AIR TOOLS
Airless Paint Sprayer Painting Machine Ceiling Spray Gun AP8628
Airless Paint Sprayer Painting Machine Ceiling Spray Gun AP8628
Widely used in the coating of ships, rolling stock, chemical equipment, steel structures, small and medium-sized interior and exterior walls, commercial and industrial buildings.
Features:
Easy to disassemble the suction tube, easy to maintain and clean.
The sealing ring is super wear-resistant.
Economical and practical, cost-effective.
The new circuit control makes the voltage more stable.
Rated Voltage: 220±10%(V)/110V
Frequency: 50Hz
Motor: Brush motor
Motor power: 950±10%W
Max pressure: 3000PSI
Max flow rate: 2.0±10%(L/min)
Standard Nozzle size: 0,43 mm (0.017”). Max nozzle size for single gun 0,53mm (0.021'')
Output connection: 1/4-18NPSM
Length of high pressure hose: 15m (Max length: 50m)
Weigh: 11 kgs
Made in China
AEROPRO Dust Extractor Collector, A302
AEROPRO Dust Extractor Collector, A302
Description:
Multiple Filtration&Water Filtration.
Dust Collecting More Than 99%
Adjustable Motor Speed.
Advanced Blow And Back Flush Function.
With Aeropro Professional Air Self Vacuuming Sander.
Can connect to 2 pcs of air sanders at the same time.
Technical parameters:
Voltage: 220V/50Hz
Power: 1600 W
Dust Collecting Barrel: 30L
Weight: 21 kg
Pneumatic Needle Scaler RP7658
Pneumatic Needle Scaler RP7658
Features:
Best choice for small scale removal of mentle, rust and paint of construction industry, automobile industry and funriture industry.
Main features:
Precision heat-threated needles for maximum performance.
Nineteen 1/8" diameter steel needles.
Max. Working Pressure: 6.3bar (90PSI)
Technical Data:
Blow Per Min: 4500
Air Consumption: 79.2 l/min. (2.8 cfm)
Chisel Shank: 10.2mm (2/5")
Bore Diameter (ID): 19mm (3/4")
Air Inlet (NPT): 1/4"
Air Hose (ID): 3/8"
Net Weight: 1.97 kgs
Made in China
3/8” Reversible Air Drill AP17106
3/8” Reversible Air Drill AP17106
Lightweight body made of composite material, resistant to both low and high temperatures;
The rotor is heat treated;
High precision chuck;
The elements of the machine are made of high quality materials for a long service life.
Parameters:
Chuck: 3/8 "
Free speed: 1800 rpm
Air Inlet (NPT): 1/4 "
Air hose: 3/8 "(ID)
Overall length: 170 mm
Average air consumption: 113.3 l / min (4 cfm)
Sug.Air Comp: 2HP
Net weight: 0.94 kg
Made in China
Air grease gun w/4pcs accessories, 0082
Air grease gun w/4pcs accessories, 0082
Features:
- 1pc-air grease gun
- 1pc-handle
- 1pc-rubber tube
- 1pc-aluminum tube
- 1pc-quick coupler
Specification:
Highest pressure: 90 Psi (6 Bar)
Operating pressure: 4.0 Bar
Capacity: 500cc(bulk)/16 oz
Air hose: 3/8"
Air Inlet: 1/4"
Air consumption: 3.5 - 6 cfm (100- 170 l/min)
Made in China
2-in-1 Brad Nailer and Stapler, SF5040E
2-in-1 Brad Nailer and Stapler, SF5040E
Features:
Nail head and drive pin are processed by German Ipsen heat treatment, high strength, wear resistance.
More than 10-15 million times Pin life.
Jamed nail rate at about 0.03%.
Air-class cushion bumper wear-resistant bumper.
Sequential fire function.
High-strength hard alumina shell wear resistanc.
When the nail is used up, it will be displayed on the clip.
Handle sheath TPE material is soft and will not crack.
High-strength aluminum alloy die-casting gun body.
Nail Depth adjustment device for different occasions.
360 degree exhaust cover
Technical Parameters :
Max pressure: 120psi (8.3bar)
Load capacity: 100pcs
Operating pressure: 60-100psi (4- 7bar)
Max.pressure: 120psi
Nail length: 10-50mm
Stapler length: 16-40mm
Stapler width: 5.7 mm
Weight: 1.48kg (3.26lb)
Dimension: 55 x 245 x 250 mm
6” (150 mm) Air Polish (Side exhaust), AP17316
6” (150 mm) Air Polish (Side exhaust), AP17316
Main features:
Mainly used in shipbuilding, automotive and other industries for polishing and cleaning.
Composite plastic body, light weight.
Unique ergonomic design.
Side exhaust.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Specification:
Sanding Pad: 6"
Free Speed: 10000 Rpm
Air Inlet (Npt): 1/4"
Air Hose(Id): 3/8"
Avg. Air comsumption: 5 cfm (141.5 l/min)
Recommended Air pressure: 90 Psi (6.3 Bar)
Sug.Air Comp: 2HP
Net Weight: 1.84kg
Overall Length: 240 mm
Optional: Sanding pad Ø150 mm - 12.00 lv.
1/4" Air Die Grinder, RP27313
1/4" Air Die Grinder, RP27313
Description:
Light weight aluminum body.
Safety trigger prevents accidental starts.
Rear exhaust.
It can be used with all types of accessories for porting,weld breaking,and smoothing sharp edges,as well as deburring polishing,and grinding.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Technical Parameters:
Free Speed: 25 000 RPM
Working Pressure: 0.63 MPA (6.3 Bar)
Overall Length: 157 mm
Air Inlet: 1/4"
Avg.Air Consumption: 3cfm(85.5I/min)
Air Hose: 3/8"ID
Net Weight: 0.35Kg
Grinder Cap: 6 mm (1/4")
1/4" Professional High Speed Air Die Grinder, AP17314
1/4" Professional High Speed Air Die Grinder, AP17314
Description:
Great for high-speed sanding, polishing and cleaning using a variety of abrasive tools attached to the machine shaft.
Housing made of light composite material.
Ergonomic design suitable for one-hand operation
Protective trigger preventing accidental machine start-up.
Rear exhaust.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Technical Parameters:
Chuck size: 6 mm (1/4") and 3 mm (1/8”)
Free Speed: 22 000 RPM
Working Pressure: 0.63 MPA (6.3 Bar)
Air Inlet: 1/4"
Air Hose: 3/8"ID
Avg.Air Consumption: 4.5 cfm (128.2 I/min)
Net Weight: 0.54 Kg
Overall Length: 180 mm
1/4"(6mm) Air Angle Die Grinder, RP27315
Features:
Angle head provides easy access into tight space.
Ideal for grinding, edge-breaking, deburring, porting and polishing.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Specification:
Grinder Cap: 6 mm (1/4")
Free Speed: 22 000 RPM
Working Pressure: 0.63 MPA (6.3 Bar)
Avg.Air Consumption: 3cfm(85.5I/min)
Air Inlet: 1/4"
Air Hose: 3/8"ID
Overall Length: 162 mm
Net Weight: 0.49 Kg
1/4" Professional High Speed Angle Die Grinder, AP17315
1/4" Professional High Speed Angle Die Grinder, AP17315
Great for high-speed sanding, polishing and cleaning using a variety of abrasive tools attached to the machine shaft. The angled head allows access to narrow, difficult-to-reach areas.
Made of light composite material.
Ergonomic design suitable for one-hand operation
Protective trigger preventing accidental machine start-up.
Rear exhaust.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Technical Parameters:
Chuck size: 6 mm (1/4") and 3 mm (1/8”)
Free Speed: 20 000 RPM
Working Pressure: 0.63 MPA (6.3 Bar)
Air Inlet: 1/4"
Air Hose: 3/8"ID
Avg.Air Consumption: 3 cfm (85.5 I/min)
Net Weight: 0. 45 Kg
Overall Length: 156 mm
1/4" Dr. Professional Air-powered ratchet wrench, 17414
1/4" Dr. Professional Air-powered ratchet wrench, 17414
Description:
Light-weight aluminum body.
Compact head design allows flexibility in tight area.
Forward/reverse lever located behind the ratchet head for quickly change of direction.
It's designed for removing and installing spark plugs and different engine parts,such as water pumper, radiators etc.
Front exhaust.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Technical Parameters:
Square drive: 1/4"
Capacity bolt size: 1/2" (12.5 mm)
Free speed: 160 rpm
Avg. Air Consumption: 240 л/мин. (8 cfm)
Working torque: 67.5 N.m
Air inlet: 1/4"
Air hose: 3/8"
Net weight: 0.6 kgs
1/2" Dr. Professional ratchet wrench, RP7412
1/2" Dr. Professional ratchet wrench, RP7412
Description:
Light-weight aluminum body.
Compact head design allows flexibility in tight area.
Forward/reverse lever located behind the ratchet head for quickly change of direction.
It's designed for removing and installing spark plugs and different engine parts,such as water pumper, radiators etc.
Front exhaust.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Technical Parameters:
Square drive; 1/2"
Capacity bolt size: 1/2" / 13mm
Free speed Rpm: 160
Working torque: 68 N.m
Air inlet: 1/4"
Air hose: 3/8"
Avg. Air Consumption: 77 л/мин. (2.7 cfm)
Overal Length: 254 mm (10”)
Net weight: 1.200 kgs
5" (125 mm) Air angle sander, AP7326
5" (125 mm) Air angle sander, AP7326
Features:
Professional sander with unique ergonomic design.
Low vibration for swirl-free finish.
Built-in regulator for positive speed control.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Specification:
Sading Pad: 5"
Free Speed: 10000 RPM
Air Inlet (NPT): 1/4"
Air Hose(ID): 3/8"
Avg. Air consumption: 5 cfm (141.7 l/min)
Sug. Air Comp: 2HP
Net Weight: 1.800 kg
1/8" High speed Micro air die grinder set, RP7819
1/8" High speed Micro air die grinder set, RP7819
Designed for grinding, polishing, smoothing using different types of abrasive tools attached to the machine shaft.
Ergonomic and compact, one-handed.
Ideal for precise grinding and polishing.
Allows access to narrow, hard-to-reach workspaces.
Contents: 1pc Micro Air Grinder, Mini Oiler, Oil Pot, 2pcs Hand Wrenches, Quick connect coupling 1/4”Female thread, 10pcs Mounted Stones
Technical data:
Free speed: 54000 rpm.
Chuck size: 3 mm (1/8 ")
Air consumption: 2 cfm (57 l / min)
Working pressure: 6.2 bar
Air Inlet: 1/4 "
Air Hose Size: 3/8 "(Inside Diameter)
Weight: 0.330 kg.
Made in China