fiat

Fiat Alfa Romeo Lancia 0.9 Twin Air Chain Drive - Engine Timing Tool Set , 50294

Designed to lock the cam and crankshaft in position to allow the removal and replacement of the timing chain fitted to the new low emission and high economy twin cylinder Fiat engine.
Note: Fiat state that after rebuild these engines should be placed on suitable electronic diagnostic software for the onboard electronic control systems to be reset.

Content:
Pulley Locking Pin
Flywheel Locking Pin
Camshaft Locking Plate
Balancing shaft adjustment tool
Applicable:
Alfa Romeo:MiTo（2012-2015）
Fiat: 500/500C（2010~), Panda（2012~), Punto（2012~)
Lancia: Ypsilon(2011~)
Engine code: 0.9 Twin Air Turbo: 312A2.000

OEM №: 2.000.035.300; 2.000.035.200; 2.000.035.100; 2.000.038.300

Made in China

Citroen/Peugeot/Fiat/Ford - Belt Tension Wrench, 50516

Facilitates the pre-tensioning and locking of V-ribbed belt tensioners.

For the removal / installation of the V-ribbed belt in - situ on the vehicle even in very limited space condition.

Suitable for Citroën / Peugeot / Fiat / Ford 1.4L and 1.6L diesel engines.

Applications include: Citroën, Peugeot, Ford & Fiat 1.4 & 1.6 diesel engines.

Citroën: Berlingo, C1, C2, C3, C3 Picasso, C3 Pluriel, C4, C4 Picasso, C5, DS3, DS4, Xsara & Xsara Picasso.

Peugeot: Partner III, 206, 207, 308, 508, 3008, 5008.

Engines covered include DV4 & DV6 engines.

Engines: 1.4-1.6D

OEM No.: 0188-Z , G.0194-E3

Made in China

Engine Timing Kit Fiat/ Alfa Romeo 1.4L, 50481

Features: To lock the camshaft and crankshaft in position to allow the removal and replacement of the timing belt fitted to the new generation 1.4 Fiat MultiAir engines.
Applicable:
Alfa Romeo:
MiTo    1.4 (105)               Engine code: 955A6.000
MiTo    1.4 (135)               Engine code: 955A2.000
Giulietta   1.4 (170)            Engine code: 940A2.000
Fiat:
Punto EVO   1.4 (105)      Engine code: 955A6.000
Punto EVO   1.4 (135)      Engine code: 955A2.000
Lancia:
Delta1.4                            Engine code: 955A7.000

OEM Tools No.: 2 000 035 100; 2 000 035 300; 2 00 035 200

Made in China

Timing tool set for FIAT 2.2; 2.3; 3.0 JTD and 22DT PSA engines, 50601
Used for belt timing as well as chain-driven engines, including later versions, for light commercial vehicles with 2.2; 2.3; 3.0 and PSA engines.
The set contents a water sensor installation socket, crankshaft turning tool, timing cover centring plate, oil pump setting plate as well as camshaft and crankshaft locking tools.
These engines are also found in the Ford Transit.
OEM Tools No:
Fiat / Iveco: 1.860.617.000/99360608, 2.000.016.500/99360614, 2.000.018.200/99360615
Citroen / Peugeot: 0191 / 2A, 0191 / 2B, 0198A, 0198B2, 0198D, 0198G
Ford: 303-698, 303-705 / 21-256
Applicable:
Citroen: Relay/Jumper III (06-12)
Fiat: Ducato (02-13)
Iveco: Daily (03-10), Daily/EcoDaily (09-11)
Пежо: Boxer III (06-12)
Also suitable for PSA engines:
  - Puma 22DT 4HV 100PS
  - Puma 22DT 4HV 120PS
  - F30DT
Engine code:
Citroen / Peugeot:
2.2D Hdi: 4HM, 4HM, 4HV
Fiat:
2.2D Multijet 100: 4HV
2.3D JTD: F1AE0481C
2.3D Multijet: F1AE0481D, F1AE0481N, F1AE3481E
3.0D Multijet: F1CE0481D, F1CE3481E, FCE13481M, F1CE3481N
Iveco:
2.3D: F1AE0481A, F1AE0481G, F1AE0481GA, F1AE0481H, F1AE0481HA, F1AE0481R, F1AE0481RA, F1AE0481UA, F1AE0481VA
3.0D: F1CE0481A, F1CE0481B, F1CE0481F, F1CE0481H

Made in China

Petrol twin cam locking/setting tool set FIAT 1.6 16V, 50692A
Contents:
TDC Position tool – OEM No. 1 895 443 000
Tensioner adjuster – OEM No. 1 860 876 000
Camshaft Setting Plate ( Inlet and Exhaust ) - OEM No. 1 860 874 000

Applicable:
Fiat 1.6 16v twin cam petrol engine (95-) in:

Fiat: Brava, Bravo, Marea, Marea Weekend, Multipla, Palio, Stilo

Engine code:

178B3.000, 182A4.00, 182A6.000 & 182B6.000

Made in China

Timing Belt Change Engine Tool Set for Fiat, Ford, Lancia 1.2 & 1.4 8V, 780-8141

Features:
For locking the camshaft and crankshaft in place while you change the timing belt and perform other repairs on Fiat engines.
Kit consists of crankshaft locking tool, camshaft setting plate and belt tensioner adjuster for the 1.2 engine, and additional sprocket locking tool and alignment fixture for the camshaft on the 1.4 VVT engine.

Applicable:
Facilitates changing of the timing belt and allows checking of the engine timing on following cars:
- Fiat: 500 (07-12), Doblo/Cargo (05-10),Grande Punto (07-12), Idea (04-12), Linea (07-11), Panda EVO2, Punto EVO (09-12).
- Lancia: Ypsilon (06-11), Musa (05-12).
- Ford: Ka (09-12).
Fits following engines mdodels:
- Fiat: 1.2/1.2 Dualogic, 169A4.000,188A4.000 (EVO2), 199A4.000 1.4/1.4 Bi-Fuel LPG / 1.4 Natural Power CNG,199A7.000, 350A1.000.
- Lancia: 1.4/1.4 Bi-Fuel LPG, 350A1.000.
- Ford: 1.2 Duratec, 169A4.000 (FP4).
Includes following tools:
- Crankshaft Locking Tool
  to be used as OEM 2.000.004.500 on Fiat/Lancia and OEM 303-1480 on Ford.
- Camshaft Setting Tool
 to be used as OEM 2.000.004.400 on Fiat/Lancia and OEM 303-1479 on Ford.
- Camshaft Sprocket Locking Tool
 to be used as OEM 2.000.004.200 on Fiat/Lancia and OEM 303-1477 on Ford.
- Camshaft Cover Aligner 
to be used as OEM 2.000.004.300 on Fiat/Lancia and OEM 303-1478 on Ford.
- Tensioner Adjuster
 to be used as OEM 1.860.987.000 on Fiat/Lancia.

Made in Taiwan

Diesel engine setting/locking kit 2.3D JTD; 3.0D JTD; 3.0D Hdi, 50674
Suitable for adjustment and engagement of the Fiat 2.3D JTD diesel engine, the Fiat 3.0D JTD diesel engine and the Citroen / Peugeot 3.0D Hdi diesel engine (Chain Drive).
The set includes camshaft adjustment pins, crankshaft locking bolts and a locking sensor.

Application:

Citroen: Relay / Jumper III (06-12)

Fiat: Ducato (02-11)

Iveco: Daily (03-10); Daily / Eco Daily (09-11)

Peugeot: Boxer III (06-12)

Engine codes:

2.3D: F1AE0418A, F1AE0481B, F1AE0481C, F1AE0418D, F1AE0481F, F1AE0481FA, F1AE0481G, F1AE0481H, F1AE0481HA, F1AE0481N, F1AE0481UA, F1AE0481VA
3.0D : F1CE0481A, F1CE0481B, F1CE0481D, F1CE0481F, F1CE0481H, F1CE3481M
3.0HDi :    F30DTE; (F1CE0481D), (F1CE3481DM), (F1CE3481N)

OEM No. OEM Tools: 99360614/(-).0191/2.B, 99360615/2.000.018.200/(-).191/2.A, 99360608/1.860.617.000 

Made in China

Fiat Alfa Romeo Lancia 1.2; 1.4 16V - Engine Timing Tool Set, 50523

Features: For adjusting the engine timing during timing belt replacement, cylinder head repair, replacement of the cylinder head gasket, etc.

Suitable for Alfa Romeo, Fiat and Lancia 1.2 16V / 1.4 16v / 1.4 T-Jet

Engine codes:

169A3000, 179B9000, 182B2000, 188A5000, 192B2000, 198A1000, 198A4000, 199A6000, 199A8000, 843A1000

Contents:

OEM 2.000.004.500 - Crankshaft locking tool (with screws M6x30 and 3 pcs. M8x16)

OEM 1.860.985.000 - Camshaft adjusting tool (1 pair)

OEM 1.860.992.000 - Adjusting tool for piston height

OEM 1.860.987.000 - Adjusting tool for timing belt tensioner

OEM 2.000.015.800 - Locking tool for camshaft sprockets (with screw M8x30)

Made in China

Flywheel Holding Tool, 9G0605
Feaures: It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing. This locking tools securely locates in the teeth and fixes to the housing using manufacturers guidelines.
Suitable for petrol and diesel engines.
Flywheel locking tool for Citroën, Fiat, Peugeot, BMW, Renault and Mercedes-Benz vehicles.
Applicable:
Citroen: Berlingo / Relay / Synergie 1.9D / TD / 2.0T with engine codes RFU, RFW, RGX
Peugeot: 205 / 305 / 306 / 309 / 405 / 605 / 806 / Boxer / Partner / Expert 1.6 / 1.9D / TD with engine codes XUD7, XUD9, XUD7TE, XUD9Y, XUD9A, K9K
Fiat:1.8 / 2.0 / 2.0T with engine codes LFW, RFU, RFW, RGX

OEM:
BMW 119260
Renault MOT 582-01, PSA 0153A, 6012T, 9765.54
Fiat 1860161000, 1867030000
Mercedes-Benz 607589014000.

Made in Taiwan