BMW

BMW M52TU/M54/M56 - Crankshaft Pulley Holding Tool, 50296

Features: For BMW 6 Cylinder Engine M52TU / M54 / M56
Tool is designed to hold the crankshaft pulley stationary while loosening or tightening the center screw.
It can safely remove the pulley and won't damage the pulley shock - proof function.

Application: BMW (M52, M54, M56).

Made in China

BMW DCT Dual Clutch Remover and Installer tool, 50863

Used to remove and install clutches on BMW 7 speed DCT (Dual Clutch Transmission) transmissions in BMW vehicles.
Application range: BMW GS7D36SG (DKG) transmission.
135i E82 / E88 2011-2013,
335is E92 / E93 2011-2013,
M3 E90 / E92 / E93 M-DCT 2008-2013,
Z4 sDrive35i E89 2009-2014 & Z4 sDrive35is E89 2011-2014.

OEM Code: 230 400

BMW N47 N57 Crankshaft Locking Tool, 50728

It’s difficult to replace the oil pump chain, both timing chains, the gear of the high pressure pump and of the balancer shaft if without this locking tool.
Without this tool the engine works irregularly.

• Applications: BMW 2.0 N47 & 3.0 N57 diesel engines.

• OEM Code: 114 320.

The crankshaft must be blocked in order to release central bolt of the high pressure pump. Position special tool with screw at the crankcase. Release central bolt of high pressure pump.

Important! Release central bolt only, do not remove.

Used on the following Vehicles:
BMW 1 Series 2007 - 2015 EfficientDynamics
BMW 2 Series 2014 - 2016 114d/116d/118d/120d/123d
BMW 3 Series 2007 - 2017 125d/218d/220d/225d
BMW 4 Series 2013 - 2017 316d/318d/320d/325d/330d
BMW 5 Series 2007 - 2017 320d EfficientDynamics
BMW 6 Series 2011 - 2017 420d/425d/418d/520d
BMW 7 Series 2008 - 2015 518d/525d/530d/535d
BMW X1 2009 - 2015 520d GT/530d GT
BMW X3 2007 - 2017 d
BMW X5 2012 - 2017 640d/730d
BMW X4 2014 - 2017 xDrive
BMW X5 2010 - 2017 sDrive
BMW X6 2010 - 2017 M550d/750d/M50d
BMW X6 2010 - 2017 xDrive
Engine Codes:
1.6cc
N47 D16C N47 D16
2.0cc
N47 D20A/K0 N47 D20A N47S D20B/D/T0 N47 D20C/K1 N47 D20C N47 D20C/U1 N47 D20C/O1 N47 D20D N47 D20D/T1 N47 D20A/U0 N47T D20K1 N47 D20U0 N47T D20U1 N47T D20O1 N47 D20C/O N47 D20C/01 N47 D20O0 N47S D20D/T0 N47 D20A/O0
3.0cc
N57 D30U0 N57 D30A/O0 N57 D30A/O1 N57 D30B N57 D30A N57 D30UO N57 D30O0 N57 D30O1 N57 D30B/T1 N57 D30TO N57 D30A0/O0 N57 D30T0 N57 D30B/T0 N57 D30C/S1 N57 D30C

BMW N62; N73 Camshaft alignment tool set, 50734

Main set of chain synchronization tools for 3.6; 4.0; 4.4; 4.8; 6.0 V8 engines. Designed for BMW N62 V8 and N73 V12 engines.
The kit has all the necessary tools to lock and hold the crankshaft and crankshaft in their correct synchronization positions.
Contents:
1. Inlet Camshaft Gauge (11 9 461)
2. Exhaust Camshaft Gauge (11 9 462)
For positioning the camshaft at the TDC position (top dead center) for checking and adjusting the synchronization.
Application: BMW N62, N62TU, N73, E53, E60, E61, E63, E64, E65
3. Bracket with bolt (11 9 463)
To check and adjust the camshaft when synchronizing.
Application: BMW N62, N62TU, N73
4. Camshaft alignment pin. (11 9 190)
To block the flywheel at the TDC position (top dead center).
Application: BMW N40, N42, N62, N62TU, N73
5. Chain tensioner (11 9 340)
For tension primary chain and Short format for new generation new generation engines.
Application: BMW N40, N42, N45, N46, N52, N62
6. Left cylinder head socket (11 7 270)
For disassembly and assembly left cylinder head.
Application: BMW N73
7. Gasket and Bolt (11 9 452)
Application: BMW N62, N62TU, N73
8. Fixing Crankshaft wrench (11 9 451)
It works with a 27 mm socket  and serves for the removal and installation of the crankshaft.
Application: BMW N62, N62TU, N73
9. Angle indicator (11, 9, 453)
Indicates the angle of the gauge and uses 27mm Socket to fix this tool.
Application: BMW N62, N62TU, N73
10. 27 mm socket (11 9,454)
Application: BMW N62, N62TU, N73
11. Gauge Angle Position (11 3 460)
Graduated disc for torque center bolt.
Application: BMW M60, M62, M73, N62, N62TU, N73
ОЕМ Tools No.:
 11 3 460, 11 7 270, 11 9 190, 11 9 340, 11 9 451, 11 9 452, 11 9 453, 11 9 454, 11 9 461, 11 9 462, 11 9 463
Applicable: For diesel and petrol engines fitted to: 540i, 545i, 550i, 645i, 650i, 735i, 740i, 745i, 750i, X5.
2001-2009 3.6~4.8 Liter V8 N62 с SFI fuel injection, Double-VANOS и Valvetronic 2003-2009 6.0 Liter V12 N73.

Made in China

Timing Tool Kit - BMW MINI ONE/COOPER/COOPER S, 50300

Specifically designed for pre 2009 petrol chain driven engines  Mini One/Cooper and Cooper S models. Also fits JC works and convertible variants
Contents:
Camshaft Sprocket Holding Tool – OEM No. 11 8 250
Engine Support Bracket – OEM No. 11 8 370
Tensioner Assembly Tool  - OEM No.  11 8 240
Screw: 2 x M12 x 1,75 mm
Screw:  1 x M12 x 1,50 mm

Applicable:
BMW Mini One 2001-06(W10B16AA)
BMW Mini Cooper 2001-06 (W10B16BA)
BMW Mini Cooper S 2002-06 (W11B16AA)

2002-06 Mini Cooper Coupe - R50 Chassis - W10 Engine
2005-08 Mini Convertible Regular - R52 Chassis - W10 Engine
2005-08 Mini Convertible Cooper S - R52 Chassis - W11 Engine
2002-06 Mini Cooper S Coupe - R53 Chassis - W11 Engine Engine Code
BMW Mini: W10; W11; N12B14AB; N12B16A; W10B16AA; W10B16BA; W11B16AA; R50; R52; R53; R55; R56; R57

Made in China

Camshaft alignment tool set - BMW M47, 50096

This set enables the correct timing to be made when servicing BMW M47 2.0 16 engines
This timing tool set includes crankshaft pin, camshaft setting plate, clamp for camshaft locking tool and the 2 necessary timing pins.
Included:
Crankshaft alignment pin
camshaft alignment tool
clamp assembly for camshaft alignment tool
2x tensioner locking pins
Aplication:
BMW; 118 2.0 E87 (03-07), 120 2.0 E87 (03-07), 318 2.0d/td E46/E90/91 (00-07),
320 2.0d/td E46/E90/91 (97-07), 325 3.0 E90/91/92/93 (06-08), 330 3.0d/xd/cd E46/E90/91/92/93 (98-08),
335 3.0 E90/91/92 (06-08), 520 2.0 E39/E60/61 (99-08), 525 3.0d/xd E39/E60/61 (99-08),
530 3.0d/xd E39/E60/61 (98-08), 535 3.0 E60/61 (04-08), 635 3.0 E63/61 (04-08),
730 3.0d/Ld E38/E65/66 (98-08), X3 2.0 E83 (03-07), X3 3.0d/sd E83 (03-08), X5 3.0 E53/E70 (00-08)
Land Rover; Range Rover 3.0Td6 (02-06), Freelander 2.0Td4 204D3 (00-06),
MG; ZT/T 2.0 (01-05), Rover; 75 2.0CDT/CDTi (99-05)
Engine cod:
BMW; M47, M47TU, M47T2, M57, M57TU, M57T2,
Land Rover; M47R, M57,
MG/Rover; M47R

OEM No.: 11 2 300, 11 6 320, 11 6 322, 11 3 340

The set is in blue case.