Magma

M12x2.0 Spindle for Press and Pull Sleeve Kit, 50092-2

Pulling spindle with nuts and thrust bearings.

Size: M12x2.0 mm

Length: 350 mm

Material: carbon steel

Made in China

Brake Piston Wind Back Tool, 50066

Specifications:
Chemically blackened steel spreader plates
Suitable for most ATE, Bendix, Delco, Brembe and Girling calipers
Fitted with tommy bar
Chrome screw with linking bar
Capacity: 0 ~ 2.5" (0 ~ 65mm)
Applications:  Alfa, Audi, Fiat, Ford, Nissan, GM (Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche. The list is endless...

Replacement Grinding Wheel, 51275

Made of silicon carbide abrasive.
No sparks and minimum dust development.
Outer Diameter: 150mm.
Inner Diameter: 90mm.
Maximum speed: 4000 rpm.
Suitable for Aluminium Wheel Hub Grinder 150mm MG51274.

Made in China

1/2” Dr. E20 Cylinder Head Wrench-Man, 50811

Features: For loosening and fastening cylinder head screws. Removing the injector no longer necessarily.
Ideally suited for commercial vehicles.
Profil: E-Torx.
Drive: Square, 1/2".
Applicable: MAN series F2000 / F90 / F8, MAN buses with D25 and D28 engines.

Made in China

M10x1.5 Spindle for Press and Pull Sleeve Kit, 50092-1

Pulling spindle with nuts and thrust bearings.

Size: M10x1.5 mm

Length: 350 mm

Material: carbon steel

Made in China

3 pcs Universal Impact joints, 50468

Full 360 degree swivel feature allows use to easily access odd angles and hard to reach areas.
Made of heat treated black chrome steel for outstanding durability and durability when working with pneumatic tools.
Material: Cr-Mo
Size: 1/4 "Dr., 3/8" Dr., 1/2 "Dr.

Made in China

Timing Tool Kit - BMW MINI ONE/COOPER/COOPER S, 50300

Specifically designed for pre 2009 petrol chain driven engines  Mini One/Cooper and Cooper S models. Also fits JC works and convertible variants
Contents:
Camshaft Sprocket Holding Tool – OEM No. 11 8 250
Engine Support Bracket – OEM No. 11 8 370
Tensioner Assembly Tool  - OEM No.  11 8 240
Screw: 2 x M12 x 1,75 mm
Screw:  1 x M12 x 1,50 mm

Applicable:
BMW Mini One 2001-06(W10B16AA)
BMW Mini Cooper 2001-06 (W10B16BA)
BMW Mini Cooper S 2002-06 (W11B16AA)

2002-06 Mini Cooper Coupe - R50 Chassis - W10 Engine
2005-08 Mini Convertible Regular - R52 Chassis - W10 Engine
2005-08 Mini Convertible Cooper S - R52 Chassis - W11 Engine
2002-06 Mini Cooper S Coupe - R53 Chassis - W11 Engine Engine Code
BMW Mini: W10; W11; N12B14AB; N12B16A; W10B16AA; W10B16BA; W11B16AA; R50; R52; R53; R55; R56; R57

Made in China

Left handed thrust bolt, 50071

The Left Handed Thrust Bolts Are Suitable Renault, Espace, Citroen C5, Ford Mondeo, Mazda

Made in China

24mm Oil Filter Wrench For DSG Gear Oil Change, 50845
 
Features: For operation of the oil filter housing cover when changing the oil filter insert on the DSG gearbox.
Applicable: VW and VAG group vehicles.
No removal of batteries or battery holders.
VW specification: DSG oil change within the inspection interval.
Drive: Square, 1/2".
Output: Outside 12-point profile.
Wrench size: 24mm.
Length: 199 mm.

Made in China

Camshaft/Crankshaft alignment tool – Volvo, 50340

Contents:
Press tool – OEM No. 9995454
Holder – OEM No. 9995453
Camshaft alignment tool – OEM No. 9995452
Crankshaft TDC Timing pin – OEM No. 9995451
Applicable: Volvo models 850, 960, S40, S70 and S90

9 pcs Panel beating set, 50926

Made of high-grade high-carbon steel.
It contains 4 models of ergonomic grippers, as well as adapters, necessary to straighten the car's dents.
N.W. : 9.7 kgs

Made in: China

28 pcs Press and sleeve master kit, 50605

Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmerrings, ect.

Universal use for automobile, truck, municipally, country and forestery technology, ect.

Contents:
4 x step discs
4 x pulling spindle and nuts
8 x thrust bolts M10, M12, M14, M16,
20 x pressure sleeves:
Ø 44x34 mm; Ø 46x36 mm; Ø 48x38 mm;
Ø 50x40 mm; Ø 52x42 mm; Ø 54x44 mm; Ø 56x46 mm; Ø 58x48 mm
Ø 60x50 mm; Ø 62x52 mm; Ø 64x54 mm; Ø 66x56 mm; Ø 68x58 mm
Ø 70x60 mm; Ø 72x62 mm; Ø 74x64 mm; Ø 76x66 mm; Ø 78x68 mm;
Ø 80x70 mm; Ø 82x72 mm

Made in China

Internal snap ring pliers (Long arm), 50760

• 90° internal bent nose circlip pliers.
• For removing and installing the snap rings on hydraulic master cylinders on motorcycles.
• Spring loaded action for ease of use.
• Moulded handles for easy comfortable use.

Mercedes-Benz OM654 - Engine Timing Tool Set, 51106

Applicable: A Class (from 2019), B Class (from 2019), C Class (from 2018), CLA (from 2019), CLS (from 2018), E Class (from 2016), GLB (from 2019), GLC Coupe (from 2019), GLE (from 2019), V Class (from 2019) and Vito (from 2019).

Engine codes: 1.6L 654.916 and 2.0L 654.920.

OEM No.: W654 589 00 40 00, W654 589 01 40 00 and W654 589 00 21 00.

Made in China

16 Pcs Bearing extractor set with slidding hammer, 50148

For removal of Pilot Bushes Bearings etc.
Form blind housings.
One Slide hammer assemble 2.5 jaws.
Made of ultra strong Cr-Mo material
For proffesional use.
Specification:
Thread: M10×1.5; M10×1.5 to M8×1.25, M10×1.5 to M6×1.0
Collects size: 6-13mm; 10-17mm; 15.5-22mm; 22-29mm; 28.5-35mm; 35.5-39mm; 38.5-45mm; 42.5-49mm; 48.5-55mm; 52.5-59mm
Contents:
1x Sliding Hammer Assy
1x 2 Claw Puller Assy
3x Screw Adaptors
10 X Collects
1 X Counter Stay Puller

Made in China