Products
Ø50 Thermoplastic rubber wheel, polypropylene centre, swivel bracket withstem 386201
Ø50mm Thermoplastic rubber wheel, polypropylene centre, swivel bracket withstem 386201
Wheel description
Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Swivel bracket with stem
Swivel bracket with stem. The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race, with dust protection granted by the particular plate configuration. The king pin is obtained by moulding and duly rivetted.
Wheel Diameter: 50 mm
Width: 18 mm
Overal Height: 66 mm
Stem size: M8 mm
Stem lenght: 15mm
Capacity: 40 kgs
Made in Italy
Thermoplastic rubber wheel, polypropylene centre, swivel bracket with bolt hole type with front lock, 387203
Thermoplastic rubber wheels, polypropylene centre, swivel bracket with bolt hole type with front lock, 387203
Wheel description
Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Swivel bracket with bolt hole and front lock
Swivel bracket with bolt hole. The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race, with dust protection granted by the particular plate configuration. The king pin is obtained by moulding and duly rivetted. The front brake is necessary to lock wheel and top plate rotation.
Wheel Diameter: 80 mm
Width: 24 mm
Overal Height: 104 mm
Plate diameter: 41 mm
Capacity: 75 kgs
Made in Italy
Thermoplastic rubber wheel, polypropylene centre, fixed bracket, 385203
Thermoplastic rubber wheel, polypropylene centre, fixed bracket, 385203
Wheel description
Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Fixed bracket
Fixed bracket. The fork is made of pressed steel zinc plated finish.
Wheel Diameter: 80 mm
Width: 24 mm
Overal Height: 104 mm
Plate size: 60x60 mm
Capacity: 75 kgs
Made in Italy
Ø80 Injection polyurethane wheel, polyamide 6 centre, swivel top plate bracket type NL, 604201
Injection polyurethane wheels, polyamide 6 centre, swivel top plate bracket type NL, 604201
Wheel description
Injection polyurethane tread, hardness 55 Shore D. Polyammide 6 centre.
Plain bearing bore or roller bearing bore
The plain bearing bore results from a? hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage.
Swivel top plate bracket type NL
Swivel top plate bracket type NL. The plate, the ball race ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection seal made of polyethilene. The king pin is integral with top plate and duly rivetted.
Wheel Diameter: 80 mm
Width: 30 mm
Overal Height: 107 mm
Plate size: 100x85
Capacity: 120 kgs
Made in Italy
Ø125 Standard rubber wheel, pressed steel discs, fixed bracket type NL, 535703
Standard rubber wheel, pressed steel discs, fixed bracket type NL, 535703
Tyre: black standard rubber, hardness 80 Shore A. Centre: electrolytically galvanised steel plate, made of two riveted discs.
Bush bearing bore or roller bearing bore
In the bush bearing bore, the hub contains a bush made of polyamide 6 with molybdenum disulphide to make it self-lubricating. In the roller bearing bore, the bearing housing contains cylindrical roller bearings with polyamide 6 cage.
Fixed bracket type NL
Fixed bracket type NL. The fork is made of pressed steel zinc plated.
Wheel Diameter: 125 mm
Width: 37,5 mm
Overal Height: 156 mm
Plate size: 100x85 mm
Capacity: 130 kgs
Made in Italy
Ø100 Standard rubber wheels, pressed steel discs, fixed bracket type NL, 535702
Standard rubber wheels, pressed steel discs, fixed bracket type NL, 535702
Tyre: black standard rubber, hardness 80 Shore A. Centre: electrolytically galvanised steel plate, made of two riveted discs.
Bush bearing bore or roller bearing bore
In the bush bearing bore, the hub contains a bush made of polyamide 6 with molybdenum disulphide to make it self-lubricating. In the roller bearing bore, the bearing housing contains cylindrical roller bearings with polyamide 6 cage.
Fixed bracket type NL
Fixed bracket type NL. The fork is made of pressed steel zinc plated.
Wheel Diameter: 100 mm
Width: 30 mm
Overal Height: 128 mm
Plate size: 100x85
Capacity: 80 kgs
Made in Italy
Ø125 Standard rubber wheels, pressed steel discs, swivel top plate bracket type NL with front lock, 535403
Standard rubber wheels, pressed steel discs, swivel top plate bracket type NL with front lock, 535403
Tyre: black standard rubber, hardness 80 Shore A. Centre: electrolytically galvanised steel plate, made of two riveted discs.
Bush bearing bore or roller bearing bore
In the bush bearing bore, the hub contains a bush made of polyamide 6 with molybdenum disulphide to make it self-lubricating. In the roller bearing bore, the bearing housing contains cylindrical roller bearings with polyamide 6 cage.
Swivel top plate bracket type NL with front lock
Swivel top plate bracket type NL. The plate, the ball rice ring and the fork are of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection seal made of polyethilene. The king pin is integral with top plate and duly rivetted. The front brake is necessary to lock wheel and top plate rotation.
Wheel Diameter: 125 mm
Width: 37,5 mm
Overal Height: 156 mm
Plate size: 100x85 mm
Capacity: 130 kgs
Made in Italy
Ø100 Standard rubber wheels, pressed steel discs, swivel top plate bracket type NL with front lock, 535402
Standard rubber wheels, pressed steel discs, swivel top plate bracket type NL with front lock, 535402
Tyre: black standard rubber, hardness 80 Shore A. Centre: electrolytically galvanised steel plate, made of two riveted discs.
Bush bearing bore or roller bearing bore
In the bush bearing bore, the hub contains a bush made of polyamide 6 with molybdenum disulphide to make it self-lubricating. In the roller bearing bore, the bearing housing contains cylindrical roller bearings with polyamide 6 cage.
Swivel top plate bracket type NL with front lock
Swivel top plate bracket type NL. The plate, the ball rice ring and the fork are of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection seal made of polyethilene. The king pin is integral with top plate and duly rivetted. The front brake is necessary to lock wheel and top plate rotation.
Wheel Diameter: 100 mm
Width: 30 mm
Overal Height: 128 mm
Plate size: 100x85 mm
Capacity: 80 kgs
Made in Italy
Ø125 Standard rubber wheels, pressed steel discs, swivel top plate bracket type NL, 535003
Standard rubber wheels, pressed steel discs, swivel top plate bracket type NL, 535003
Tyre: black standard rubber, hardness 80 Shore A. Centre: electrolytically galvanised steel plate, made of two riveted discs.
Bush bearing bore or roller bearing bore
In the bush bearing bore, the hub contains a bush made of polyamide 6 with molybdenum disulphide to make it self-lubricating. In the roller bearing bore, the bearing housing contains cylindrical roller bearings with polyamide 6 cage.
Swivel top plate bracket type NL
Swivel top plate bracket type NL. The plate, the ball race ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection seal made of polyethilene. The king pin is integral with top plate and duly rivetted.
Wheel Diameter: 125 mm
Width: 37,5 mm
Overal Height: 156 mm
Plate size: 100x85 mm
Capacity: 130 kgs
Made in Italy
Standard rubber wheel, pressed steel discs, swivel top plate bracket type NL, 535002
Standard rubber wheel, pressed steel discs, swivel top plate bracket type NL, 535002
Wheel Diameter: 100 mm
Width: 30 mm
Overal Height: 128 mm
Plate size: 100x85 mm
Capacity: 80 kgs
Made in Italy
Ø200 Injection moulded TPR rubber wheel, polypropylene centre, 511106
Ø50 Thermoplastic rubber wheel, polypropylene centre, swivel bracket with stem with front lock, 389201
Thermoplastic rubber wheel, polypropylene centre, swivel bracket with stem with front lock, 389201
Wheel description
Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Swivel bracket with stem and front lock
Swivel bracket with stem. The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race, with dust protection granted by the particular plate configuration. The king pin is obtained by moulding and duly rivetted. The front bracke is necessary to lock wheel and top plate rotation.
Wheel Diameter: 50 mm
Width: 18 mm
Overal Height: 66 mm
Stem size: M8 mm
Stem lenght: 15mm
Capacity: 40 kgs
Made in Italy