Magma

Seal Puller, 50108

Double Hook with joint for removal of shaft gaskets.
Quick and easy disassembly with 320 mm lever.
Lever adjustable in five positions of up to 45°

Made in China

17 pcs Master Front Wheel Drive Bearing Service Kit, 50405

Comprehensive set for the removal and installation of front hub bearings
Without the need to dismantle the steering assembly.
Heavy Duty Steel Drifts
Hub Screws - M12 x 1.5 and M14 x 1.5mm
Drift sizes - 55.5.59.62.65.66.71.5.73.78.84.86.91mm
Suitable for most front wheel drive cars and vans.

Made in China

VAG 1.2/1.4TFSI Timing Tools, 50169

Timing chain wear measuring kit for the latest VAG 1.2 & 1.4 TFSi chain drive petrol engines.
Allows the timing chain wear to be accurately measured with the minimum amount of dismantling.
If the angle reading shown exceeds that of the manufacturer’s angular measurement then the camshaft drive chain and associated components must be replaced.
Applicable:
Audi: A1 (2012-2015), A1 Sportback (2012-2015), A3 (2013-2015), A3 Sportback (2012-2015)
Seat: Ibiza (2012-2017), Leon (2012-2015), Toledo (2012-2017)
Skoda: Fabia II (2010-2015), Fabia III (2014-2017), Octavia II (2010-2013), Octavia III (2010-2015), Praktik (2010-2015), Roomster (2010-2015), Rapid (2015-2017)
Volkswagen: Golf VII (2008-2015), Golf VII Estate (2008-2017), Jetta (2012-2018), Polo (2012-2018), Sportsvan (2014-2017)
Engine Codes:
1.2 TFSi: CJZA, CJZB, CJZC, CJZD
1.4 TFSi: CGGA, CGGB, CHPA, CMBA, CPVA, CPVB, CRJA, CXSA
1.4 TFSi ACT: CPTA

OEM: T10550

Made in China

Pneumatic Brake fluid bleeder, 50445

Features:
Closed system for refilling brake fluid and for brake fluid bleeding.
Applicable for most of traditional and ABS braking systems of cars and motorcycles.
The set includes adapters with the following sizes:
- 21-30 mm
- 24-32 mm
- 28-37 mm
- 32-41 mm
Features:
Air Requirement: 6 - 8 Bar (90-120 Psi)
Air consumption: 180 l / min.
Capacity of reilling container: 0.75 l
Air Inlet: 1/4 "

Made in China

Vacuum and fuel hose pliers, 50737

For easy removal hose fuel and vacuum system
Working part: 35 mm
Hose dimensions: 4 - 12.5 mm (5/32 "- 1/2")

12 pcs Go Through Screwdriver set 50243
Content:
Slotted screwdriver:
6.0х38 mm;
3.2х75 mm;
5.0х75 mm;
6.0х100 mm;
8.0х150 mm;
9.5х200 mm.
Philips:
РН2х38 mm;
РН0х75 mm;
РН1х75 mm;
РН3х150 mm;
РН4х200 mm

GM 1.0 / 1.2 12V - Engine Timing Tool Set 51287

Features:  For GM 1.0 12V (3-cylinder), 1.0 12V (3-cylinder) turbo and 1.2 12V (3-cylinder) turbo Ecotec / CSS Prime petrol engines.
Applications:
Chevrolet: Onix 1.0 / 1.0 turbo (2019-), Onix Plus (sedan) 1.0 / 1.0 turbo (2019-), Montana 1.2 turbo (2022-), Tracker 1.0 turbo / 1.2 turbo (2020-)
Buick: Encore GX (2020)

OEM# tools: EN-52457, EN-52458, EN-52476

Made in China

7 PCS Drive Shaft Puller Extractor Set, 50046

Use for drive shaft on BMW, VW, Mercedes, SUBARU
230mm Long Puller With 120mm Housing
Include adapters:
M16 x 1.5 for Subaru;
M20 x 1.5 for Volkswagen Beetle, Touareg & Porsche Cayenne.
M22 x 1.5 for BMW E30.
M24 x 1.5 for BMW E36 & Mercedes-Benz W203.
M27 x 1.5 for BMW E32, E34, E38, E39, X5.
M30 x 1.5 for BMW E32, E36, E34

Made in China

Trim clip removal pliers, 50948

Heat treated carbon steel body.

Comfortable handle with plastic coating.

Spring mechanism.

Easy access to confined areas.

Length: 235 mm

Made in China

22 mm 1/2" Dr. Twist socket, 50927-22

Designed for removing damaged nuts and bolts, and especially for locking wheel nuts.
Material: Cr-Mo
1/2" Dr.
Size: 22 mm.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

10 Pcs Double Flaring Tool Set 51245

Designed for double or single flare in soft copper, brass and aluminium tubes.
Set contains:
1pc Flaring Bar
1pc Tube Cutter 1/8" ~ 1-1/8"
7pcs Flaring Adapters: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"
1pc 45° Flaring Cone

Made in China

21 PCS Master Adaptor Set Ball Joint Service Kit, 50042

With 4 Wheel Drive Adaptors
Brake Anchor Pin Removal and Installation
This tool kit is designed for use on all cars and
Light trucks that have press-fit type ball joints
Without the need to remove the control arm from the vehicle
Contents:
C-Frame and Forcing Screw
Installation Adaptor
Removal Adaptor
Installation Cups
Removal Cups
Receiving Tubes
For servicing universal joints on most cars / vans and light trucks
Description:
Includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles. Comes with blow molded carrying case, making it easier to keep the tools organized and easy to transport.
Features:
Solid carbon-steel construction with anti-rust coating for ultimate endurance through years of heavy use.
Designed to easily remove and replace press-fit upper and lower ball joints with receiver tubes and adapters for most full-size GM, Ford, and Dodge vehicles.
Includes all receiver tubes and removing/installing adapters for press-fit upper and lower ball joint service.
The forged C-frame press makes it easier to remove and replace universal joints when stacking with numerous cups and receivers.
The tool case with pre-sized slots for each component keeps your tools securely organized and extends their service life.

Made in China

Magnetic Protective Wing Cover, 50271

Protects the car from damage during maintenance and repair work.
Integral magnetic strips fix the mat in the correct position.
Size: 820x630 mm
Made of polypropylene.

Made in China

21 mm 1/2" Dr. Twist socket, 50927-21

Designed for removing damaged nuts and bolts, and especially for locking wheel nuts.
Material: Cr-Mo
1/2" Dr.
Size: 21 mm.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

63-100 mm 3 Leg Oil Filter Wrench 51233

Working range: 63-100mm
1/2" dr. to 3/8" dr. socket adaptor.
21mm hex head.

Made in China