AUTOMOTIVE SPECIALTY TOOLS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
Oil Measuring Jug - 5 L, 50225-5
Oil Measuring Jug - 5 L, 50225-5
This oil measuring jug is resistant to oil, fuel and most acids.
Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages.
Complete with flexible spout.
Material: High-density polyethylene.
Capacity: 5 l
Made in China
Oil Measuring Jug - 3 L, 50225-3
Oil Measuring Jug - 3 L, 50225-3
This oil measuring jug is resistant to oil, fuel and most acids.
Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages.
Complete with flexible spout.
Material: High-density polyethylene.
Capacity: 3 l
Made in China
Oil Measuring Jug - 1 L, 50225-1
Oil Measuring Jug - 1 L, 50225-1
This oil measuring jug is resistant to oil, fuel and most acids.
Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages.
Complete with flexible spout.
Material: High-density polyethylene.
Capacity: 1 l
Made in China
LED Telescopic Magnetic Pickup Tool, 50213
LED Telescopic Magnetic Pickup Tool, 50213
This tool is great for finding those metal nuts, bolts, screws and other metal pieces that have found their way into areas otherwise inaccessible to hands and eyes. This magnetic pick-up tool is a brilliant item to have on hand in the home, garage, yard and office.
The small LED on the telescope magnet makes it light enough to re-locate and release fallen screws.
The lamp makes good light.
Assistance when picking up metal parts up to 2.2 lb/1 kg!
Adjustable Length: min. 189 – max. 790mm
Magnet Diameter: 16mm
Made in China
Flex Magnetic Pickup Tool With LED Light, 50212
Flex Magnetic Pickup Tool With LED Light, 50212
Magnetic ends for picking up steel and iron objects
The magnetic ends with LED
Flexible shaft fitted with high quality strong magnets to holds shapes and retrieves in hard to reach spaces and around Obstructions.
The handles fit perfectly in the hand providing comfort and control.
Length: 519 mm
Magnet Diameter: 9 mm
Capacity: about 1 kgs
Made in China
8 Pcs Comprehensive Wiper-Arm Puller Set, 50135
8 Pcs Comprehensive Wiper-Arm Puller Set, 50135
6 Grippers
Slide Hammer Pressure Spindle
Universal puller set to remove bolted windscreen wiper arms especially for those which have become rusted or corroded onto the drive-shaft
This set will easily remove stubborn and deep-seated Wiper Arms
Integrated Screen-Wash nozzles on the rear windows can be easily removed by using the Slide hammer
Wiper Arms with central holes may be removed by using the Pressure Spindle
Wiper Arms with no central hole require the Pressure
Bolt to be used with the Pressure Adaptor supplied
Applicable: VW-Audi, BMW, Ford, Mercedes, Opel, Peugeot ect.
Made in China
10 pcs BMW Locking Wheel Nut Key Set, 50102
10 pcs BMW Locking Wheel Nut Key Set, 50102
Master set for BMW vehicles
Tamper Proof type
Use with a 17mm socket
Sizes:
#11/5 point
#12/14 point
#13/16 point
#14/12 point
#15/11 point
#16/10 point
#17/7 point
#18/13 point
#19/8 point
#20/9 point
Made in China
7 PCS Drive Shaft Puller Extractor Set, 50046
7 PCS Drive Shaft Puller Extractor Set, 50046
Use for drive shaft on BMW, VW, Mercedes, SUBARU
230mm Long Puller With 120mm Housing
Include adapters:
M16 x 1.5 for Subaru;
M20 x 1.5 for Volkswagen Beetle, Touareg & Porsche Cayenne.
M22 x 1.5 for BMW E30.
M24 x 1.5 for BMW E36 & Mercedes-Benz W203.
M27 x 1.5 for BMW E32, E34, E38, E39, X5.
M30 x 1.5 for BMW E32, E36, E34
Made in China
21 PCS Master Adaptor Set Ball Joint Service Kit, 50042
21 PCS Master Adaptor Set Ball Joint Service Kit, 50042
With 4 Wheel Drive Adaptors
Brake Anchor Pin Removal and Installation
This tool kit is designed for use on all cars and
Light trucks that have press-fit type ball joints
Without the need to remove the control arm from the vehicle
Contents:
C-Frame and Forcing Screw
Installation Adaptor
Removal Adaptor
Installation Cups
Removal Cups
Receiving Tubes
For servicing universal joints on most cars / vans and light trucks
Description:
Includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles. Comes with blow molded carrying case, making it easier to keep the tools organized and easy to transport.
Features:
Solid carbon-steel construction with anti-rust coating for ultimate endurance through years of heavy use.
Designed to easily remove and replace press-fit upper and lower ball joints with receiver tubes and adapters for most full-size GM, Ford, and Dodge vehicles.
Includes all receiver tubes and removing/installing adapters for press-fit upper and lower ball joint service.
The forged C-frame press makes it easier to remove and replace universal joints when stacking with numerous cups and receivers.
The tool case with pre-sized slots for each component keeps your tools securely organized and extends their service life.
Made in China
3 pcs 1/2" Dr. Rim Protective wheel socket set, C4031
3 pcs 1/2" Dr. Rim Protective wheel socket set, C4031
Suitable for both manual and impact wrenches.
With plastic coating to protect aluminum rims.
Material: Cr-Mo
Overal length: 87 mm
Size: 17 mm, 19 mm, 21 mm
Made in Taiwan
SCANIA - 80mm 8-pt. Front Hub Nut Socket, TP9T1422
SCANIA - 80mm 8-pt. Front Hub Nut Socket, TP9T1422
Description:
This eight sided 80mm socket is designed for the removal of front hub nut found on Scania trucks.
Lenght: 104 mm
Innerdiameter: 80 mm
Outerdiameter: 100 mm
Driven by 41mm Hex
Weight: 1800 gr
Made in Taiwan
64.5mmx14-pt Oil Filter Cap Wrench For Toyota, EN631BО
64.5mmx14-pt Oil Filter Cap Wrench For Toyota, EN631BО
Description:
Oil filter wrench provides maximum torque with multiple contact points and won't break or damage fragile Toyota plastic filter cartridges.
Designed for maximum torque
High strength forged alloy, Sand blasted non-slip finish
4. 24mm x 64.5 mm with 14-pt for a snug no-play, no-slip fit
Size 64.5mm - Number of flutes 14 - Drive - 3/8"
Material: aluminium black
Applicable:
Most of Toyota 4 Cylinder (1800CC - 2000CC)
Special designed for plastic oil filter cap of TOYOTA
Suitable for Toyota - Allion, Auris, Corolla axio, Corolla fielder, Corolla rumion,Isis ist, Noah, Premio, Prius, Voxy, Wish
Toyota:
2005-2008 Avalon
2009-2015 Corolla
1990-2015 Camry 4 cyl, V6 (2007-2008)
2001-2008 Highlander 4 cyl,V6 (2008)
2009-2015 Matrix
2007-2015 Prius
2010-2015 Rav4
2007-2014 Sienna
2007-2008 Tundra
Made in Taiwan
110-160mm Piston ring pliers, EN62302
110-160mm Piston ring pliers, EN62302
Length: 190 mm
Capacity: 110-160
To replace segments without tearing or deformation.
Applicable to trucks.
It has a smooth fastening edge to prevent deformation.
Made in Taiwan
Chain oil filter wrench 1/2"Dr., EN61901
Chain oil filter wrench 1/2"Dr., EN61901
Suitable for removing oil filters up to 120mm in diameter, simply locate the chain around the oil filter and it tightens to fit the diameter.
This tool is designed to be used with a 1/2 drive ratchet or 21 mm spanner.
Made in Taiwan
1/2" Dr. Wheel Nut Socket for Mercedes-Benz, 17mm, BR6T020
1/2" Dr. Wheel Nut Socket for Mercedes-Benz, 17mm, BR6T020
Features: For safe and effective removal of the Convex ("flower head") wheel bolts on late Mercedes models.
With plastic cover for perfect protection of aluminium rims.
Made from Cr-Mo steel.
Size: 17mm, 85mm long.
Application: Mercedes-Benz C-Class / GLK (W204), E-Class (W211, W212, W207), SLK (W172), M-Class (W164, W166), CL-Class (W216), S-Class (W221, W222) and Maybach.
Made in China