crank shaft

BMW M52TU/M54/M56 - Crankshaft Pulley Holding Tool, 50296

Features: For BMW 6 Cylinder Engine M52TU / M54 / M56
Tool is designed to hold the crankshaft pulley stationary while loosening or tightening the center screw.
It can safely remove the pulley and won't damage the pulley shock - proof function.

Application: BMW (M52, M54, M56).

Made in China

Volvo, Ford - Diesel/Petrol Crankshaft Holding Tool, 50791

Used to counter-hold the crankshaft pulley to release and tighten the centre bolt.
Application:
Volvo: S40, V40, V50, XC90, XC70, S70, V70, S60, S80, C30, C70.
Ford: Mondeo, Galaxy, S-MAX, Focus, Kuga.
OEM: 999 5433/303-1179

Made in China

BMW N47 N57 Crankshaft Locking Tool, 50728

It’s difficult to replace the oil pump chain, both timing chains, the gear of the high pressure pump and of the balancer shaft if without this locking tool.
Without this tool the engine works irregularly.

• Applications: BMW 2.0 N47 & 3.0 N57 diesel engines.

• OEM Code: 114 320.

The crankshaft must be blocked in order to release central bolt of the high pressure pump. Position special tool with screw at the crankcase. Release central bolt of high pressure pump.

Important! Release central bolt only, do not remove.

Used on the following Vehicles:
BMW 1 Series 2007 - 2015 EfficientDynamics
BMW 2 Series 2014 - 2016 114d/116d/118d/120d/123d
BMW 3 Series 2007 - 2017 125d/218d/220d/225d
BMW 4 Series 2013 - 2017 316d/318d/320d/325d/330d
BMW 5 Series 2007 - 2017 320d EfficientDynamics
BMW 6 Series 2011 - 2017 420d/425d/418d/520d
BMW 7 Series 2008 - 2015 518d/525d/530d/535d
BMW X1 2009 - 2015 520d GT/530d GT
BMW X3 2007 - 2017 d
BMW X5 2012 - 2017 640d/730d
BMW X4 2014 - 2017 xDrive
BMW X5 2010 - 2017 sDrive
BMW X6 2010 - 2017 M550d/750d/M50d
BMW X6 2010 - 2017 xDrive
Engine Codes:
1.6cc
N47 D16C N47 D16
2.0cc
N47 D20A/K0 N47 D20A N47S D20B/D/T0 N47 D20C/K1 N47 D20C N47 D20C/U1 N47 D20C/O1 N47 D20D N47 D20D/T1 N47 D20A/U0 N47T D20K1 N47 D20U0 N47T D20U1 N47T D20O1 N47 D20C/O N47 D20C/01 N47 D20O0 N47S D20D/T0 N47 D20A/O0
3.0cc
N57 D30U0 N57 D30A/O0 N57 D30A/O1 N57 D30B N57 D30A N57 D30UO N57 D30O0 N57 D30O1 N57 D30B/T1 N57 D30TO N57 D30A0/O0 N57 D30T0 N57 D30B/T0 N57 D30C/S1 N57 D30C

Engine Crankshaft Pulley Remover Tool Set-Jaguar-Land Rover V8-Chain Drive, 50821

Special designed for pulley removal and holding tools.
Appicable: New Range Rover, Range Rover Sport, Discovery 3, Jaguar XJ8, XJR, S Type, XF, XK8, XKR.
Suitable for Jaguar and Land Rover 3.2, 3.5, 4.0, 4.2, 4.4 V8 petrol engines.
Land Rover 3 / Discovery 3 V8 4.4L | '05 - '09 | 4.4 V8 Engine Only
Range Rover Full Size 4.4 (Jag Engine) | '06 - '09 | JAG V8 ENGINE
Range Rover Full Size 4.2 Supercharged (Jag Engine) | '06 - '09 | JAG V8 ENGINE
Range Rover Sport | '06 - '09
Range Rover Sport Supercharged | '06 - '09

Made in China

Engine timing tool set - BMW Vanos V8 X6M M-SERIES 550i 750i N63 S63 N74, 50668

Features: Specific tool kit that is required to perform camshaft and VANOS timing for BMW N63 and S63 engines.

Contents:
Crankshaft Alignment Tool – OEM No. 11 8 570
Camshaft Alignment Tool Retaining Bolt and Holder – OEM No. 11 9 891,11 9 892
Camshaft Alignment Tool(2) – OEM No. 11 9 893
Crankshaft Timing Pin – OEM No. 11 9 190

Made in China

VW, AUDI Crancshaft locking pin M18x1.5, 50767

Features:
To lock the crankshaft at the TDC position

Applicable:
V6, V8 engines.
OEM No.: 3242, T30052.

VW, AUDI Crancshaft locking pin M14x1.5, 50766

Features:
To lock the crankshaft at the TDC position

63 pcs Fiat/ Alfa/ Lancia engine timing tool kit
Description:
This is the ultimate master Engine Timing Tool Kit for Alfa Fiat Lancia.
Comprehensive engine timing tool set for Italian cars.

Contents:
Includes all tools required for camshaft alignment, tensioning and crankshaft alignment to cover a wide range of petrol and diesel engines packed in blow moulded case with bespoke foam insert with perfect indents for every tool in the collection.
Suitable For:
Contains important tools for adjustment: flywheel, crankshaft, camshaft, fuel injection pump shaft, belt pulley, tensioning of the timing belt, complete classification chart included fits varoius engines.
- Alfa Romeo vehicle with 1.4;1.6 1.8, 2.0 and 3.0L 4 cylinders; 6-cylinder engine Alfa Romeo 145, 146, 147, 155, 156, 164, 166, GTA, GTV and Spider GT
- Fiat, Lancia vehicle with 1.2, 1.4, 1.6, 1.8 And 2.0L 4; 5-cylinder engine Fiat Panda, Punto, Palio, Siena, Bravo, Brava, Stilo, Marea, Multipla, Barchetta, Lancia Dedra, Delta, Kappa and Lydra.

Made in: China

 Timing Tool set for VAG 1.6 and 2.0 TDI
Description:
A nine piece engine locking tool kit for the 5th generation VAG "blue motion" engine fitted with a common rail diesel system.
This kit has been designed to fit the newest Common Rail diesel engines which are significantly different from the older PD engines.
These CR engines combine belt and gear drives by using a toothed belt to transfer the drive from the crankshaft to one of the cam shafts then using gears to transfer the drive from one cam to the other.
For 5th Generation Common Rail diesels (Blue Motion). Includes camshaft pulley puller

Applications:
Audi
- A1 (2010-2015), A1 Sportback (2010-2015)
- A3 (2008-2013), A3 Cabrio (2008-2013), A3 Sportback (2008-2013)
- A4 Quattro (2007-2015), A4 AllRoad (2009-2015)
- A5 Coupe (2008-2015), A5 Cabriolet (2008-2015), A5 Sportback (2008-2015)
- A6 (2008-2014)
- TT (2008-2014)
- Q3 (2011-2015)
- Q5 (2008-2016)
Seat
- Alhambra (2010-2015)
- Altea (2009-2015), Altea XL (2009-2015)
- Exeo (2009-2013)
- Ibiza (2009-2015)
- Leon (2009-2013)
- Toledo (2012-2019)
Skoda
- Fabia II (2010-2015)
- Octavia II (2008-2013)
- Praktik (2010-2015)
- Rapid (2012-2015), Rapid Spaceback (2012-2015)
- Roomster (2010-2015)
- Superb II (2008-2015)
- Yeti (2009-2017), Yeti Outdoor (2009-2017)
Volkswagen
- Amarok (2010-2016)
- Beetle (2011-2015)
- Caddy (2010-2015), Caddy Maxi (2010-2015)
- CC (2012-2015)
- Crafter (2011-2017)
- Eos (2008-2015)
- Golf Plus (2009-2014)
- Golf V Estate (2007-2009)
- Golf VI (2008-2013), Golf VI Cabrio (2011-2015)
- Jetta (2008-2011), Jetta (2011-2016)
- Passat (2009-2011), Passat CC (2008-2012), Passat (2011-2015), Passat AllTrack (2011-2015)
- Polo (2009-2014)
- Scirocco (2008-2014)
- Sharan (2010-2015)
- Tiguan (2007-2016)
- Touran (2010-2015)
- Transporter T5 (2009-2015), Transporter T6 (2016–present)
Engine codes:
1.2: CFWA
1.6: CAYA, CAYB, CAYC
2.0: CAAA, CAAB, CAAC, CAGA, CAGB, CAGC, CAHA, CAHB, CBAA, CBAB, CBAC, CBBA, CBBB, CBDA, CBDB, CBDC, CCHA, CEGA, CFFA, CFFB, CFFD, CFFE, CFHC, CFHF, CFGC, CFJA, CGLA, CGLB, CGLC, CJAA, CJCA, CJCB
OEM#: T10050, T10100, T10051, T10052, T10255, T10060A / T40098, T10264, T10265, T20102 / 3359.

Made in China

Diesel engine setting/locking kit 2.3D JTD; 3.0D JTD; 3.0D Hdi, 50674
Suitable for adjustment and engagement of the Fiat 2.3D JTD diesel engine, the Fiat 3.0D JTD diesel engine and the Citroen / Peugeot 3.0D Hdi diesel engine (Chain Drive).
The set includes camshaft adjustment pins, crankshaft locking bolts and a locking sensor.

Application:

Citroen: Relay / Jumper III (06-12)

Fiat: Ducato (02-11)

Iveco: Daily (03-10); Daily / Eco Daily (09-11)

Peugeot: Boxer III (06-12)

Engine codes:

2.3D: F1AE0418A, F1AE0481B, F1AE0481C, F1AE0418D, F1AE0481F, F1AE0481FA, F1AE0481G, F1AE0481H, F1AE0481HA, F1AE0481N, F1AE0481UA, F1AE0481VA
3.0D : F1CE0481A, F1CE0481B, F1CE0481D, F1CE0481F, F1CE0481H, F1CE3481M
3.0HDi :    F30DTE; (F1CE0481D), (F1CE3481DM), (F1CE3481N)

OEM No. OEM Tools: 99360614/(-).0191/2.B, 99360615/2.000.018.200/(-).191/2.A, 99360608/1.860.617.000 

Made in China

Diesel engine setting and locking tool kit OPEL 1.9 CDTI, 50087

Diesel engine setting/locking kit - Vauxhall 1.9CDTI, Alfa Romeo 1.9 8/16v, 2.4 10/20v jtd belt drive.
ContentsIncludes flywheel holding tool to remove/install crankshaft pulley, crankshaft locking tool and camshaft setting tools.
Suitable for setting and locking Alfa Romeo and fiat 1.9 and 2.4jtd including 16v and 20v variants.
Suitable for setting and locking Alfa Romeo and fiat 1.9 and 2.4jtd including latest 1.9jtd 16v and 2.4jtd 20v engines.
Applications:
Vauxhall/Opel: Astra-H (04-11), Astra-J (10-15), Cascada (13-15), Insignia (08-13), Signum (04-08), Vectra-C (04-08), Zafira-B (05-12), Zafira-C Tourer (11-15)
Saab: 9-3 (04-10), 9-5 (05-10)

Engine Codes:
1.9D CDTi: Z19DT, Z19DTH, Z19DTJ, Z19DTL
1.9D TiD: Z19DT, Z19DTH
1.9D TTiD: Z19DTR
1.9D XTTiD: A19DTR, Z19DTR
2.0D CDTi/ecoFLEX: LBQ/A20DTL, LBR/A20DT, LBS/A20DTH, LBX/A20DTJ, LBY/A20DTR, LCD/A20DTC
2.0D TiD: LBS/A20DTH
2.0D TTiD: LBY/A20DTR
Engine Codes:
1.6D JTD/M - 198A2.000, 198A3.000, 198A6.000, 350A2.000, 350A3.000, 940A3.000, 955A3.000, 955A4.000,
1.9D JTD/M 8v - 323.02, 371.01, 182B4.000, 182B9.000, 186A6.000, 186A8.000, 186A9.000, 188A2.000, 188A7.000, 188B2.000, 192A1.000, 192A3.000, 192A8.000, 192A9.000, 192B4.000, 192B5.000, 199A5.000, 223A7.000, 223B1.000, 937A2.000, 937A3.000, 939A1.000, 939A7.000, D19AA.
1.9D JTD/M 16v - 192A5.000, 192B1.000, 844A1.000, 937A4.000, 937A5.000, 937A6.000, 939A2.000, 939A8.000.
2.0D JTD/M - 844A2.000, 940A4.000, 940A5.000.
2.4JTD 10v - 325.01, 342.02, 362.02, 185A6.000, 838A8.000, 839A5.000, 839A6.000, 841C.000.
2.4JTD 20v - 841G.000, 841H.000, 841M.000, 939A3.000, 939A9.000.

Made in China