Magma

Cylinder leak detector, 50185

1.Tester checks the amount of leakage in an engine cylinder&helps detemine the source.
2.Best used when comparing a suspect cylinder to a known good cylinder on same engine.
3.Ideal for testing trucks&late model cars where clearance is minimal.
4.Equipped with 2-1/2" input pressure gauge for proper leakage test setup and accurate results.

Designed to detect a variety of common engine faults including: Worn piston rings, worn valves, cylinder head cracks and blown head gaskets.
Twin gauge manifold shows percentage of cylinder leakage and cylinder pressure.
Suitable for use on any petrol engine with 10, 12 or 14mm spark plugs.

Made in: China

Tail Pipe expander

Drop forged with heat treated steel
Designed quickly and easily straighten out clamp dent in mufflers and tailpipes. A simple wrench turn expands pipe for exhaust system repair and installation.
Works with all 1-1/8" to 3-1/2"ID. thin wall pipes
Capacity:
Small expander: 1-1/8" to 1-3/4" (29-44mm)
Medium expander: 1-1/2" to 2-1/2" (38-64mm)
Large expander: 2-1/8" to 3-1/2" (54-89mm)

The set is in blue case.

3 pcs Flexible Spout funnel set, 51300

Suitable for petrol, diesel, oil, brake fluids, anti-freeze and windscreen wash.
Transperent hose ideal for restricted access areas.
Funnel with handle and removable filter.
Funnel size:
Diameter: 140 mm
Lenght: 150 mm
Flexible spout lenght: 265 mm
Hose size:
Diameter: 12 mm
Lenght: 600 mm

Made in China

MINI N12, N16, N18 - Valve Pressure Spring Remover and Installer Set, 50589

Features: Designed to remove and install the pressure spring on intermediate lever.
Application:
MINI: Clubman, Clubvan, Countryman, Cooper, Coupé, Mini One, Paceman, Roadster.
Citroen: C3, C3 Picasso, C4, C4 Picasso, C5, DS3, DS4, DS5.
Peugeot: 207, 208, 3008, 308, 5008, 508, RCZ, Partner.
Engine codes:
MINI: N12, N16, N18
PSA: EP6, EP6CDT, EP6CDTM

OEM tools: 11 9 571/0197-3B1, 11 9 572/0197-3B2.

Made in China

12 Pcs Air Bag Removal Tool Set, 50219

Specifcation:
5pcs –1/4" Dr. x 87mm (L) Bit socket;
2-Torx: T25 (For BMW), T30 ( For AUDI, OPEL, RENAULT, VW).
2-Torx (tamperproof): T25H (For BMW), T30H (For AUDI, BMW, MERCEDES, OPEL).
1-Hex: 5mm (For AUDI).
7pcs Airbag Removal Tool:
2pcs for dismantling Volkswagen: Passat B5, POLO, LUPO; Audi: A4, A6; Skoda Superb
2pcs for dismantling Volkswagen: Golf 4, Beetle, SEAT; Skoda, Fabia; Octavia
1pc for dismantling Volkswagen: Golf 4 (1998-2004), Passat (1997), Bora (1999)
1pc for dismantling Volkswagen Passat (2000)
1pc for dismantling Volkswagen: Passat, Jetta, Golf, Beetle

Made in China

Brake fluid tester, 50464

For quick and accurate checking of the brake fluid condition.
Identifies the percentage of water in the brake fluid.
 A basic tool for regularly checking the safety of your brakes.
Easy to use.
Color-coded LEDs indicate the water level.
Power supply: 1 x1.5V "AAA" battery
Indications:
Green: Battery OK, no water found.
Yellow: Less than 1% water. No action necessary.
Yellow/Yellow: 2% water found, check regularly.
Yellow/Yellow/Red: 3% water found, change brake fluid.
Yellow/Yellow/Red/Red: 4% water found, the brake fluid should be changed immediately.

Made in China

Engine Timing Tool Kit Vauxhall/Opel, Saab, Chevrolet 2.0; 2.4 – diesel engines, 50210

This kit contains all the engine synchronization tools for OPEL / Vauxhall, SAAB, Chevrolet 2.0; 2.4.
Applicable to the following car models:
GM / Vauxhall / Opel: Astra, Insignia, Antara Turbo
Chevrolet: Captiva, HHR, Malibu
Saab: 9-5
Engines:
2.0L: LHU (A20NFT) / LTG (A20NHT) / LDK (A20NHT)
2.4L: A24XE / A24XF / LE5 / LE9
OEM No.: EN-48585 / EN-43653 / J43653 / EN-955-10 / KM 955 / EN-955-20 / KM 955-20 / EN-45027-1 / J-45027-1 / J-45027-2 / EN45027-2 / EN-45027 / EN-49212 / EN-49212-1 / EN-49212 / EN-49212-2 I / EN-48953
Contents:
Crankshaft pulley alignment tool - OEM EN-48585
Flywheel holding tool - OEM EN-43653, J43653
Tensioner retaining pin 2.5 mm - OEM EN-955-10, KM 955
Tensioner locating pin 4.0 mm - OEM EN-955-20, KM 955-20
Tension plunger resetting tool - OEM EN-45027-1, J-45027-1
Tension plunger holder - OEM J45027-2, EN45027-2, EN-45027
Camshaft locking tool (left side) - OEM EN-49212, EN-49212-1
Camshaft locking tool (right side) - OEM EN-49212, EN-49212-2
Camshaft adjuster holding tool - OEM EN-48953

Made in China

Vacuum Oil and Fluid Extractor, 50546

Suitable for the extraction of engine oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. Also suitable for low viscosity fluids such as water.
Do not use with petrol or other flammable liquids.
Tank base for feet to step on to stabilize the tank while pumping.
Capacity 5.5L.

Made in China

Fuel Retriever 1.5L, 50888

Features:
Used to remove brake fluid, coolant, gear oil, or Power-steering fluid prior to brake work or other repairs.
Works with any type of Automotive Fluid such as Oil, Antifreeze, Fuel and including Brake Fluid.
Compact design makes sure there is no oil leakage.
Accesses difficult-to-reach locations.
Unit easily disassembles for cleaning.
Transparent body for easy readings.

1.5L large-volumes.
Material: plastics

Made in China

3" Replacement stones for Cylinder Hone, 50722

3 pcs set, for Standard engine cylinder hone

Hone lenght: 75 mm

Made in China

Battery Post and Terminal Brush, 51302

Used to remove dirt, rust and corrosion from battery posts and terminals.
External brush for cleaning battery terminals.
Internal brush for cleaning battery posts.
Damage resistant steel bristles.
Nickel-plated metal construction.
Total length: 80mm.

Made in China

Seal Puller 50107

Used to remove oil and grease seals
Two different size tips enables this tool to accommodate most applications.

Made in China

Motorcycle brake caliper removal kit, 50448

A set of tools that greatly facilitates and saves time when dismantling brake calipers on motorcycles.
Removes frozen pistons with ease.
Will not mark or damage the working part of the piston.
It contains a set of 12 universal adapters with dimensions 19 - 30 mm.

Made in China

Hose clamp pliers, 50738

Features: To remove and install clamps for hose connections in hard-to-reach areas.
With ratchet locking mechanism.
Comfortable handle with ergonomic grip.

Ø65mm Telescoping Inspection Mirror with LED, 51296

Inspection mirror with built-in LED light.
Impact resistant ABS frame for better mirror protection.
Swivel joint design provides improved accessibility for hard to reach areas.
Textured, ergonomic handle for superior grip and control.
Supplied with two pieces CR2032 3V batteries.
Mirror diameter: 65mm.
Adjustable Length: 275-855mm.

Made in China