AUTOMOTIVE SPECIALTY TOOLS

Fiat  1.4 12V - Engine Timing Tools, 50529

Designed specifically to allow the cam and crankshaft to be aligned when setting the engine timing on the 1.4L 12 valve petrol engines found across the Fiat and Lancia ranges from 1995 to 2000.
Designed specifically for the 1.4 12v engine.
Application:
Models:
Fiat 1.4 12v engine, Fiat Brava, Brao, Marea Weekend(95-00)
Lancia Ypsilon
Engine code: 1.4 12v - 182 A3.000, 182 A5.000
Contents:
Camshaft locking tool (OEM Ref 1 860 899 000)
Crankshaft timing tool (OEM Ref 1 860 901 000)
NOTE: The Camshaft locking tool will only fit the OEM camshaft found in the engines codes listed.

Made in China

Alfa Romeo Twin Spark Twin Cam Belt Drive - Petrol Engine Setting/Locking Kit, 50327

For 1.4, 1.6, 1.8, 2.0 16v Twin Cam - Belt Drive
Contents:
Camshaft setting plates for locking the camshafts in the timed position. The plates are positioned in place of the camshaft bearing caps.
Timing and balance shaft belt tensioner adjusters.
Applicable:
Alfa Romeo Twin Spark:
1.4/1.6 Engines - 145/146/155/156 (96-01)
1.8 Engines - 145/146, (96-01), 155/156 (96-06),
Spider/GTV (98-01):
2.0 Engines - 145/146 (96-01), 147 (01-07), 155/156 (95-02), 166 (98-01)
Spider/GTV (96-03)
1.4/1.6 Engines - 145/146/155/156 (96-01),
1.8 Engines - 145/146, (96-01), 155/156 (96-06), Spider/GTV (98-01),
2.0 Engines - E145/146 (96-01), 147 01-07, 155/156 (95-02), 166 (98-01),
Spider/GTV (96-03)
Plate Applications:
Purple; 1.4, 1.6, Blue; 1.8, 2.0
OEM №: 1825041000, 1825042000, 1822154000, 1822149000
Engine code:
162.01, 321.04, 322.01, 322.05, 323.01, 323.10, 335.03, 372.03, 671.06, 672.04, 676.01

Made in China

Fiat Alfa Romeo Lancia 0.9 Twin Air Chain Drive - Engine Timing Tool Set , 50294

Designed to lock the cam and crankshaft in position to allow the removal and replacement of the timing chain fitted to the new low emission and high economy twin cylinder Fiat engine.
Note: Fiat state that after rebuild these engines should be placed on suitable electronic diagnostic software for the onboard electronic control systems to be reset.

Content:
Pulley Locking Pin
Flywheel Locking Pin
Camshaft Locking Plate
Balancing shaft adjustment tool
Applicable:
Alfa Romeo:MiTo（2012-2015）
Fiat: 500/500C（2010~), Panda（2012~), Punto（2012~)
Lancia: Ypsilon(2011~)
Engine code: 0.9 Twin Air Turbo: 312A2.000

OEM №: 2.000.035.300; 2.000.035.200; 2.000.035.100; 2.000.038.300

Made in China

Timing tool set for FIAT 2.2; 2.3; 3.0 JTD and 22DT PSA engines, 50601
Used for belt timing as well as chain-driven engines, including later versions, for light commercial vehicles with 2.2; 2.3; 3.0 and PSA engines.
The set contents a water sensor installation socket, crankshaft turning tool, timing cover centring plate, oil pump setting plate as well as camshaft and crankshaft locking tools.
These engines are also found in the Ford Transit.
OEM Tools No:
Fiat / Iveco: 1.860.617.000/99360608, 2.000.016.500/99360614, 2.000.018.200/99360615
Citroen / Peugeot: 0191 / 2A, 0191 / 2B, 0198A, 0198B2, 0198D, 0198G
Ford: 303-698, 303-705 / 21-256
Applicable:
Citroen: Relay/Jumper III (06-12)
Fiat: Ducato (02-13)
Iveco: Daily (03-10), Daily/EcoDaily (09-11)
Пежо: Boxer III (06-12)
Also suitable for PSA engines:
  - Puma 22DT 4HV 100PS
  - Puma 22DT 4HV 120PS
  - F30DT
Engine code:
Citroen / Peugeot:
2.2D Hdi: 4HM, 4HM, 4HV
Fiat:
2.2D Multijet 100: 4HV
2.3D JTD: F1AE0481C
2.3D Multijet: F1AE0481D, F1AE0481N, F1AE3481E
3.0D Multijet: F1CE0481D, F1CE3481E, FCE13481M, F1CE3481N
Iveco:
2.3D: F1AE0481A, F1AE0481G, F1AE0481GA, F1AE0481H, F1AE0481HA, F1AE0481R, F1AE0481RA, F1AE0481UA, F1AE0481VA
3.0D: F1CE0481A, F1CE0481B, F1CE0481F, F1CE0481H

Made in China

Engine Timing Kit Fiat/ Alfa Romeo 1.4L, 50481

Features: To lock the camshaft and crankshaft in position to allow the removal and replacement of the timing belt fitted to the new generation 1.4 Fiat MultiAir engines.
Applicable:
Alfa Romeo:
MiTo    1.4 (105)               Engine code: 955A6.000
MiTo    1.4 (135)               Engine code: 955A2.000
Giulietta   1.4 (170)            Engine code: 940A2.000
Fiat:
Punto EVO   1.4 (105)      Engine code: 955A6.000
Punto EVO   1.4 (135)      Engine code: 955A2.000
Lancia:
Delta1.4                            Engine code: 955A7.000

OEM Tools No.: 2 000 035 100; 2 000 035 300; 2 00 035 200

Made in China

Diesel engine setting/locking kit 2.3D JTD; 3.0D JTD; 3.0D Hdi, 50674
Suitable for adjustment and engagement of the Fiat 2.3D JTD diesel engine, the Fiat 3.0D JTD diesel engine and the Citroen / Peugeot 3.0D Hdi diesel engine (Chain Drive).
The set includes camshaft adjustment pins, crankshaft locking bolts and a locking sensor.

Application:

Citroen: Relay / Jumper III (06-12)

Fiat: Ducato (02-11)

Iveco: Daily (03-10); Daily / Eco Daily (09-11)

Peugeot: Boxer III (06-12)

Engine codes:

2.3D: F1AE0418A, F1AE0481B, F1AE0481C, F1AE0418D, F1AE0481F, F1AE0481FA, F1AE0481G, F1AE0481H, F1AE0481HA, F1AE0481N, F1AE0481UA, F1AE0481VA
3.0D : F1CE0481A, F1CE0481B, F1CE0481D, F1CE0481F, F1CE0481H, F1CE3481M
3.0HDi :    F30DTE; (F1CE0481D), (F1CE3481DM), (F1CE3481N)

OEM No. OEM Tools: 99360614/(-).0191/2.B, 99360615/2.000.018.200/(-).191/2.A, 99360608/1.860.617.000 

Made in China

3 pcs Glow plug removal socket tool set Fiat, Alfa, Lancia, 50680

Special design to reach the glow plugs when the cable restricts their access.
These sockets have a lateral slot to go round the cable attached to the glow plug
Sizes: 8 mm, 9 mm, 10 mm
Length: 50 mm
Material: CR-V
Application: Alfa Romeo 147/156/159 / GT / Spider / Brera / Fiat Bravo / Stilo / GM Astra / Signum / Vectra-C / Zafira / Saab 93/95 as well as some PSA models

Citroen/Peugeot/Fiat/Ford - Belt Tension Wrench, 50516

Facilitates the pre-tensioning and locking of V-ribbed belt tensioners.

For the removal / installation of the V-ribbed belt in - situ on the vehicle even in very limited space condition.

Suitable for Citroën / Peugeot / Fiat / Ford 1.4L and 1.6L diesel engines.

Applications include: Citroën, Peugeot, Ford & Fiat 1.4 & 1.6 diesel engines.

Citroën: Berlingo, C1, C2, C3, C3 Picasso, C3 Pluriel, C4, C4 Picasso, C5, DS3, DS4, Xsara & Xsara Picasso.

Peugeot: Partner III, 206, 207, 308, 508, 3008, 5008.

Engines covered include DV4 & DV6 engines.

Engines: 1.4-1.6D

OEM No.: 0188-Z , G.0194-E3

Made in China

Petrol twin cam locking/setting tool set FIAT 1.6 16V, 50692A
Contents:
TDC Position tool – OEM No. 1 895 443 000
Tensioner adjuster – OEM No. 1 860 876 000
Camshaft Setting Plate ( Inlet and Exhaust ) - OEM No. 1 860 874 000

Applicable:
Fiat 1.6 16v twin cam petrol engine (95-) in:

Fiat: Brava, Bravo, Marea, Marea Weekend, Multipla, Palio, Stilo

Engine code:

178B3.000, 182A4.00, 182A6.000 & 182B6.000

Made in China

Engine Timing tool set for Fiat, Alfa Romeo, Lancia, 50318

Applicable: For petrol and diesel engines.

OEM Tools:
1 860 847 000; 1 860 875 000; 1 870 697 000; 1 860 895 000; 1 895 879 000; 1 860 898 000; 1 860 992 000
1 860 992 000; 1 863 000 (8mm); 1 860 771 000; 1 860 161 000, 1 860 874 00; 1 860 874 0001 860 876 000
1 860 845 000 ; 1 860 876 000; 1 860 965 000; 1 860 901 000; 1 860 905 010; 1 860 987 000; 1 860 985 000

63 pcs Fiat/ Alfa/ Lancia engine timing tool kit
Description:
This is the ultimate master Engine Timing Tool Kit for Alfa Fiat Lancia.
Comprehensive engine timing tool set for Italian cars.

Contents:
Includes all tools required for camshaft alignment, tensioning and crankshaft alignment to cover a wide range of petrol and diesel engines packed in blow moulded case with bespoke foam insert with perfect indents for every tool in the collection.
Suitable For:
Contains important tools for adjustment: flywheel, crankshaft, camshaft, fuel injection pump shaft, belt pulley, tensioning of the timing belt, complete classification chart included fits varoius engines.
- Alfa Romeo vehicle with 1.4;1.6 1.8, 2.0 and 3.0L 4 cylinders; 6-cylinder engine Alfa Romeo 145, 146, 147, 155, 156, 164, 166, GTA, GTV and Spider GT
- Fiat, Lancia vehicle with 1.2, 1.4, 1.6, 1.8 And 2.0L 4; 5-cylinder engine Fiat Panda, Punto, Palio, Siena, Bravo, Brava, Stilo, Marea, Multipla, Barchetta, Lancia Dedra, Delta, Kappa and Lydra.

Made in: China

Engine timing tool set – FIAT 1.3 JTD, 50824

Applications:
Alfa Romeo
MiTo / Fiat: 500, Albea (TR), Doblo/Cargo, Fiorino, Grande Punto, Idea, Linea, Panda, Puntı, Punto Evo
Ford: Ka Lancia: Musa, Ypsilon
Suzuki: Splash, Swift, Wagon R+ Ignes
Vauxhall Opel: Agila, Agila B, Astra-H, Astra-J, Combo-C, Corsa-C, Corsa-D, Meriva-A, Meriva-B, Tigra-B

Made in China

Fiat Alfa Romeo Lancia 1.2; 1.4 16V - Engine Timing Tool Set, 50523

Features: For adjusting the engine timing during timing belt replacement, cylinder head repair, replacement of the cylinder head gasket, etc.

Suitable for Alfa Romeo, Fiat and Lancia 1.2 16V / 1.4 16v / 1.4 T-Jet

Engine codes:

169A3000, 179B9000, 182B2000, 188A5000, 192B2000, 198A1000, 198A4000, 199A6000, 199A8000, 843A1000

Contents:

OEM 2.000.004.500 - Crankshaft locking tool (with screws M6x30 and 3 pcs. M8x16)

OEM 1.860.985.000 - Camshaft adjusting tool (1 pair)

OEM 1.860.992.000 - Adjusting tool for piston height

OEM 1.860.987.000 - Adjusting tool for timing belt tensioner

OEM 2.000.015.800 - Locking tool for camshaft sprockets (with screw M8x30)

Made in China

Engine timing tool kit - FIAT 1.2 8V & 1.4 VVT  16V; Ford 1.2 Duratec; Ford Ka 09-12, 50372

Description:
For locking the camshaft and crankshaft in place while changing the timing belt and performing other repairs on Fiat engines
Kit consists of a crankshaft locking tool, a camshaft setting plate and belt tensioner adjuster for the 1.2 engine, and an additional sprocket locking tool and alignment fitting for the camshaft on the 1.4 VVT engine

Applicable:
Fiat: 500 (07-12), Doblo / Cargo (05-10), Grande Punto (07-12), Idea (04-12), Linea (07-11), Panda EVO2, Punto EVO (09-12)
Lancia: Ypsilon (06-11), Musa (05-12)
Ford: Ka (09-12)
Engine models:
Fiat: 1.2 / 1.2 Dualogic, 169A4.000, 188A4.000 (EVO2), 199A4.000, 1.4 / 1.4 Bi-Fuel LPG / 1.4 Natural Power CNG, 199A7.000, 350A1.000
Lancia: 1.4 / 1.4 Bi-Fuel LPG, 350A1.000
Ford: 1.2 Duratec, 169A4.000 (FP4)
Contents:
Crankshaft Locking Tool - to be used as OEM 2.000.004.500 on Fiat / Lancia and OEM 303-1480 on Ford
Camshaft Setting Tool - to be used as OEM 2.000.004.400 on Fiat / Lancia and OEM 303-1479 on Ford
Camshaft Sprocket Locking Tool - to be used as OEM 2.000.004.200 on Fiat / Lancia and OEM 303-1477 on Ford
Camshaft Cover Aligner - to be used as OEM 2.000.004.300 on Fiat / Lancia and OEM 303-1478 on Ford
Tensioner Adjuster - to be used as OEM 1.860.987.000 on Fiat / Lancia

Made in China

Diesel engine setting / locking set - 1.3D JTD (M) / TDCi / DDiS / CDTi 16v Chain Drive, 50310A

Suitable for synchronizing camshaft and crankshaft with chain drive 1.3. The set also has a locking pin for tensioning.
OEM Tools:       
Alfa Romeo/Fiat/Lancia: 1.871.00.900,
Ford:  303-1472,
Suzuki:  09912-38300, 09916-98610, 09917-68610,
Vauxhall/Opel: EN-46781, EN-46785, KM-955