Magma

60-115mm Oil Filter Chain Wrench 50966

Designed for removing and installing oil filters.
Double chain provides powerful and smooth operation.
Capacity: Ø60-115mm.
1/2" Drive

Made in China

Mercedes Benz Ball Joint Remover Installer Set, 50453

Spesialized 10-Piece tool kit to service all of the pressed-in ball joints incorporated in the Mercedes W210 / W211 / W220 / W230 / W163/ W164 suspensions.
This tool set allows servicing (installation and removal) of the specified ball joints on the vehicle. This saves tremendous time and effort by avoiding the necessity of disassembling the brake system and other suspension components that would disturb suspension alignment.
Includes:
C-Clamp press tool forged (not cast) form SCM440 Steel (HRC 38-42 hardness)
Front Suspension Ball Joint press fixtures for W220 / W211 / W230 Chassis - used in Conjunction with the C-Clamp Press.
Front Sway Bar Ball Joint (pressed into control arm) press fixtures for W220 /
W211 - used in Conjunction with the C-Clamp Press.
Front & Rear Suspension Ball Joint press fixtures for W163 / W164 Chassis - used in Conjunction with the C-Clamp Press.
Ball joint socket (4-prong) for servicing front ball joint on W163 / W164 Chassis
Application: Mercedes Benz
W210 Chassis - 1995-2002 E Class
W211 Chassis - 2002-2009 E Class
W220 Chassis
W230 Chassis
W163 Chassis - 1998-2005 M Class
W164 Chassis - 2006-present M Class

Made in China

Magnetic Fender Cover, 50270

Fatures: To protects the vehicle fender during repair work.

Size: 790х590 mm

Made in China

Spring compressor for Mercedes, 50073

Drop forged yokes head threated
Telescopic construction with 3-point safety interlock and automatic freeheelat and of stroke.
Maximum compression range 325 mm.
Minimum compression range 120 mm.

Applicable for:

Mercedes: W123, W124, W129, W201, W202, W210

Mercedes: W114, W115, W116, W123, W124, W126, W129, W140, W201, W202, W203, W210.

Other models: GM, Peugeot, Rover, Hyundai, Saab, Volvo, Volkswagen, Fiat, Mazda, Toyota, Nissan, Mitsubishi.

The set is in blue case.

Made in China

18 pcs Universal caliper wind back set, 50060
• Provides both left-handed and right-handed thrust bolt assemblies
• Complete set of adaptors for a wide range of vehicle applications
• Designed for push back and wind back brake pistons
• Left-handed thrust bolt required for Ford, Citroen, and Renault applications
• Adaptor plates with thrust bolt assembly and reaction plate are precisely made
• Prevents damaging pistons and seals
• Updated adaptor set applicable for wide variety of vehicles

10 mm 1/2" Dr. Stud Extractor, 50922-10

Designed for removing studs without damaging the threads.
Safe clamping due to 3 rollers. The extractors are the concentric roller bearing type that won't damage the thread on the stud.
Material: Cr-V
1/2" Drive (Hex 21mm).
Size: 10 mm.

Made in China

TDC Position Adapter M12× 1.25, 50527

For spark plug with M12x1,25 bore thread, for Ø8 mm diameter indicators.
Features:
Indicator socket diameter: Ø8 mm (d8).
Length of adapter stem: 25 mm
Spark plug hole thread: M12x1.25
Total length of adapter: 275 mm
Original tool numbers Alfa, Fiat, Lancia: 1860901000; 1871008400.

Made in China

Coil Spring Compressor For Wishbone Suspensions, 50452

Suitable to work on lower supports with a small access (< 30 mm)
Suitable for more coil springs - Working range: 95 - 220  mm
100Nm Extension torque bar controls excessive torque being applied
Holder discs with wide application
Applicable to vehicles with a swing arm diameter of 30 mm and bigger.
Applicable:
Chrysler, Citroen, Ford, Honda, KIA, Mitsubishi, Peugeot, Renault, Seat, Skoda, Suzuki, Toyota, Volvo, Volkswagen,  etc.
BMW 3 series (1996-2013)
Mercedes Benz W202/ W204 (1997-2013)
Includes:
150 mm steel pressure plate
130 mm steel pressure plate
Compressing bar
Extension bar with 100 Nm torque control for use with impact wrench.

Made in China

Ford 2.0 EcoBlue Diesel – Tool Kit for Removal and Installation of Injection Pump, 50955

Application: Ford Transit, Transit Custom, and Tourneo Custom with 2.0L EcoBlue TDCi engines: AWD, FWD, RWD (from 2016).

Engine Codes: YLFS, YMFS, YNFS, YLF6, YMF6, YNF6, YLR6, YMR6, YNRS.
OEM No. 303-1635

Origin: China

3 Jaws Gea

3 Jaws Gear puller 8”, 50742D

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 8”
Capacity: 80 – 203 mm

Made in China

r puller 8”, 50141-8

Thread repair set M6x1.0, 50725B

Features:
This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.

Features:
This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bit, thread tap, insert installations (heli-coil - 10 pcs) and lug breaking tool.
Size: 6x1.0

Made in China

21 pcs Universal Brake Caliper Wind Back Kit, 50061

Suitable for push back and wind back brake pistons.
Includes left- and right-handed thrust bolt assemblies.
Left-handed thrust bolt required for Ford, Citroen and Renault applications.
Adaptor plates with thrust bolt assembly and reaction plate.
Helps prevent damage to pistons and seals.
Updated adaptor set suitable for a wide variety vehicles. Supplied in carry-case.

8 mm 1/2" Dr. Stud Extractor, 50922-8

Designed for removing studs without damaging the threads.
Safe clamping due to 3 rollers. The extractors are the concentric roller bearing type that won't damage the thread on the stud.
Material: Cr-V
1/2" Drive (Hex 21mm).
Size: 8 mm.

Made in China

5 Pcs Ball Joint Separator, 50435

Content:
Ball Joint Separator
Tie Rod And Ball Joint Remover
Conical Pitman Arm Puller
Pitman Arm And Tie Rod End Puller
Pitman Arm Puller

Description:
Ball Joint Separator - For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles adjustable for different size ball joints
1-1/8" & 2-1/8" (30 & 56mm) maximum opening capacity
7/8" jaw spread, 2-1/4" throat depth
Tie Rod And Ball Joint Remover - A universal heavy-duty puller that removes a wide range of tie rods and ball joints from a variety of cars, trucks, SUVs and heavy-duty vehicles.
0 to 2-1/2" jaw spread, 3-1/4" throat depth
Conical Pitman Arm Puller - Designed to fit securely on Pitman arms for compact and mid-size cars.
3/4-16 x 4-3/4" forcing screw provides enough power to remove stubborn pitman arms.
Pitman Arm And Tie Rod End Puller - This versatile tool can be used as a pitman arm remover for many small, domestic rear-wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. The jaws, with a spread of 1", give a secure positive grip in tight workspaces.
1-1/8" jaw spread, 2-1/8" throat depth
Pitman Arm Puller - This puller will handle nearly any pitman arm job on passenger cars and light trucks. It features special forged jaws, shaped to fit most models, keeping a solid grip while you work.
1-11/32" jaw spread, 2-1/2" throat depth

Made in China

3 Jaws Gear puller 10”, 50742E

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 10”

Made in China