket: 32 mm; 33 mm

Made in China

Heavy duty CVboot clamps plier for driveshaft, 50111

Application: To install of new stainless steel clamp-bands on drive-shafts where torque setting is required.
Material: Cr-Mo, chrome plated
Length: 270 mm
Maximum opening size of the jaw: 42 mm
Torque: 23-30 Nm
Suitable for VW, Audi, Seat, Skoda, Opel / Vauxhall and Ford.

Made in China

Draper Bearing, Seal and Bush Insertion/Extraction Kit (26 piece), 50092A

Expert Quality, bearing, seal and bush insertion and extraction kit, perfectly designed to aid with accurate and controlled insertion or removal of a host of different bearings, including normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc.
Each kit comprises of 22 adaptor rings and five fine thread puller bars with hex. nut ends, contents of each kit is the following:

1 x 34mm x 44mm adaptor ring, 1 x 36mm x 46mm adaptor ring, 1 x 38mm x 48mm adaptor ring, 1 x 40mm x 50mm adaptor ring, 1 x 42mm x 52mm adaptor ring, 1 x 44mm x 54mm adaptor ring, 1 x 46mm x 56mm adaptor ring, 1 x 48mm x 58mm adaptor ring, 1 x 50mm x 60mm adaptor ring, 1 x 52mm x 62mm adaptor ring, 1 x 54mm x 64mm adaptor ring, 1 x 56mm x 66mm adaptor ring, 1 x 58mm x 68mm adaptor ring, 1 x 60mm x 70mm adaptor ring, 1 x 62mm x 72mm adaptor ring, 1 x 64mm x 74mm adaptor ring, 1 x 66mm x 76mm adaptor ring, 1 x 68mm x 78mm adaptor ring, 1 x 70mm x 80mm adaptor ring, 1 x 72mm x 82mm adaptor ring, 1 x 75mm x 85mm adaptor ring, 1 x 80mm x 90mm adaptor ring, 1 x M10 pulling spindle, 1 x M12 pulling spindle, 1 x M14 pulling spindle, 1 x M16 pulling spindle.

Made in China

Draper Bearing, Seal and Bush Insertion/Extraction Kit (27 piece), 50092

Expert Quality, bearing, seal and bush insertion and extraction kit, perfectly designed to aid with accurate and controlled insertion or removal of a host of different bearings, including normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc.
Each kit comprises of 22 adaptor rings and five fine thread puller bars with hex. nut ends, contents of each kit is the following:

1 x 34mm x 44mm adaptor ring, 1 x 36mm x 46mm adaptor ring, 1 x 38mm x 48mm adaptor ring, 1 x 40mm x 50mm adaptor ring, 1 x 42mm x 52mm adaptor ring, 1 x 44mm x 54mm adaptor ring, 1 x 46mm x 56mm adaptor ring, 1 x 48mm x 58mm adaptor ring, 1 x 50mm x 60mm adaptor ring, 1 x 52mm x 62mm adaptor ring, 1 x 54mm x 64mm adaptor ring, 1 x 56mm x 66mm adaptor ring, 1 x 58mm x 68mm adaptor ring, 1 x 60mm x 70mm adaptor ring, 1 x 62mm x 72mm adaptor ring, 1 x 64mm x 74mm adaptor ring, 1 x 66mm x 76mm adaptor ring, 1 x 68mm x 78mm adaptor ring, 1 x 70mm x 80mm adaptor ring, 1 x 72mm x 82mm adaptor ring, 1 x 75mm x 85mm adaptor ring, 1 x 80mm x 90mm adaptor ring, 1 x M10 pulling spindle, 1 x M12 pulling spindle, 1 x M14 pulling spindle, 1 x M16 pulling spindle, 1 x M18 pulling spindle.

The set is in case.

Made in China

Universal ball joint puller, automobile, 23 mm, 50049

Specification:
External clamping width: 23 mm
Clamping depth: 65 mm
Width: 100 mm
Spindle length: 35 mm
Thread dimension: M14 x 1.5
Width across flats: 19 mm

Applicable:
For easy ejection of ball joint bolts, particularly for many cars from the following manufacturers: Audi, BMW, Fiat, Ford, Daimler-Chrysler, Opel/Vauxhall, Nissan, Toyota, VW, Volvo.

Spring compressor for Mercedes, 50073

Drop forged yokes head threated
Telescopic construction with 3-point safety interlock and automatic freeheelat and of stroke.
Maximum compression range 325 mm.
Minimum compression range 120 mm.

Applicable for:

Mercedes: W123, W124, W129, W201, W202, W210

Mercedes: W114, W115, W116, W123, W124, W126, W129, W140, W201, W202, W203, W210.

Other models: GM, Peugeot, Rover, Hyundai, Saab, Volvo, Volkswagen, Fiat, Mazda, Toyota, Nissan, Mitsubishi.

The set is in blue case.

Made in China

11 pcs Bearing and seal driver set, 50130
For the installation of bearings and seals. Helps avoid damage to bearing and seal faces.
This set will provide the correct size driver for 99%, bearings, bush and oil seal installations.
The reverse side of the collar can also be used to drive seals.
Supplied with a strong blow mould case.
Ideal for car, commercial motorbike or any application that has bearings or seals.
Always drive that bearing in square and flush first time.

CV Joint Assembly Removal Tool, 50044

Description:
- For removing CV joints on front wheel drive cars without removing the drive shaft
- Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip
- A robust tool for front wheel drive cars
- Suitable for most vehicle
- Removes CV joints without removing drive shaft
- Time saver
- Essential service tool
- Phosphate Coated for long heavy duty service life