Magma

• Purpose: Ensures correct torque and angle application on cylinder head bolts when paired with a suitable torque multiplier (e.g., OEM 303-1611).
• Engine Compatibility: All 2.0L EcoBlue diesel engines.
• Made in China

21 Pcs 1/4" Drive Torque Wrench Set 1 - 25Nm, 51278

Ideal for precise screws and nuts installation.

Sockets material: Cr-V steel
Bits material: S2 steel
Torque range: 1 - 25Nm (0.7 - 18.5lbf-ft).
Scale: 0.2Nm / 0.15lbf-ft.
Accuracy: ±3%.
Drive Square Size: 1/4"
Contains:
Torque Wrench 1 - 25Nm, 72 teeth
Universal Joint
Extension Bar 100mm
Adapter 1/4"F x 3/8"M
17x Bit Sockets1/4”Dr:
Phillips: PH1, PH2, PH3
Hex (37mm): H2, H2.5, H3, H4, H5, H6, H8, H10
Hex (62mm): H5
Torx (37mm Length): T10, T15, T20, T25, T30

Made in China

Hydraulic Drive Shaft Remover/Press Set, 50127

Used to press drive shafts out of wheel hubs.
For 4 or 5 bolt hubs with the centerline of the bolts mounted in a 98-125 mm diameter circle.
Especially for glued and rusty drive shafts.
Has a 10 ton capacity.

Applicable: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen and more.

Made in China

20L Metal Fuel Can, 75088

Ideal for the storage of petrol and diesel.
Made from thick 0.8mm steel
Capacity: 20 L
Size: 350 (L) x 170 (W) x 470 (H) mm
Weight: 3.640 kg

Made in China

2 Way Pull Clamp, 51149

Claw width: 50mm
Total length: 230mm
Single way: 3t
Side way: 1t
Weight: 2.9kgs

Made in China

T20H Extra Long Screwdriver 300mm, 50779B

Magnetic tip screwdriver
With Slip-Not ergonomic soft grip handle.
For use on both Tamper Proof and standard Torx screws.
The long length is ideal for hard to reach screws.
Material: S2 steel.
Blade length: 300mm
Overal length: 400mm
Blade Tip: T20H.

Air Body Saw 93970
It is used for cutting and shaping of a wide range of metal and plastic materials.
Cast aluminum body.
Rubber handle with ergonomic grip.
Speed and cutting efficiency.
Application: For cutting through rods, pipes, bars and even 16 gauge sheet metal with speed and efficiency

Technical Data:
Stroke per minute: 10000 spm
Stroke Lenght: 8-10 mm
Cutting capacity (steel): 1.5 mm)
Cutting capacity (aluminum): 2.0 mm
Air Pressure: 6 Bar
Air Inlet: 1/4”
Air Hose: 3/8" (I.D.)
Avg.Air Consumption: 4 cfm (114 l/min.)
N.W.: 0.65 kgs

M6x1.0, 100 pcs Helicoil thread inserts, 50727B

Description:
Precisely shaped stainless steel wires with diamond-shaped cross-section.
Easy way to recover threads or create new ones.
Made of corrosion-resistant stainless steel.
Size: M6x1.0
Package of 100 pcs.

114 pcs Oil Drain repair kit, 50628
A comprehensive thread repair kit ideal for repairing sump, gearbox and different drain plug threads.
Used to tap the damaged thread slightly over size, then fit a new drain plug and washer (supplied).
Applicable for: Audi, BMW, Citroen, Daimier-Benz, Ford, Fiat, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Porshe , Renault, Saab, Seat, Skoda, Toyota, Volvo, VW.

BMW B37, B47, B57 - Diesel Engine Timing Tool Set, 51171

This diesel engine timing tool set is designed for BMW B37, B47, and B57 engines.
Compatible with a wide range of BMW models, including 1, 2, 3, 4, 5, 6, 7, 8 Series, and X Series, it ensures precise and safe timing adjustments.
OEM №: 11 8 760, 11 6 480, 2 365 488, 2 288 380, 2 448 914, 2 420 824, 11 3 340. 

Made in China

8l Oil drain can, 51127

Suitable for draining and storing: oil, gasoline, antifreeze, coolant, etc.
Capacity 8 l.
Material: plastic

Made in China

BMW - Differential Front Bush Extractor F Series, 50954

Features: This tool is used to extract and install the transversely mounted differential mounting bushing that is located in the rear subframe.
The service work can be performed on-car without the removal of the subframe.
Applicable:
BMW F01 — (2008–present) 7 Series
BMW F02 — (2009–present) 7 Series long wheelbase
BMW F04 — (2011–present) 7 Series ActiveHybrid
BMW F06 — (2011–present) 6 Series Gran Coupe/M6 Gran Coupe
BMW F07 — (2009–present) 5 Series Gran Turismo
BMW F10 — (2011–present) 5 Series Sedan/M5 Sedan
BMW F11 — (2012–present) 5 Series Touring
BMW F12 — (2011–present) 6 Series Coupe/M6 Coupe
BMW F13 — (2011–present) 6 Series Convertible/M6 Convertible
BMW F18 — (2010–present) 5 Series long wheelbase

Models: BMW F01 / F02 / F06 / F07 / F10 / F11 / F13

OEM Bush number: 33316792873

Made in China

52 Pcs Paintless Dent Repair Kit, 51044

Used to removesmall deents quickly and easily without expensive paintwork.
Set conteins:
1pc Clue gun
1pc Slide Hammer
1pc Dent puller
1pc Plastic Scraper
1pc Spray Bottle
10pcs Glue sticks
37pcs Glue Tabs

Made in China

M8x1.0 Thread repair set , 50725M

Features:
This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bit, thread tap, insert installations (heli-coil - 10 pcs) and lug breaking tool.
Size: 8x1.0

Made in China

4" (102 mm) Replacement stone, 50724

Size: 4" (102 mm)

3 pcs set, for Standard engine cylinder hone 50724

Made in China