AUTOMOTIVE SPECIALTY TOOLS

VAG Cam Chain Tensioner Locking Tool, 058-62237
Compresses the camshaft chain tensioner safely and easily when removing camshafts or replacing the tensioner or its gasket. These tasks are virtually impossible without the correct tool.
The tool threads into the guide, compressing the tensioner, relieving chain tension.
The no-mar plastic contact surface will not harm the tensioner face.
Applicable:
Audi: A4, A6, A8, TT, S4, S6, RS6
Seat: Ibiza, Cordoba, Leon, Toledo, Alhambra
Skoda: Octavia
Volkswagen: Polo, Golf, Jetta, Passat, Beetle, Touareg
Engine Codes: ADR, AEB, AFY, AGN, AGU, AHA, AJE, AJH, AJL, AJP, AJQ, AMB, AMK, AMU, ANB, APB, APG, APH, APP, APT, APU, APX, ARH, ARK, ARX, ARY, ARZ, ATC, ATQ, AUM, AUQ, AVC, AWC, AWM, AWN, AWP, AWT, AWV, AYP, BAM, BBD, BCY, BEA, BEL, BFM, BKF, BNU
OEM №: 3366

Made in Taiwan

Timing Tool set for Petrol Citroen C3 Peugeot 208, 308, 2008 SUV, Psa 1.0 1.2 Vti, 780-8331

To check and adjust the camshaft and crankshaft in the correct TDC position.
Applicable: Peugeot 208 (2008); 2012 Citroen C3
Engine code: 1.0, 1.2 VTi petrol engine: EBO (ZMZ), EB2 (HMZ)
OEM number: 0109-2A, 0109-2B

Made in Taiwan

Crankshaft pulley holding tool BMW 3/5 Series, 846-8083А

Features:
Holds vibration damper when loosening or tightening centre crankshaft bolt.
Applicable: BMW 3 series E46 (1998 - 2007), 5 series E39 (1996 - 2003)
BMW E81 120d 163PS
BMW E46 318d 116PS - 318td 115PS - 318dt 115PS - 318d, 115PS - 320d 136PS - 320td 150PS - 320d 150PS
BMW E90 318d 150PS - 320d 150PS - 320d 163PS
BMW E91 318d 122PS - 320d 150PS - 320d 163PS
BMW E39 520d 136PS
BMW E60 520d 163PS - 520d 150PS
BMW E61 520d 150PS - 520d 163PS
BMW X3 E83 2.0d 150PS
OEM No. 11 6 310 (11 6 311 holder, 11 6 312 centring tube)
Centering tube OD: 60mm, ID: 49mm

Made in Taiwan

Engine timing kit - VAUXHALL/OPEL 1.6 CDI, 011262505

A comprehensive kit to lock the 1.6 diesel engine into its timed position for the removal and replacement of the timing chain to the models listed.
Included in this kit is the added component of the camshaft sprocket support bracket that is required when removing the camshaft for essential work on the Cam followers
Applications: Astra-J, Meriva-B, Mokka, Zafira-C, Tourer 2013 onwards (CDTi, EcoFlex CDTi)
Engine codes; LVL/B16DTH, LVM/B16DTL, LVL/B16DTN, LVM/B16DTC, LWQ/B16DTE, LVL/B16DTJ

Made in Taiwan

Engine timing tool set - Reanult 2.2/2.5 dCi

Purpose:
For adjusting the camshaft of Renault Esapce2.2 DCI-Master 2.2 / 2.5DCI
Application:
- Renault: Laguna II, Espace, Master, Trafic, diesel engines 2.2 / 2.5 DCi
- Opel: Vivaro, Movano, diesel engines: 2.2 / 2.5 DTi, Astra B, Vectra B, Signum, Zafira, petrol engines 2.2 16V
Origin: Taiwan
 

VAG 1.2/1.6 TDi и 2.0L TDI engines - Diesel injector remover, 011108019A

Applicable:
Volkswagen Golf 2009, Seat Ibiza 2008, Altera 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013.
Engines: 1.2L TDi CR 55Kw Diesel, 1.6L CRTD Diesel and 2.0LTDI Diesel.
OEM tools: T10402, T10415, T10055.
Use according to OEM instructions.
No solenoid removal is required.

Made in Taiwan

VW, AUDI Head bolt socket, 846-7107

Features:
- 125 mm Overal length for restricted areas
- S2 10 mm Polydrive 6-pt. bits (RIBE 10 mm)
- 1/2"Dr. Cr-V Socket
- Not for impact use.

Applicable: Fits 1998 and later VW/Audi 5 Valve engines (V-6 and 4 cylinder)

Made in Taiwan

Engine timing tool kit - VAG VW AUDI 1.4 1.6 2.0i TDi CR 2012 ON, 780-8364

An 8 piece kit consisting of the components required to lock the crankshaft. Cam pulleyand fuel pump pulley in their timed positions to allow the removal and replacement of the camshaft timing belt
Contents:
A. 2.5mmTensioner Locking Tool, OEMT10265

B.Auxiliary Drive Tensioner Pin, OEMT10060A

C.Cam Shaft Pulley Timing Pin, OEM 3359

D.Fuel Pump Holding Tool, OEMT10051

E.Crankshaft Timing Tool, OEMT10490

F. 6mm Ball Hex Key, OEMT10264
G.Pin for E
Application: Post 2012 1.6 & 2.0 TDI Common Rail Diesel engines found in the Audi, Seat, Skoda and Volkswagen:
VW: Golf SV/Sportsvan, Golf VII, Golf VII Estate, Golf VII Wagon, Polo
SEAT: Leon, Leon ST
AUDI: A3 Cabrio, A3 Saloon, A3 Sedan, A3/A3 Sportback, A4, A4 allroad, A4 quattro,A5 Coupe/Cabriolet, A5 Sportback, A6, Q5,TT
SKODA: Octavia III
Engine: 1.4TDI CR, 1.6TDI CR, 1.6TDI CR GreenLine, 1.6TDI CR BlueMotion, 1.6TDI CR Ecomotive, 2.0TDI CR, 2.0 RS TDI CR, 2.0TDI CR Ultra
Engine code: CKFB, CKFC, CLHA, CLHB, CNHA, CNHC, CRBC, CRBD, CRFA, CRFC, CRKA, CRKB, CRLB, CRLC, CRMB, CRVA, CRVC, CSUA, CSUB, CUNA, CUPA, CUTA

Made in Taiwan

VW, AUDI Camshaft locking tool (4.2), 058-625000

Features: For engine synchronizationVW/Audi engines 2.5L I5 (BGP, BGQ, BPR, BPS, CBTA & CBUA),

3.2l [V6](4v)(BKH),4.2L[V8](4V)(BAR,BNS,BVJ, BYH & CAUA) & 5.2L (V10)(4v)(BXA & BSM).

Applicable: (20005-2008),A4 Avand (2005-2008),A4 Cabriolet(2007-2009),A6(2005-2009),A6 Avant (2006),A8(2007-2009),A8 L (2007-2009),Q7(2007-2009),R8(2008-2009), RS4(2007-2008),S5(2008-2009),S6(2007-2009)& S8(2007-2009) VW JETTA (2005-2012),

JETTA SPORTSWAGEN (2008-2009), BEETLE (2006-2010), BEETLE CONV. (2006-2010),

RABBIT(2006-2009) & TOUAREG (2007-2009)
No.to OEM #T40070

Made in Taiwan

Engine Timing chain tool set - Vauxhall/Opel 1.0/1.4 Petrol, 011208962

Timing kit Vauxhall/Opel 1.0/1.4 for locking both camshafts in a timed position while the timing chain is being replaced
Application: Vauxhall/Opel Adam Astra-K, Corsa-E Turbo SIDI, EcoFlex, Turbo
Engine codes:
1.0lt:LE1/B10XFL, LE1/B10XFF, LE1/B10XHL, LE1/B10XFT
1.4LT: LV7/B14XE, LE2/B14XFL, LE2/B14XFT
OEM: EN-51367, EN-51298, EN-51632
Year 2014-2017

Made in Taiwan

Timing tool set - GM / Opel - 2.2L petrol engines, 780-8032

Features:
- To lock or position the camshaft and synchronize the chain tension during engine repair.
- When disassembling and installing the water pump. The latch of the water pump belt pulley is blocked by the retainer.
Also used for removal and installation of water pump. It is necessary to lock the water pump Also applicable to 2.4L engines.
Application:
Models:
Astra / Vectra (02-08)
Astra Vectra vx220 Zafira and Signum (00-04)
Engines: Z22SE
Engine Code: K9K, G9T, G9U.
OEM No: KM 6148 / KM 6077 / J-43651

Made in Taiwan
 

Engine timing tool set - VW; AUDI V6 3.2FSI, 741-0047A

Special Designed Set of Tools for Aligment Camshaft Locking and Adjusting.
With 1 Camshaft Adjusting Socket. VM# T40058.
With 2 Camshaft Stopping Pins. VM# T40071.
Applicable: VW, Audi A4/A6/ A8/ Q7/ R8 3.2, 4.2, 5.2 FSI with Engine AUK, A6L/ Quattro 2.4 with Engine BDW.

Made in Taiwan

Fill Plug Socket - T55 Inside TORX - 17 mm Drive, 04A101755

Size: T55 x 17 mm
Saves time when checking, replacing and adding transmission fluid.
It makes it easier to remove and install the plug.

Code: 505135

Made in Taiwan

Timing Belt Change Engine Tool Set for Fiat, Ford, Lancia 1.2 & 1.4 8V, 780-8141

Features:
For locking the camshaft and crankshaft in place while you change the timing belt and perform other repairs on Fiat engines.
Kit consists of crankshaft locking tool, camshaft setting plate and belt tensioner adjuster for the 1.2 engine, and additional sprocket locking tool and alignment fixture for the camshaft on the 1.4 VVT engine.

Applicable:
Facilitates changing of the timing belt and allows checking of the engine timing on following cars:
- Fiat: 500 (07-12), Doblo/Cargo (05-10),Grande Punto (07-12), Idea (04-12), Linea (07-11), Panda EVO2, Punto EVO (09-12).
- Lancia: Ypsilon (06-11), Musa (05-12).
- Ford: Ka (09-12).
Fits following engines mdodels:
- Fiat: 1.2/1.2 Dualogic, 169A4.000,188A4.000 (EVO2), 199A4.000 1.4/1.4 Bi-Fuel LPG / 1.4 Natural Power CNG,199A7.000, 350A1.000.
- Lancia: 1.4/1.4 Bi-Fuel LPG, 350A1.000.
- Ford: 1.2 Duratec, 169A4.000 (FP4).
Includes following tools:
- Crankshaft Locking Tool
  to be used as OEM 2.000.004.500 on Fiat/Lancia and OEM 303-1480 on Ford.
- Camshaft Setting Tool
 to be used as OEM 2.000.004.400 on Fiat/Lancia and OEM 303-1479 on Ford.
- Camshaft Sprocket Locking Tool
 to be used as OEM 2.000.004.200 on Fiat/Lancia and OEM 303-1477 on Ford.
- Camshaft Cover Aligner 
to be used as OEM 2.000.004.300 on Fiat/Lancia and OEM 303-1478 on Ford.
- Tensioner Adjuster
 to be used as OEM 1.860.987.000 on Fiat/Lancia.

Made in Taiwan

Camshaft alignment tool -BMW N47, N47S, N57 - Diesel engines, 011262439A

Designed for the locking/positioning of camshafts and crankshaft.
Suitable for the 1.6, 2.0 or 3.0 l BMW engine such as BMW 1 Series, 3 Series, 5 Series, 7 Series, X1, X3, X5, X6; Mini Clubman, Countryman, Cooper D, Cooper SD, One D.
Engine codes: N47, N47-C16K1, N47-C16U1, N47-C20K1, N47-C20U1, N47-D20A, N47-D20C, N47-D20D, N47-D20K0, N47-D20K1, N47-D20O0, N47-D20O1, N47-D20U0, N47-D20U1, N47S-D20B, N47S-D20D, N47S-D20T0, N47T-D20K1, N47T-D20O1, N47T-D20U1, N57-D30A, N57-D30A0, N57-D30O0, N57-D30O1, N57-D30T0, N57-D30U0
OEM Ref: 115320,118760,116480,118741,118742,113340

Made in Taiwan