AUTOMOTIVE SPECIALTY TOOLS
VAG Cam Chain Tensioner Locking Tool, 058-62237
VAG Cam Chain Tensioner Locking Tool, 058-62237
Compresses the camshaft chain tensioner safely and easily when removing camshafts or replacing the tensioner or its gasket. These tasks are virtually impossible without the correct tool.
The tool threads into the guide, compressing the tensioner, relieving chain tension.
The no-mar plastic contact surface will not harm the tensioner face.
Applicable:
Audi: A4, A6, A8, TT, S4, S6, RS6
Seat: Ibiza, Cordoba, Leon, Toledo, Alhambra
Skoda: Octavia
Volkswagen: Polo, Golf, Jetta, Passat, Beetle, Touareg
Engine Codes: ADR, AEB, AFY, AGN, AGU, AHA, AJE, AJH, AJL, AJP, AJQ, AMB, AMK, AMU, ANB, APB, APG, APH, APP, APT, APU, APX, ARH, ARK, ARX, ARY, ARZ, ATC, ATQ, AUM, AUQ, AVC, AWC, AWM, AWN, AWP, AWT, AWV, AYP, BAM, BBD, BCY, BEA, BEL, BFM, BKF, BNU
OEM №: 3366
Made in Taiwan
Volvo 2.0 - Diesel Engine Timing Tool Kit, 50983
Volvo 2.0 - Diesel Engine Timing Tool Kit, 50983
Features: To lock and hold the crankshaft and high pressure fuel pump on the current range of Volvo 2.0L diesel engines in the method specified by the manufacturer.
The kit includes all the special tools required to time the engine when performing a timing belt change.
Applications: Volvo S60 (2011-2018), S80 (2007-), S90 (2017-), V40 (2013-), V60 (2011-2018), V70 (2008-), V90 (2017-), XC40 (2017-), XC60 (2014-), XC70 (2008-), XC90 (2016-).
Engine codes: D4204T11, D4204T12, D4204T14, D4204T16, D4204T17, D4204T20, D4204T23, D4204T4, D4204T5, D4204T6, D4204T8, D4204T9.
OEM No.: 999 7495, 999 7233
Made in China
BMW N-series Crankshaft Locking Tool, 50575
BMW N-series Crankshaft Locking Tool, 50575
Used to lock crankshaft when releasing or tightening the central bolt.
Suitable for BMW N12, N14, N40, N42, N45, N46, N52, N52, N53, N54 engines.
OEM#: 11 9 280
Made in China
Renault/Nissan V6 3.0 DCi V9X - Engine timing tool set, 50549
Renault/Nissan V6 3.0 DCi V9X - Engine timing tool set, 50549
Applicable:
Renault: Renault Espace, Renault Vel Satis, Grand Espace 4, Renault Master
Nissan: Nissan INFINITY, Nissan Navara, Nissan Pathfinder (R51)
Engine:
Renault 3.0 DCI, Nissan / Infiniti - 3.0 D
Engine Code: V9X
Made in China
Fiat Alfa Romeo Lancia 0.9 Twin Air Chain Drive - Engine Timing Tool Set , 50294
Fiat Alfa Romeo Lancia 0.9 Twin Air Chain Drive - Engine Timing Tool Set , 50294
Designed to lock the cam and crankshaft in position to allow the removal and replacement of the timing chain fitted to the new low emission and high economy twin cylinder Fiat engine.
Note: Fiat state that after rebuild these engines should be placed on suitable electronic diagnostic software for the onboard electronic control systems to be reset.
Content:
Pulley Locking Pin
Flywheel Locking Pin
Camshaft Locking Plate
Balancing shaft adjustment tool
Applicable:
Alfa Romeo:MiTo(2012-2015)
Fiat: 500/500C(2010~), Panda(2012~), Punto(2012~)
Lancia: Ypsilon(2011~)
Engine code: 0.9 Twin Air Turbo: 312A2.000
OEM №: 2.000.035.300; 2.000.035.200; 2.000.035.100; 2.000.038.300
Made in China
SUBARU Forester 2500 c.c. Camshaft Pulley Holder, 50223
SUBARU Forester 2500 c.c. Camshaft Pulley Holder, 50223
Features: To fixing the timing belt and easy to remove or install it. With three fixing points.
Application: SUBARU FORESTER 2500 c.c.
Made in China
Citroen C3 Peugeot 208, 308, 2008 SUV, Psa 1.0 1.2 Vti Engine Timing Tool set for Petrol, 780-8331
Timing Tool set for Petrol Citroen C3 Peugeot 208, 308, 2008 SUV, Psa 1.0 1.2 Vti, 780-8331
To check and adjust the camshaft and crankshaft in the correct TDC position.
Applicable: Peugeot 208 (2008); 2012 Citroen C3
Engine code: 1.0, 1.2 VTi petrol engine: EBO (ZMZ), EB2 (HMZ)
OEM number: 0109-2A, 0109-2B
Made in Taiwan
BMW N47; N47S; N57 Engine Timing tool kit, 50070
Engine Timing tool kit - BMW N47; N47S; N57, 50070
Suitable for setting the camshaft in diesel engines with chain drive. For turbocharged BMW 4 & 8 cylinder diesel engines with the motor identification letters N47, N47S, N57 or N57S.
Set includes:
Crankshaft lathe – OEM No. 116480
Camshaft locking – OEM No. 118750
Camshaft lock OEM 118760
Sprocket Puller OEM 118740/118741
Crankshaft wheel locking pin OEM 115320
Crankshaft holding tool OEM 114320
Crankshaft locking tool OEM 118790
2 x piece pin to lock the chain tensioner OEM 113340
Applicable :
For BMW
Series 1: 116d 118d 120d 123d (E81, E82, E87, E88, F20)
Series 3: 316d 318d 320d 325d 330d (E90, E91, E92, E93, F30)
Series 5: 520d 525d 530d 530d 535d 535d GT GT M550d (E60, E61, F07, F10, F11)
Series 6: 640d (F12)
Series 7: 730d 740d 750D (F01)
Series X1: 1.8d, 2.0d, 2.3d, (E84)
Series X3: 1.8d, 2.0d, 3.0d, 3.5D (F25, E83)
Series X5: 3.0d, 4.0d, M5.0d, (E70)
Series X6: 3.0d ; 4.0d; M5.0d, (E71)
Engine Codes:
2.0 N47 and N47S (2007-2015)
Made in China
VAG 3.0 / 2.9 TFSI (EA839) - Engine Timing Tool Set, 51039
VAG 3.0 / 2.9 TFSI (EA839) - Engine Timing Tool Set, 51039
Features:
Designed to fix the camshafts in position when removing and installing the camshaft timing chains.
Suitable for VAG 6-cylinder 3.0, 2.9 4-valve TFSI (EA839) petrol engines.
Applications:
Audi: A6 (2019-); A7 (2018-); A8 (2019-); Q7 (2019-); Q8 (2019-); S4 (2016-); S5 (2016-); SQ5 (2017-); RS4 (2017-); RS5 (2017-)
VW: Touareg III (2018-)
Engine codes: CWGD; DECA; CZSA; CZSE; DLZA; DCBD; DCBE
OEM No. T40331
Made in China
Ford Transit 2.0TDCi - 32mm Diesel Fuel Filter Socket, 50980
Ford Transit 2.0TDCi - 32mm Diesel Fuel Filter Socket, 50980
Features: Used for remove and install th fuel filter on Ford EcoBlue 2.0 TDCi diesel engines from 2016. Cut out in the socket clears the fuel drain valve.
Size: 1/2"Dr.; 32 mm 6-pt.
Material: Cr-V (Chrome Vanadium)
Application:
Ford Transit Custom MK8 2.0TDCi 2016 onwards.
Made in China
BMW N20/N26 Flywheel Locking Tool, 50570
BMW N20/N26 Flywheel Locking Tool, 50570
Description:
Great for Replacing The Timing Chain.
Works on BMW N20 and N26 engines.
Used for securing the crankshaft with the transmission installed(connected to engine)
Comparable to BMW Factory Tool No. 83302222742
(Note: Automatic transmissions only.)
Features:
While replacing the timing chain, this tool can hold the flywheel;
It helps to release and tighten down the central bolts on the vibration damper.
Application:
BMW 125i N20 2012-2017;
BMW 220i N20 2014-2018
BMW 225i N20 2014-2017
BMW 228i N20 2014-2016
BMW 320i N20 2012-2015
BMW 320i GT N20 2013-2016
BMW 328i N20 2011-2016
BMW 328i GT N20 2013-2016
BMW 520i N20 2011-2016
BMW 520Li N20 2013-2016
BMW 525Li N20 2013-2016
BMW 528i N20 2011-2017
BMW X1 xDrive/sDrive20i N20 2011-2015
BMW X1 xDrive/sDrive28i N20 2011-2015
BMW X3 N20 2013-2018
BMW X3 xDrive20i N20 2011-2018
BMW X3 xDrive28i N20 2012-2018
BMW X4 xDrive20i N20 2014-2017
BMW Z4 N20 2013-2015
BMW Z4 sDrive20i N20 2011-2016
BMW Z4 sDrive28i N20 2011-2016
BMW 328i / 328iX N26 2012-2016
BMW 228i / 228iX N26 2012-2016
Made in China
Vauxhall/Opel 2.0CTDi - Diesel Engine Timing Tool Kit, 50533
Vauxhall/Opel 2.0CTDi - Diesel Engine Timing Tool Kit, 50533
Features:
For the replacement of the timing chain within the cylinder head.
For locked the camshafts into their timed position during timing chain replacement.
Application: Vauxhall/Opel 2.0 CDTi - LFS/B20DTH, LFS/B20DTR (2.0 CDTi from 2014).
Models: Antara (from 2016), Cascada (from 2015), Insignia-A/Country Tourer (2014-2017), Insignia-B/Country Tourer (from 2017), and Zafira-C Tourer (from 2014); CDTi EcoFLEX Blueinjection.
OEM# EN 51415, EN 51418.
Made in China
Land Rover / Jaguar 3.0 3.5 4.0 4.2 & 4.4 V8 – Engine timing tool set, 50833
Land Rover / Jaguar 3.0 3.5 4.0 4.2 & 4.4 V8 – Engine timing tool set, 50833
Features: To hold camshaft during timing chain replacement.
Application:
Land Rover:
Gas 4.2 / 4.4 V8 Chain
Engine: AJ34
New Range Rover - LM (06-08)
Range Rover Sport - LS (05-08)
Discovery III - LA (05-08)
Jagular:
Gas 3.2 / 3.5 / 4.0 / 4.2 V8 Chain
Engines:
AJ26, AJ27, AJ28, AJ34
XJ (97-08)
S-Type (99-08)
XF (08-)
XK (97-08)
Note: This does not work for the Range Rover, BMW Engines.
Made in China
Renault/Nissan 1.4; 1.6; 2.0; 2.5; 3.5 – Engine timing tool set , 50259
Renault/Nissan 1.4; 1.6; 2.0; 2.5; 3.5 – Engine timing tool set , 50259
Features:
For locking the flywheel and front puller of Renault / Nissan 1.4 cars; 1.6; 2.0; 2.5; 3.5 with two cams, chain-driven petrol engines. It is also for locking the flywheel of M9R / 2.0 and M9T / 2.3 diesel engines.
Engine codes:
H4JT / 1.4
M5M / 1.6
MR4 / 2.0
2TR / 2.5
V4Y / 3.5
OEM equivalent:
МОТ 919-02
ТОТ 1431
МОТ 1716
МОТ 2019
МОТ 1789
Made in China
Subaru Camshaft sprocket holder, 50822
Subaru Camshaft sprocket holder, 50822
Used to fixing the Subaru camshaft to the 2.5L Turbo and 3.6L 6-cylinder 2005 engines, including newer models.
Compare with its Subaru factory number 499977500.
Overall tool length: 475mm
Application: Subaru 2.5 L Turbo and 3.6L 6-cylinder engines.
Made in China