AUTOMOTIVE SPECIALTY TOOLS

9 PCS Cap Oil Filter Wrench Set, 50641

Contents:
3/8”Dr. 27mm, 6PT.
3/8”Dr. 32mm, 6PT.
3/8”Dr. 36mm, 6PT.
3/8”Dr. 64.5mm, 14 flutes.

3/8”Dr. 88.8mm, 15 flutes.
3/8”Dr. 74.2mm, 14 flutes.
3/8”Dr. 86.6mm, 16 flutes.
63 to 83mm Аdjustable wrench.

Made in China

M9X1.25 Brake Thread Repair Tool Kit, 50400

The repair kit for brake shoe threads is equipped with reinforced drills and ten thread inserts suitable for VAG (Volkswagen, Audi), Opel / Vauxhall, Ford.
Contents:
10pcs Thread inserts
Drill bits
Taps
Tiles (VAG, Opel, Ford)
Hexagon spanner

Made in China

BMW M52TU/M54/M56 - Crankshaft Pulley Holding Tool, 50296

Features: For BMW 6 Cylinder Engine M52TU / M54 / M56
Tool is designed to hold the crankshaft pulley stationary while loosening or tightening the center screw.
It can safely remove the pulley and won't damage the pulley shock - proof function.

Application: BMW (M52, M54, M56).

Made in China

Spark Plug Thread Repair Kit, 50261

Comprehensive and time saving kit of spark plug thread repair tools.
Especially suitable for the repair of deep -seated plug configurations.
Incorporates taper and plug taps together with integrated ream.
Stepped tap ensures correct alignment of cutter in existing spark plug hole.
Extension tools allow easy access to the bottom of the plug recess.
Includes set of plug inserts.

Made in China

Hydraulic Drive Shaft Remover/Press Set, 50127

Used to press drive shafts out of wheel hubs.
For 4 or 5 bolt hubs with the centerline of the bolts mounted in a 98-125 mm diameter circle.
Especially for glued and rusty drive shafts.
Has a 10 ton capacity.

Applicable: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen and more.

Made in China

Mercedes-Benz OM654 - Engine Timing Tool Set, 51106

Applicable: A Class (from 2019), B Class (from 2019), C Class (from 2018), CLA (from 2019), CLS (from 2018), E Class (from 2016), GLB (from 2019), GLC Coupe (from 2019), GLE (from 2019), V Class (from 2019) and Vito (from 2019).

Engine codes: 1.6L 654.916 and 2.0L 654.920.

OEM No.: W654 589 00 40 00, W654 589 01 40 00 and W654 589 00 21 00.

Made in China

10 pcs Motorcycle Flywheel Puller Set, 60023

A set of flywheel pullers used for separating the flywheel from the crankshaft taper.
Contents:
5 double ended pullers with sizes:
M28 x M26 (1.0 mm thread),
 M25 (1.25 mm) x M22 (1.0 mm),
M27 x M24 (LH) (1.0 mm),
M26 x M22 (1.5 mm),
M27 (1.25 mm) x M20 (1.0 mm)
2 single ended puller:
M28 x 1.5 mm,
M19 x 1.0 mm
Threaded bolts: M14 x 1.5 mm, M16 x 1.5 mm, M18 x 1.5 mm

Made in China

Injector Seat and Shaft Cleaning Tool Kit, 50883

It contains a set of tools that ensure effective cleaning of the injector hole and the surface of the bed before inserting the new nozzle. It is used in a wide range of vehicles.
Suitable for Fiat Citroen BMW Peugeot Renault and Mercedes-Benz
Includes:
4 pcs cleaning brushes, brush holder, 3 pcs injector seat mill, cutter guide, sealing ring puller, brush holder extension injector seat and shaft cleaning kit, Note: only use brushes clockwise.
3 pcs conical sleeves for the guide pin 17 / 18.4 / 19 mm.
Guide bolts for sealing seat mills with 19 mm external hexagon head.
3 pcs milling heads:
15 x 19 mm diameter - Mercedes CDI
17 x 17 mm diameter - BMW, Peugeot, Citroen, Renault for Delphi / Bosch injectors
17 x 17 mm diameter 30° bevelled -  Fiat and Iveco sealing ring extractor.
Joint shaft with 6.3 mm (1/4 inch) hex bit holder for drill holders, for brushes with 6.3 mm (1/4 inch) hex bit holder.
2pcs  brush heads with 19.5 mm diameter, 2 pcs long, thin brushes for nozzle needle shaft.
6 pcs guide plugs for closing the nozzle needle shaft with holder for removal and installation.

Made in China

VAG DSG 0AM - Assembly Lever and Guide Pins, 50796

Features: Used to operate the engaging lever when removing and installing the mechatronic unit on 7-speed dual clutch gearbox DSG 0AM.
The guide pins ensure straight mounting of the mechatronic unit.
Applications:
Audi: A1 (2010-2018), A3 (2003-2012), TT (2006-2015)
Seat: Altea (2004-2015), Ibiza (2008-2017), Leon (2005-2012), Toledo (2004-2009)
Skoda: Fabia (2007-2014), Octavia (2004-2013), Rapid (2012-2020), Roomster (2006-2015), Superb (2008-2015), Yeti (2009-2017)
Volkswagen: Caddy (2004-2020), Golf Plus (2005-2014), Golf V (2003-2009), Golf VI (2008-2012), Jetta III (2005-2011), Jetta IV (2011-), New Beetle (2011-2019), Passat (2005-2010), Passat (2010-2014), Polo (2009-2017), Scirocco (2008-2014), Touran (2003-2010), Touran (2010-2015)

OEM#: T10407, T10406

Made in China

Mercedes-Benz Ignition Lock Removal Tool, 50765

Features: Designed to remove and replace ignition switch trim ring.
Applicable: Mercedes-Benz W129, W140, W202, W210, W220, W203, W209, W211, W204

Made in China

VAG - Turbo Actuator Adjustment Set, 50751

This tool set is designed for the professional loosening, adjustment and tightening of the control rod when removing/installing the pressure capsule along with the charge pressure actuator position sensor on VAG 2.0L Common Rail Diesel engines.
Application:
Golf Ml V1 (2008 - 2013), Golf Plus (2004 - 2015), Jetta (2004 - 2010), Passat (2005 - 2010), Passat CC (2008 - 2012), Scirocco (2008 - 2017), EOS (2006 - 2015), Tiguan (2007 - 2018), Transporter T5 (from 2009).
Set contains:
1 Pc 1/4" Dr. Socket 10mm, OEM T10422
1 Pc 12pt Spanner 10 x12mm, OEM T10423

Made in China

Diesel injector sealing ring puller, 50566

Features: Slide hammer action easily removes diesel injector copper ring seals
Tapered point screws into the seal, locking it to the tool
Hammer action extracts the copper ring seal even when there is carbon build up
Extracts the sealing rings from between the injector nozzle & the cylinder head without damaging the injector recess or head.
It's designed to remove of sealing rings with internal diameter 4 to 16 mm
Applicable: Ideal for Mercedes & many other diesel engines that use copper injector ring seals

Made in China

9pcs Pick and Hook Set, 50208

Features:
Suitable for pin/clip picking, hose removal and gasket scraping.
Ergonomically styled handles for comfort, grip and accuracy.
Lengths: 165mm and 260mm
Contents:
4 x Short Picks with satin finished steel shafts
4 x Large Picks with black finished steel shafts.
1 x Large Scraper with black finished steel shaft.
Material: Alloy Steel

Made in China

Pneumatic Air Pressure Bleeder Kit, 50121

Features: For professional grade brake and clutch bleeding performance.
Low pressure tank (20-40psi) can be pre-charged with compressed air, making the unit fully portable.
Suitable for use on ABS systems.
Supplied with a range of cylinder adapters for European, Japanese and US vehicles.
Tank Capacity: 5l
Air Inlet: 1/4"

Made in China

6 Pcs Spiral Flute Screw Extractor Set, 50051A

Used to remove broken screws, bolts and studs.
Material: Cr-Mo
Contents:
M3-M6 (1/8"-1/4")
M6-M8 (1/4"-5/16")
M8-M11 (5/16"-7/16")
M11-M14 (7/16"-9/16")
M14-M18 (9/16"-3/4")
M18-M25 (3/4"-1")

Made in China