UNDER CAR TOOLS
14 pcs Special vibro chisel set, 846-5047
14 pcs Special vibro chisel set, 846-5047
A : 74 mm Large Flat Hammer.
B : 63 mm Large Concave Hammer.
C : 38 mm Medium Flat Hammer.
D : 1/2" Dr. Adaptor Hammer.
E : Adaptor Shaft Hammer.
F : 25 mm Hammer.
G : Track Rod Hammer.
H : 7" x 24 mm Impact ball joint separator
I : 7"x 20 mm Impact ball joint separator
J : 20 mm Flat Chisel
K : Point Chisel.
L : 38.5 mm Diameter Body Smoother Hammer.
M : 10 pcs Spare O-Rings
N : Air Hammer
Tools material: Cr-Mo
Made in Taiwan
1/2”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037А
1/2”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037А
Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axle.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm
• H: 32 mm
Made in Taiwan
3/4”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037B
3/4”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037B
Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axles.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm.
• H: 60 mm
Made in Taiwan
VW & AUDI Strut nut socket, 210-0155-AT
VW & AUDI Strut nut socket, 210-0155-AT
Features:
Suitable for the disassemble and installation of top shock retaining nut.
Used with 22mm spanner wrench.
Material: Heat treated and tempered chrome molybdenum steel (CR-MO)
Overall Length: 44mm
Applications: Most Audi & VW front wheel drive vehicles.
Made in Taiwan
51 mm Lower ball joint socket for Peugeot/Citroen, 210-0215-51
51 mm Lower ball joint socket for Peugeot/Citroen, 210-0215-51
Features:
Suitable for removal of OEM and aftermarketlower ball joints on Peugeot and Citroen.
Profile: 51 mm x 35 mm
Length: 45 mm
Made in Taiwan
Lower ball joint socket for Peugeot/Citroen, 210-0215-60
Lower ball joint socket for Peugeot/Citroen, 210-0215-60
Features:
Suitable for removal of OEM and after market lower ball joints on Peugeot and Citroen.
Profile: 60mm x 38 mm
Length: 45 mm
Made in Taiwan
Coil spring compressor 5/8" - 10 Square thread, 741-0107A
Coil spring compressor 5/8" - 10 Square thread, 741-0107A
Tempered Chrome-molybdenum steel jaws with ACME threaded lead screw quickly & safely compress coil springs on all passenger cars & pick up trucks.
Size: 300 mm
Made in Taiwan
Coil spring compressor 5/8" - 11 UNC, 741-0107
Coil spring compressor 5/8" - 11 UNC, 741-0107
Tempered Chrome-molybdenum steel jaws with ACME threaded lead screw quickly & safely compress coil springs on all passenger cars & pick up trucks.
Lenght: 300 mm
Made in Taiwan
Universal ball joint separator 22 mm, 211-0163
Universal ball joint separator 22 mm, 211-0163
This tool is used to separate the ball joint from the spindle support arm
Applicable: Audi, BMW, Ford, Honda, Mercedes-Benz, Nissan, Opel, Renault, Seat, Skoda, Toyota, Volkswagen and Volvo.
Adjustable for Different Size Ball Joints
1-1/8" & 2-1/8" (30 - 56 mm) Maximum Opening Capacity
Lifetime limited warranty