PROFESSIONAL PNEUMATIC TOOLS

Airless Spray Gun 818C

In-handle paint filter reduces tip clogs and improves finish.
Well-balanced and lightweight.
Ergonomic design and easy trigger pivot reduce operator fatigue.

Parameters:
Pattern Width: 254-305mm
Type of feed: Pressure
Operating Pressure: 3600 PSI
Paint inlet connection: 1/4-18-NPSM
Standard Nozzle Size: 0,43 mm (0.017")

Made in China

7.6m High Pressure Hose, AP8648

Usage: For Airless Paint Sprayer Painting Machine
Pressure: 229 Bar
Size: 6.35mm (7.6m)

Made in China

Filter for airless spray gun AP8628

Art. № AP8056-4

Compatible with Airless Paint Sprayer, AP8628

For D16 hose

Made in China

Airless Paint Sprayer Painting Machine Ceiling Spray Gun AP8628

Widely used in the coating of ships, rolling stock, chemical equipment, steel structures, small and medium-sized interior and exterior walls, commercial and industrial buildings.

Features:
Easy to disassemble the suction tube, easy to maintain and clean.
The sealing ring is super wear-resistant.
Economical and practical, cost-effective.
The new circuit control makes the voltage more stable.
Rated Voltage: 220±10%(V)/110V
Frequency: 50Hz
Motor: Brush motor
Motor power: 950±10%W
Max pressure: 3000PSI
Max flow rate: 2.0±10%(L/min)
Standard Nozzle size: 0,43 mm (0.017”). Max nozzle size for single gun 0,53mm (0.021'')
Output connection: 1/4-18NPSM
Length of high pressure hose: 15m  (Max length: 50m)

Weigh: 11 kgs

Made in China

1400 Nm 1/2”Dr. Professional Composite Air Impact wrench A301

Impact part, drive shaft, rotor are processed by Ipsen heat treatment equipment which we imported from Germany, ensuring a more durable wear, greatly extend the lifetime
Twin hammer impact wrench is designed for tire shop, suspension, frame and other heavy duty automobile work (screened filter) air inlet keeps dirt and debris from damaging the tool.
POM blade and industrial P6 bearings,extend the lifetime; High quality oiling bushing effectively extend the lifetime of anvil
Heat-treatment impact parts for longer life
Technical Data:
Square Drive:1/2"
Free Speed: 7000 Rpm
Working Torque:1400 N.m
Bolt capacity: 5/8"(M16)
Air Inlet :1/4"
Air Hose(Id):3/8"
Avg.Air Consumption: 6.5cfm,183.9 l/Min
Net Weight: 2.1kg
Overall Length: 185mm
Recommended Air Pressure: 90PSI (6.3bar)

Made in China

1.8 m Extension for paint sprayer, AP8641-5

The original sprayer distance of the spray gun 818C can be extended while adopt this extension pipe.
It can be applied for painting onto the ceiling and high place of the wall, ladder is no londer needed.

Lenght: 1.8 m

Made in China

AEROPRO Dust Extractor Collector, A302

Description:
Multiple Filtration&Water Filtration.
Dust Collecting More Than 99%
Adjustable Motor Speed.
Advanced Blow And Back Flush Function.
With Aeropro Professional Air Self Vacuuming Sander.
Can connect to 2 pcs of air sanders at the same time.

Technical parameters:
Voltage: 220V/50Hz
Power: 1600 W
Dust Collecting Barrel: 30L

Weight: 21 kg

1/2" Professional Air Impact wrench, AP7426

Description:
Smart design, only 112 mm length.
Better for narrow space operation.
Jumbo hammer impact design.
High working torque.
Rear air exhaust, clear and low noise.
Ergonomic handle design, feel good, easy operation.
Power adjustable meet for different application.
Bolt size: 10-16 mm.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Technical Parameters:
Square drive: 1/2" Dr.
Capacity bolt size: 5/8” ( 16 mm)
Free speed: 8500 rpm
Working torque: 610 Nm (450 Ft-lb)
Sug. Air comp. 3 HP
Avg.Air Consumption: 5 cfm (141.7 l/min)
Air Inlet :1/4"
Air Hose(Id):3/8"
Net Weight: 1.45 kg
Overall Length: 112 mm

1.0 m Extension for paint sprayer, AP8641-4

The original sprayer distance of the spray gun 818C can be extended while adopt this extension pipe.
It can be applied for painting onto the ceiling and high place of the wall, ladder is no londer needed.

Lenght: 1.0 m

Made in China

0.6 m Extension for paint sprayer, AP8641-2

The original sprayer distance of the spray gun 818C can be extended while adopt this extension pipe.
It can be applied for painting onto the ceiling and high place of the wall, ladder is no londer needed.

Lenght: 0.6 m

Made in China

Pneumatic Needle Scaler RP7658

Features:
Best choice for small scale removal of mentle, rust and paint of construction industry, automobile industry and funriture industry.
Main features:
Precision heat-threated needles for maximum performance.
Nineteen 1/8" diameter steel needles.
Max. Working Pressure:  6.3bar (90PSI)
Technical Data:
Blow Per Min: 4500
Air Consumption: 79.2 l/min. (2.8 cfm)
Chisel Shank: 10.2mm (2/5")
Bore Diameter (ID): 19mm (3/4")
Air Inlet (NPT): 1/4"
Air Hose (ID): 3/8"
Net Weight: 1.97 kgs

Made in China

1/2" Professional Air Impact wrench, AP17407
Features:
· Soft rubber design handle, lighter in weight, less fatigue after long operating ;
· Twin hammer design made of special alloy steel ,more durable and powerful.
· Heat-treatment impact parts for longer life.
· 3 level torque adjustable , apply to different torque requirement , easy to operate.
· Suitable for automobile repair shop, automotive products assembly line to tighten the bolt.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Technical Parameters :
Square Drive: 1/2"
Free Speed: 7500 Rpm
Working Torque: 450ft-Lb, 610 n.m
Bolt capacity: 5/8"(M16)
Air Inlet :1/4"
Air Hose(Id):3/8"
Avg.Air Consumption: 6.5cfm,183.9 l/Min
Net Weight: 2.750 kg
Overall Length: 185 mm

3/8” Reversible Air Drill AP17106

Lightweight body made of composite material, resistant to both low and high temperatures;
The rotor is heat treated;
High precision chuck;
The elements of the machine are made of high quality materials for a long service life.
Parameters:
Chuck: 3/8 "
Free speed: 1800 rpm
Air Inlet (NPT): 1/4 "
Air hose: 3/8 "(ID)
Overall length: 170 mm
Average air consumption: 113.3 l / min (4 cfm)
Sug.Air Comp: 2HP
Net weight: 0.94 kg

Made in China

1355 Nm 3/4"Dr. Professional composite Air impact wrench AP7460

Impact part, drive shaft, rotor are processed by Ipsen heat treatment equipment which we imported from Germany, ensuring a more durable wear, greatly extend the lifetime;
Composite gun body, light weight, not easy deformation, good air tightness.
POM blade and industrial P6 bearings,extend the lifetime;
High quality oiling bushing effectively extend the lifetime of anvil;
Could passed drop testing by 1 meter high;
3-5 seconds to achieve the maximum torque;
7.25 million screw life
Technical data:
Square drive: 3/4 "
Capacity Bolt Size: 1 " (25 mm)
Free speed: 6500 rpm
Working torque: 1355N.m (1000Ft-Lb)
Overall lenght: 208 мм
Air inlet (NPT): 3/8 "
Avg.Air Consumption: 9.5cfm (269I / min)
Sug.Air Comp: 3HP
Air Hode (ID): 12mm (1/2")
N.W.: 6.6Lbs (3.0Kgs)

Made in China

1800 Nm 3/4"Dr. Professional Air impact wrench AP7462

Powerful professional high quality wrench.
Heat treated impact mechanism.
Comfortable composite top handle for more control during operation.
Anvil 3/4 ”Dr., Made of steel alloy
3-5 seconds to achieve the maximum torque
Application: when changing tires, repairing trucks and buses, heavy equipment, agricultural equipment and other activities in car repair shops and industry.
RECOMMENDED PRESSURE: 90 Psi (6.3 Bar)
Features:
Square Drive: 3/4 "
Capacity Bolt Size: 1 "(25 mm)
Free speed: 4600 rpm
Operating torque: 1800 N.m (1328Ft-Lb)
Overall length: 253 mm
Air Inlet (NPT): 3/8 "
Average air consumption: 6.5cfm (183.9I / min)
Sug.Air Comp: 3HP
Air hose: ID 12mm (1/2 ")
Net weight: 7.0 Kgs

Made in China