UNDER CAR TOOLS

Spring compressor for Mercedes, 50073

Drop forged yokes head threated
Telescopic construction with 3-point safety interlock and automatic freeheelat and of stroke.
Maximum compression range 325 mm.
Minimum compression range 120 mm.

Applicable for:

Mercedes: W123, W124, W129, W201, W202, W210

Mercedes: W114, W115, W116, W123, W124, W126, W129, W140, W201, W202, W203, W210.

Other models: GM, Peugeot, Rover, Hyundai, Saab, Volvo, Volkswagen, Fiat, Mazda, Toyota, Nissan, Mitsubishi.

The set is in blue case.

Made in China

11 pcs Bearing and seal driver set, 50130
For the installation of bearings and seals. Helps avoid damage to bearing and seal faces.
This set will provide the correct size driver for 99%, bearings, bush and oil seal installations.
The reverse side of the collar can also be used to drive seals.
Supplied with a strong blow mould case.
Ideal for car, commercial motorbike or any application that has bearings or seals.
Always drive that bearing in square and flush first time.

Outer Tie Rod Remover 62814

• Two adjustable jaws special designed for removing most models of outer tie rod
• Material: SCM420 Hardened 42°
• Handles up to 5 tons of knuckle twisting force
• Jaw reach is 2-1/4" (57 mm) with a spread of 2-1/2" (64 mm)
• Jaws, once tightened, won't slip on the knuckle
• Can be used to separate lower ball joints on import FWD vehicles

Made in Force, Taiwan

CV Joint Assembly Removal Tool, 50044

Description:
- For removing CV joints on front wheel drive cars without removing the drive shaft
- Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip
- A robust tool for front wheel drive cars
- Suitable for most vehicle
- Removes CV joints without removing drive shaft
- Time saver
- Essential service tool
- Phosphate Coated for long heavy duty service life

CV Joint clamp banding tool, 50690
Use to install and tighten the "band-it" or strap style clamps on CV joint boots or on power steering rack and pinion steering gear boots.
Once installed into the tool tighten the band by turning the handle on the tool;
Use a socket or wrench on the handle to torque the band to OE specifications.
When the boot clamp has been tightened to specs cut the band to the correct length by flipping the lever (at the front of the tool) forward.
Features:
CV joint boot clamp wrench securely fastens band-it style free-end clamps
Roll band clips and pre-formed CV boot clamps
Use by turning the winding mandrel with a 1/2-inch socket or wrench
Measures 11-1/2 inches long
Works on All CV Boot Clamps, ATV,  UTV and some automotive applications.

Strut spring compressor, 370 mm, 50078B
Professional tool for commercial or occasional use.
High quality set of compressors for working on struts on passenger cars and light comercials.
This listing is for one pair.
Suitable for use where there is limited space under the wheel arches.
1/2" square drive or 21mm spanner.
Extra long set will compress up to 370mm.
Twin hook design for stability.

Made in China

Universal Strut Coil Clamp Spring Compressor Tool Set, 50074
The spring tensioner is very suitable for mounting and dismounting of the McPherson springs at the front and rear axles of many vehicle types:
BMW, Toyota, Ford, Opel, VW, Audi, Saab, Nissan, Honda, Subaru, Volvo, Mitsubishi etc.
Contents:
1 x Heavy Duty Compressor(5.2kg)
2 x 65-125mm Jaws (Use rang: 80-115mm)
2 x 88-160mm Jaws (Use rang: 110-150mm)
2 x 127-214mm Jaws (Use rang: 140-195mm)
Adjustment Block

The set is in blue case.

Heavy duty CV boot band pliers, 62527

Ball Joint assembly and disassembly tool for Mercedes

Specifically designed for Mercedes-Benz (W220, W211, W230).
This tool removes and installs the lower ball joints whilst insitu without removing parts, saving time and money.
High quality forged C clamp is manufactured from CR-MO.
Tools are labelled for extraction and installation. Heavy duty type.
Contents:
- 160 mm compression spindle with 24 mm hex drive
- 2 compression heads 40 mm and 54 mm
- 3 pressure pads 22 mm, 33 mm and 57 mm

4-In-1 Master Ball Joint Remover/Installer Kit Ideal For 4wd Ball Joint Service/Repair Heavy Duty Tools Suitable for Home or Business Applications

Ideal For 4wd Ball Joint Service/Repair
Heavy Duty Tools
Suitable for Home or Business Applications
Contents:
1 "C" Frame Press
1 "C" Frame Screw
3 Receiving Tubes Sizes:
2-3/4" X 3"
2-1/4" X 2-1/2"
1-3/4" X 2"
Installer And Remover Adapters For 1967 Thru Current 1/2 And 3/4 Ton 4WD Vehicles With DANA 44 Front Axle Found In FORD, GM, DODGE, IHC & JEEP vehicles
Excellent For Removal And Installation Of Press-Fit Parts Such As Ball Joints
Universal Joints And Truck Brake Anchor Pins
It Will Also Remove Rusted And Corroded Parts...

5 pcs Inner bearing puller set HS0026

Coil spring compressor , 62701

Front axle upper ball joint extractor installer VW T4, 50463

Suitable for removing and installing the upper front ball joint in situation without the need to disassemble.
Features a variety of adaptors used in different combinations for extracting and installing.

Applicable: VW; T4 2000 CC, T4 2500 CC

Made in China