Crankshaft Turning Tool, 50535

Used for turning the crankshaft pulley.
With 1/2" drive, 22mm square, and 12mm rotating pivot pin.
Application:
Audi A6 2005 and up
Audi A8 2003 and up
Engine: 6 cylinder 2.4, 3.2L FSI.
OEM №: T40058

Made in China

VAG crankshaft Pulley/Damper Puller, 50506

This removal tool must always be used to separate the vibration damper from the gear wheel of the crankshaft. Working on 4 cylinder common 2.0L, required for the damage free removal of the vibration damper with internal thread.
Applications:
Volkswagen T6/Transporter (from 2017).
Engine: 4 cylinder common rail 2.0L.
OEM №: T50071.

Made in China

VAG 1.2/1.4TFSI Timing Tools, 50169

Timing chain wear measuring kit for the latest VAG 1.2 & 1.4 TFSi chain drive petrol engines.
Allows the timing chain wear to be accurately measured with the minimum amount of dismantling.
If the angle reading shown exceeds that of the manufacturer’s angular measurement then the camshaft drive chain and associated components must be replaced.
Applicable:
Audi: A1 (2012-2015), A1 Sportback (2012-2015), A3 (2013-2015), A3 Sportback (2012-2015)
Seat: Ibiza (2012-2017), Leon (2012-2015), Toledo (2012-2017)
Skoda: Fabia II (2010-2015), Fabia III (2014-2017), Octavia II (2010-2013), Octavia III (2010-2015), Praktik (2010-2015), Roomster (2010-2015), Rapid (2015-2017)
Volkswagen: Golf VII (2008-2015), Golf VII Estate (2008-2017), Jetta (2012-2018), Polo (2012-2018), Sportsvan (2014-2017)
Engine Codes:
1.2 TFSi: CJZA, CJZB, CJZC, CJZD
1.4 TFSi: CGGA, CGGB, CHPA, CMBA, CPVA, CPVB, CRJA, CXSA
1.4 TFSi ACT: CPTA

OEM: T10550

Made in China

VAG (4.0 TFSI) - Timing Tool Set, 50956

Use for correct the camshaft and crankshaft timing position. Use to lock the camshaft in the timed position when the engine repair or the rebuild requiring the cam pulley to be removed and timed. For locking the camshaft in the position to allow the variable valve timing pulley to be removed.

The kit covers later duratec petrol engine, it includes revised design camshaft setting plate and tensioner pulley locking pin.

Contents:

Tensioner Pulley Locking Pin

Crankshaft Locking Tool

Camshaft Sprocket Locking Tool

Flywheel Timing Pin

Camshaft/Crankshaft Pin

Application:

Audi A8 2010>, Audi A6 2011>8-cyl. 4.0L, 4V TFSI engines.

OEM №: T40264

Made in China

VAG 1.2, 1.4 TSI - Engine Timing Tool Kit, 50623
Two piece kit consisting of the components required to lock the crankshaft and camshafts in their timed positions to allow the removal and replacement of the camshaft timing belt.
Application for late 1.2 & 1.4 TSI 4-cylinder, petrol engines
Applicable:
Audi A1, A3, Q3 от 2012 from 2012 onwards
Engine code:
1,2 TFSI: CJZA, CYVB
1,4 TFSI: CHPB, CMBA, CPWA, CUKB, CVNA, CXSA, CXSB, CYVB, CZCA, CZCC, CZDA, CZDB
Volkswagen Golf VII, Passat, SV, Sportsvan, Polo, Jetta от 2012 from 2012 onwards

Engine code:
1,2 TSI: CJZA, CJZB, CJZC, CJZD, CYVA, CYVB, CYVD
1,4 TSI: CHPA, CMBA, CPVA, CPVB, CPWA, CRJA, CUKB, CUKC, CXSA, CZCA, CZDA, CZDB
Seat, Leon, Leon ST от 2012 from 2012 onwards
Engine code:
1,2 TFSI: CJZA, CJZB, CJZC, CJZD, CYVA, CYVB
1,4 TSI/TGI: CHPA, CMBA, CPWA, CXSA, CZCA, CZDA
Skoda Octavia III, Fabia III от 2012 from 2012 onwards
Engine code:
1,2 TSI: CJZA, CJZB, CJZC, CJZD, CYVA, CYVB
1,4 TSI: CHPA, CPWA, CZCA, CZDA

OEM №: T10494; T10340

Made in China

VAG 1.2/1.6 TDi и 2.0L TDI engines - Diesel injector remover, 011108019A

Applicable:
Volkswagen Golf 2009, Seat Ibiza 2008, Altera 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013.
Engines: 1.2L TDi CR 55Kw Diesel, 1.6L CRTD Diesel and 2.0LTDI Diesel.
OEM tools: T10402, T10415, T10055.
Use according to OEM instructions.
No solenoid removal is required.

Made in Taiwan

VW / Audi - Water-Pump Pulley Reaction Wrench, 50672

Features: For locking water-pump pulley, loosening of stubborn screws on the water-pump pulley.
Overal lenght: 300 mm
Applicable: VW, Audi

Made in China

VAG 1.8, 2.0 TSi/TFSi – Vibration Damper Holding tool, 50532

Content: OEM T10531/1
- Vibration damper holding tool OEM T10531/3
- Crankshaft sprocket holding tool adapter OEM T10531/2
- Crankshaft sprocket holding tool OEM T10531/4
- Crankshaft sprocket holding tool nut

Applicable:
Audi: A3/A3 Sportback (2007-2017), A3 Cabriolet (2008-2016), A3 Saloon (2013-2016), A4 (2007-2017), A4 Quattro (2008-2017), A4 Allroad (2013-2017), A5 (2015-2017), A5 Sportback (2009-2017), A5 Coupe (2007-2016), A5 Cabriolet (2008-2017), A6 (2012-2017), A6 Quattro (2015-2017), A7 (2014-2017), A8 (2012-2014), S1/S1 Sportback (2014-2017), S3/S3 Sportback(2013-2016), S3 Saloon (2013-2016), S3 Cabriolet (2014-2016), Q3 (2011-2017), Q5 (2009-2017), Q7 (2015-2017), TT (2008-2017)
Seat: Alhambra (2010-2017), Altea (2006-2015), Exeo (2010-2013), Ibiza (2015-2017), Leon (2007-2017), Leon ST (2013-2017), Toledo (2007-2009) Skoda: Octavia II (2007-2013), Octavia III (2013-2017), Superb II (2008-2015), Superb III (2015-2017), Yeti (2009-2015), Yeti Outdoor (2013-2015)
Volkswagen: Amarok (2010-2016), Beetle (2009-2016), CC (2012-2015), Eos (2008-2015), Golf V (2007-2008), Golf VI (2009-2017), Golf VII (2015-2017), Golf Alltrack (2014-2017), Golf VI Estate (2009-2017), Jetta (2008-2015), Passat (2007-2017), Passat CC (2008-2012), Passat Alltrack (2012-2017), Polo (2014-2017), Scirroco (2008-2017), Sharan (2011-2017), Tiguan (2007-2017), Touran (2014-2015), Transporter T5 (2011-2015), Transporter T6 (2015-2017)

Engine Codes:
1.8 TFSI: BZB, BYT, CABA, CABB, CABD, CDHA, CDHB, CJED, CJEE, CJSA
2.0 TFSI: CAWA, CAWB, CBFA, CCTA, CCZA, CCZC, CDAA, CDNC, CDND, CCZB, CCZD, CDAB, CDNB, CESA, CETA, CFKA, CFPA, CGYA, CHHA, CHHB, CJKA, CHHC, CHJA, CJKB, CJSB, CJSC, CJXA, CJXB, CJXC, CJXE, CJXG, CJXH, CNCB, CNCD, CNCE, CPLA, CPSA, CULA, CULB, CULC, CYNB, CYPA, CYRB, CYRC, CWZA, CYBB, CYGA, DAJA, DAJB, DEDA

Made in China

VAG 1.8/2.0L Balance shaft puller, 50176

For the safe removal of the balance shafts, fitted VAG 4-cylinder chain drive 1.8 and 2.0 injection engines.
Internal thread M8 x 1.25 for sliding hammer.
OEM tool: T10394
Applicable: VW, Audi, Seat, Skoda
VW:
VW Passat (2007-2017); VW Scirocco (2008-2017); VW Sharan (2011-2017); VW Tiguan (2007-2016); VW Beetle (2013-2017); VW CC (2012-2015); VW Eos (2008-2015); VW Polo (2014-2017); VW Touran (2015-2017); VW Golf (2007-2017); VW Jetta (2011-2014)
Audi:
Audi A1 (2015-2017); Audi A3 (2007-2017); Audi A4 (2007-2017); Audi A5 (2007-2017); Audi A6 (2012-2017); Audi A7 (2014-2017); Audi A8 (2012-2014); Audi Q3 (2011-2017); Audi Q5 (2008-2017); Audi TT (2008-2017); Audi Q7 (2015-2017); Audi S1 (2014-2017); Audi S3 (2013-2017)
Seat:
Seat Altea (2006-2015); Seat Exeo (2010-2013); Seat Ibiza (2015-2017); Seat Leon (2007-2017); Seat Toledo (2007-2017)
Skoda:
Skoda Octavia (2007-2017); Skoda Superb (2008-2017); Skoda Yeti (2009-2015)
Engine code:
1.8: BZB, CDAA, BPU, BYT, CABA, CABB, CDHA, CDHB, CABD, DAJB, CJSA, CJSB, CJEB, CJEE, CJED, CYGA, DAJA, CDAB, CJSC, CGYA
2.0: CAWB, CCZA, CBFA, CCTA, CDNB, CDNC, CFKA, CHJA, CCZC, CPSA, CESA, CETA, CNCD, CYRB, CYRC, CNCE, CYNB, CYPA, CYPB, CULB, CULC, CNCB, CWZA, CJXF, CJXC, CJXB, CJXG, CHHC, CCZD, CJKA, CJKB

Made in China

VW T5 Tuareg LT 2.5TDI -Water pump removal tool set, 50373

The water pump of the VW Transporter and the VW Touareg is driven by the gears that drive the engine.
The kit is used to remove the water pump and bring the engine to the top dead center (TDC position).
Application:
VW Transporter T5 (after 2004) 2.5 TDI (engine: AXE, AXD, BNZ)
VW Touareg (after 2003) 2.5 5-cylinder TDI engines (engine: BAC, BPE)
Engine Codes: AXD, AXE, BAC, BLJ, BLK, BNZ, BPC, BPD

OEM No. T10221; T10221A; T10222; T10222A; T10225; T10225A

Made in China

VAG Coolant Pump Thermostat Wrench, 50907

Features: To easy removal and installation of thermostat without causing any unnecessary damage.
Applicable: Audi A3 2013> , VW Golf 2013 >, Skoda Octavia 2013 >, Seat Leon 2013>
Engines: 1.0 TFSi 3-cyl, 1.2 TSi, 1.4 TFSi, 1.4 FSi, 1.4 TDiCR 3-cyl.
OEM Tool: T10508

Made in China

VAG Camshaft Gear Locking Tool - Camshaft sprocket locking tool, 50890

Features: For locking the camshaft in adjusting position required for checking and adjusting the engine timing
Applicable:
Seat Mii 1.0 (3 cylinder) - (from 2012)
Skoda Citigo 1.0 (3 cylinder) - (from 2011)
Volkswagen Up 1.0 (3 cylinder) - - (from 2011)
Engine code: 1.0 CHYA (44 kW), 1.0 CHYB (55 kW), 1.0 CPGA (50 kW)
OEM Tool: T1047

Made in China

VAG 1.8 /2.0L (EA888) FSI/TFSI – Engine timing tool set, 50832

Features: For Camshaft Locking tools for Audi VW SKODA VAG 1.8 2.0 TFSI EA888 SF0233.
Applications: VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, VW CC, VW Scirocco, VW Golf Mk6 GTI, VW Scirocco, VW Passat B6, VW CC
Use for correct the camshaft and crankshaft timing position.
Four-cylinder EA888 petrols: 1.8L R4 16v TSI/TFSI, 2.0L R4 16v TSI/TFSI, 2006~2013 VAG series TSI, TFSI EA888 engine(1.8L, 2.0L).
OEM Tools:
T10352, T10352/1, T10352/2, T10368, T40196, T10354, T10060A, T40011, T40265, T40267, T40271
1.8 R4 16v TSI/TFSI (EA888)
Applications:
Audi TT Mk2 (8J), Audi 8P A3, Audi B7 A4, Audi A4 (B8), Audi A5
SEAT Leon Mk2 (1P), SEAT Altea XL
Škoda Yeti, Škoda Octavia Mk2 (1Z, Ming Rui), Škoda Superb Mk2 (3T)
VW Jetta Mk5/Sagitar, VW Passat B6, VW Passat CC

2.0 R4 16v TSI/TFSI (EA888)

Applications:
VW Golf Mk5 GTI (North American markets only)
VW Golf Mk6 GTI (North American markets only)
VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, VW CC, VW Scirocco, VW Golf Mk6 GTI, VW Scirocco, VW Passat B6, VW CC
Audi A3 (8P), Audi A3 Cabriolet, Audi TT, Audi A4 (B8), Audi Q5, Audi A5, Audi Q5, Audi TT Mk2 (8J),  Audi Q3
Škoda Superb Mk2 (3T), Škoda Octavia
SEAT Altea Freetrack, SEAT Leon FR, SEAT Exeo

Engine Code:
BYT, BZB, CABA, CABB, CABD, CADA, CAEA, CAEB, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CDAA, CDAB, CDHA, CDHB, CDNB, CDNC, CDND, CESA, CETA, CFKA, CGYA, CJEB, CJBA, CJSB.

Contents:
T10352 – Camshaft Control valve removal tool
T10352/1 – Camshaft Control valve removal tool
T10352/2 – Camshaft Control valve removal tool
T10368 – Crankshaft Thrust piece
T40196 – Drift for camshaft slide pieces

T10354 – Pressure piece
T10060A – Auxiliary drive belt tensioner locking pin
T40011 – Tensioner locking pin

T40265 – Oil pump tensioner locking pin
T40267 – Timing chain tensioner
T40271 – Camshaft clamp (Exhaust & Inlet)

Made in China

VW 2.8L – Camshaft Locking Tool, 50950

Designed to lock the camshaft of the 2.8L diesel engines used in the popular Volkswagen LT van.
To check and adjust the valve time.
Applicable: Volkswagen LT Van 1997 to 2006 2.8lt.
Engine codes: AGK 1997 to 2006, ATA 1999 to 2006, AUH 2001 to 2006, BCQ 2002 to 2006.
OEM number 3445

Made in China

VAG 1.4 TFSI – Camshaft alignment tool set, 50427

For a new version of their 1.4 TFSi petrol engine. This new engine is equipped with CoD technology (Cylinder on Demand) which allows the engine to switch between 2 and 4 cylinder running modes to maximize efficiency.
Applicable: VAG 1.4 TFSi petrol engines with codes CPTA, CZEA (2012-2018)
Audi A1 / Sportback, A3 Convertible / Sedan, A3 / A3 Sportback, Q2, Q3; Seat Ateca, Ibiza, Leon / ST; Skoda Kodiaq, Superb; & Volkswagen Golf VII, Passat, Polo.
Contents:
Camshaft Positioning Tool - OEM number T10504
Short pin - OEM number T10504 / 1
Long stepped pin - OEM number T10504 / 2
Crankshaft locking pin - OEM number T10340.

Made in China