AUTOMOTIVE SPECIALTY TOOLS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
6 Pcs Broken Screw Extractor Set, 50051
6 Pcs Broken Screw Extractor Set, 50051
Used to remove broken screws, bolts and studs.
Material: Cr-Mo
Contents:
M3-M6 (1/8"-1/4")
M6-M8 (1/4"-5/16")
M8-M11 (5/16"-7/16")
M11-M14 (7/16"-9/16")
M14-M18 (9/16"-3/4")
M18-M25 (3/4"-1")
Made in China
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Designed for the removal of the seized injectors from the cylinder head.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
1/2"Dr. 22mm Oxygen Sensor Socket, 51082
1/2"Dr. 22mm Oxygen Sensor Socket, 51082
Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 22mm
Made in China
1/2"Dr. 19mm Oxygen Sensor Socket, 51081
1/2"Dr. 19mm Oxygen Sensor Socket, 51081
Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 19mm
Made in China
1/2"Dr. 17mm Oxygen Sensor Socket, 51080
1/2"Dr. 17mm Oxygen Sensor Socket, 51080
Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 17mm
Made in China
BMW Drive Shaft and Differential Flange Nut Tool Set, 51019
BMW Drive Shaft and Differential Flange Nut Tool Set, 51019
Features:
For removing and installing of the drive shaft nut allows inserting of the rear differential pinon seal suitable for BMW vehicles with rear and four wheel drive.
Suitable for BMW E70, E90, E91, E92 with N54 B30 engine.
Contents:
Open end spanner 50 mm - OEM # 33 5 040 – For BMW E70, E88, E90, E91, E92
Flange holding tool - OEM# 23 0 020 – For BMW E70, E82, E88, E90, E91, E92, etc.
Multi-point ring spanner 65 mm – OEM# 33 5 050 – For BMW E70, E82, E90, E91, E92, E93
Multi-point socket 34T – OEM# 3 35 060 – For BMW E70, E82, E90, E91, E92, E93
Seal ring drift – OEM# 3 35 080 - For BMW differential: HAG 215 Sp, HAG 220kom, HAG 225kom, HAG type G
OEM#: 33 5 040, 33 5 050, 33 5 060, 33 5 080, 23 0 020
Made in China
BPW Rear Hub Cap Socket 111mm, 51017
BPW Rear Hub Cap Socket 111mm, 51017
Features: Oval shape socket with two flats on the side to suit BPW rear axle hub retaining cap nuts found on later model Japanese commercial trucks, tractors and automotive equipment.
Applications: BPW 12 tons.
Use with 41mm spanner or socket.
Size: 111mm (Oval) across the flats.
Made in China
Scania Rear Axle Nut Socket 100mm, 51016
Scania Rear Axle Nut Socket 100mm, 51016
Features:
Used to remove and install the rear axle nut on Scania trucks.
Size: 3/4" Drive x 100mm (8-point)
Made in China
HGV Diesel Injection Nozzle Socket, 50825
HGV Diesel Injection Nozzle Socket, 50825
Features:
Used to install and remove the diesel injection nozzle on MAN, Mercedes-Benz and Scania commercial vehicles.
Specially designed with window, toothed end and M14x1.5 pulling force screw.
Applicable: Mercedes-Benz CRD, MAN & Scania
Made in China
Earless-Type CV Boot Hose Clamp Pliers, 50696
Earless-Type CV Boot Hose Clamp Pliers, 50696
Made of carbon steel, reliable and extremely stable.
Light weight, easy to use.
Compression joint with central pushing function.
Designed for torsion wrench, comfortable grip.
Material: Carbon steel
Length: 21.7cm
Weight: 344g
Application: Suitable for all earless type CV boot clamps.
Made in China
4 Pcs Pry Bar Set With Hammer Cap, 50249
4 Pcs Pry Bar Set With Hammer Cap, 50249
Drop forged, heat treated and black oxide.
Size: 200mm (8"), 300mm (12"), 450mm (18"), 600mm (24").
Made in China
1/2" Dr. Profession Ratchet Handle, 317-А4006
1/2" Dr. Profession Ratchet Handle, 317-А4006
72 teeth
With quick release
Made in Taiwan
Piston Ring Compressor 60-175 mm, 50091
Piston Ring Compressor 60-175 mm, 50091
With Safety valve Special spring steel
Ratchet type complete with hex spanner
Capacity: 60-175mm
Height: 150mm (6")
Made in China
Ford, Volvo - Trailing Arm Bush Tool, 50968
Ford, Volvo - Trailing Arm Bush Tool, 50968
Designed for the removal and installation of the rear trailing arm mounting bushes on Ford vehicles.
Also suitable for some Volvo vehicles that share the same Ford platform.
The bush can be replaced without removing the trailing arm from the vehicle.
Applications:
Ford: Mondeo MK4 (2007-), S-Max ( 2006-), Galaxy (2006-)
Volvo: S60, S80, XC60, V70, XC70 (2006-)
Made in China
52 Pcs Paintless Dent Repair Kit, 51044
52 Pcs Paintless Dent Repair Kit, 51044
Used to removesmall deents quickly and easily without expensive paintwork.
Set conteins:
1pc Clue gun
1pc Slide Hammer
1pc Dent puller
1pc Plastic Scraper
1pc Spray Bottle
10pcs Glue sticks
37pcs Glue Tabs
Made in China
