AUTOMOTIVE SPECIALTY TOOLS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
4" (102 mm) Replacement stone, 50724
4" (102 mm) Replacement stone, 50724
Size: 4" (102 mm)
3 pcs set, for Standard engine cylinder hone 50724
Made in China
Brake & Fuel Pipe Fluid Lock Set, 50708
Brake & Fuel Pipe Fluid Lock Set, 50708
A tool kit for sealing metal brake pipes.
Suitable for clamping and sealing metal flared pipes on brakingsystems, cooling system bypass fuel pipes, AC pipes etc.
3 pcs anodised Aluminium bodies with composite screw.
Sizes: 4.2mm to 10mm.
Made in China
6 Pcs Pipe Threading Kit, 50706
6 Pcs Pipe Threading Kit, 50706
This wrench is built to make job much simpler. Really save your time and energy while working. Use this professional ratcheting pipe threader to put a clean thread on your pipes. The thread in the plate head is tidy, which is not easy to skid.
Ergonomic handle design.
Made of malleable cast iron, which is durable and wearproof for long time use.
Suitable for iron, stainless steel, black gas & galvanised iron pipe
Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4"
Made in China
5 pcs 1/2" Drive Extra Long Twist Socket Set, 50701
5 pcs 1/2" Drive Extra Long Twist Socket Set, 50701
The set contains extended extractors of 1/2 "Dr., with special design.
Contains:
Extra long twist sockets: 17 mm; 19 mm; 21 mm and 22 mm
Extension
Material: Cr-Mo
Sockets length: 150mm
Designed for unscrewing damaged, deformed or corroded nuts or bolts.
THE USE OF IMPACT WRENCH IS NOT RECOMMENDED!
Made in China
Clutch Alignment Mandrels, 50681
Clutch Alignment Mandrels, 50681
Suitable for cars and light commercial vehicles.
Fast hub diameter adjustment achieved via screw action.
Adjustable from 15-19mm and 20-26mm diameter.
Made in China
Air Conditioning Compressor Clutch Puller Set, 50677
Air Conditioning Compressor Clutch Puller Set, 50677
Features:
Professional A/C Compressor Clutch Remover Kit.
Replaces clutches found on FS6, C171, 6P & 148 compressors GM R4 & A6, HR-6, DA-6 & V5 A/C compressors.
Sanden compressors SD505, 507, 510, 575, 708 & 709.
2 & 3 hole puller plate fits most clutches, mechanical force does the pulling.
Made in China
60 - 80mm Reversible Oil Filter Wrench, 50666
60 - 80mm Reversible Oil Filter Wrench, 50666
Features:
2 jaws with teeth provide a strong grip and are not easy to slide. The wrench can hold half of the filter for greater grip and reduce the risk of sliding if the filter is stubborn or damaged.
Reduce time-consuming disassembly and stubborn filter disassembly. Spring-loaded for easy installation and disassembly.
Is used with half bending rod or ratchet wrench.
Rigid high carbon steel with a spring that has strong elasticity and is durable..
Specification:
Special design allows the oil filter to be removed and installed quickly and easily.
Steel jaws securely grip oil filter without slipping.
Fits sizes 60mm - 80mm.
Use with 1/2" drive.
Reversible.
Made in China
Oil Drain Plug Key-Repair Tool, 50500
Oil Drain Plug Key-Repair Tool, 50500
Suitable for sump plugs on engine, gearbox and back axle.
Work with 3/8" Dr. Ratchet handle or open end spanner 19mm Contents:
Hex head: 3/8", 8mm, 9mm, 10mm, 12mm, 14mm, 17mm
Square head: 5/16", 3/8", 11mm, 13mm
3/8" Drive sliding T bar
Material: Cr-V
Made in China
10 pcs Car Clutch Alignment Tool Set, 50636
10 pcs Car Clutch Alignment Tool Set, 50636
The set includes 8 centering pieces for insertion into the crankshaft bearing and a conically turned sleeve for receiving the clutch disc.
Features:
Faster, easier replacement of clutches.
Align clutch plates and pilotbearings accurately.
Centering shaft with clutch plate adaptor.
Adapter fits through clutch plate and into pilot bushing or bearing.
Electroplated for corrosion resistance, long lasting and durable construction.
For quick centering of the clutch disc on vehicles with pilot bearings.
Ensures a clean placement of the gearbox
Prevents unbalance of the coupling due to staggered installation.
Suitable for Audi, Citroen, Fiat, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Seat, Skoda, Subaru, Toyota, Vauxhall
Weight: 830g
Made in China
17 pcs Master Front Wheel Drive Bearing Service Kit, 50405
17 pcs Master Front Wheel Drive Bearing Service Kit, 50405
Comprehensive set for the removal and installation of front hub bearings
Without the need to dismantle the steering assembly.
Heavy Duty Steel Drifts
Hub Screws - M12 x 1.5 and M14 x 1.5mm
Drift sizes - 55.5.59.62.65.66.71.5.73.78.84.86.91mm
Suitable for most front wheel drive cars and vans.
Made in China
Clutch Alignment Tools, 50362
Clutch Alignment Tools, 50362
Professional clutch alignment set.
Contents spigot adaptors: Ø 10.6 to 20mm, guide sleeves: Ø 13.7 to 26mm
For fast accurate alignment of pilot hole flywheels and clutch plate when assembling to car.
Facilitates the alignment of clutch for assembly, while vehicle maintenance.
Precision manufactured steel bushes with chemically blackened steel finish.
Application: Audi, Citroen, FIAT, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Toyota, Vauxhall, VW, Volvo.
Made in China
Step Drill 9x 5.5mm for Glow Plug Removal set, 50339-2
Step Drill 9x 5.5mm for Glow Plug Removal set, 50339-2
Size: 9x5.5mm
Material: HSS (High Speed Steel)
Made in China
Step Drill 7 x 5.5mm for Glow Plug Removal set, 50339-1
Step Drill 7 x 5.5mm for Glow Plug Removal set, 50339-1
Size: 7x5.5mm
Material: HSS (High Speed Steel)
Made in China
Universal Timing Pulley Puller 30mm & 50mm, 50248
Universal Timing Pulley Puller 30mm & 50mm, 50248
For removing 3, 6, 9 slots pulleys and camshaft sprockets without causing any damage.
The tool is adaptable to different pulley diameters, as the legs are adjustable.
Surface finish: chrome plated, screw blackened.
Spindle size: M14x1.5mm, hex 19 mm
Working range(diameter): 42 - 82 mm
Contains:
1 pc regulator
1 pc bracket
1 pc spindle
3 pcs hooks, 30mm
3 pcs hooks(extended), 50mm
3 pcs locking nuts
3 pcs screw M8x1.25, L50
3 pcs screw M10x1.5, L50
Made in China
Telescopic Inspection Mirror, 50238
Telescopic Inspection Mirror, 50238
Extends to a maximum length of 598 mm
Mirror diameter: 50 mm.
Length: min. 282 – max. 598 mm
Made in China