Magma

• Application: Designed for crimping cables and wires with sizes from 6 mm² to 70 mm² (square millimeters).
• Pressure/Force: The tool typically applies a force of 5 to 8 tons (70 kN).
• Made in China

Seal Puller 50107

Used to remove oil and grease seals
Two different size tips enables this tool to accommodate most applications.

Made in China

Thread repair set M14x1.5, 50725K

Features: This thread repair kit creates a stronger internal thread in soft metals.
Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bit, thread tap, insert installations (heli-coil - 10 pcs) and lug breaking tool.
Size: 14x1.5

10 pcs Tube flaring tool set, 50703

For metal tubes and pipes with a wall thickness of 0.7 and 1.0 mm.
Pipe diameter 4.75 - 10 mm.
For open (F) or double (E) flares according to DIN 74234, for normal 90° and 180° flares.
For flares on rolled and drawn pipes.
With replacesble hinged griping jaws.

Seal Puller, 50108

Double Hook with joint for removal of shaft gaskets.
Quick and easy disassembly with 320 mm lever.
Lever adjustable in five positions of up to 45°

Made in China

Mercedes Benz Ball Joint Remover Installer Set, 50453

Spesialized 10-Piece tool kit to service all of the pressed-in ball joints incorporated in the Mercedes W210 / W211 / W220 / W230 / W163/ W164 suspensions.
This tool set allows servicing (installation and removal) of the specified ball joints on the vehicle. This saves tremendous time and effort by avoiding the necessity of disassembling the brake system and other suspension components that would disturb suspension alignment.
Includes:
C-Clamp press tool forged (not cast) form SCM440 Steel (HRC 38-42 hardness)
Front Suspension Ball Joint press fixtures for W220 / W211 / W230 Chassis - used in Conjunction with the C-Clamp Press.
Front Sway Bar Ball Joint (pressed into control arm) press fixtures for W220 /
W211 - used in Conjunction with the C-Clamp Press.
Front & Rear Suspension Ball Joint press fixtures for W163 / W164 Chassis - used in Conjunction with the C-Clamp Press.
Ball joint socket (4-prong) for servicing front ball joint on W163 / W164 Chassis
Application: Mercedes Benz
W210 Chassis - 1995-2002 E Class
W211 Chassis - 2002-2009 E Class
W220 Chassis
W230 Chassis
W163 Chassis - 1998-2005 M Class
W164 Chassis - 2006-present M Class

Made in China

2 Pcs Car Door Panel Trim Upholstery Clip Remover Tool, 50935

For easy remove door panel clips, upholstery, and trim without damage.

Convenient extended handle.
Made of heat-treated carbon steel.
Overal lenght: 240 and 260 mm

Made in China

M14x1.5, 10pcs Helicoil thread inserts, 50727J

Description:
Precisely shaped stainless steel wires with diamond-shaped cross-section.
Easy way to recover threads or create new ones.
Made of corrosion-resistant stainless steel.
Size: M14x1.5

Made in China

18 Pcs 1/2" Drive Wheel Nut Socket Set, 51168

A Professional-grade solution designed for the safe and efficient removal of standard, damaged, and locking wheel nuts. Each socket is equipped with a protective plastic sleeve to prevent scratches and damage to alloy wheels during operation.

This comprehensive set includes double-ended twist sockets, specifically engineered for removing damaged nuts and bolts, as well as locking wheel nuts. The double-ended wheel nut sockets are ideal for situations where the chrome cap is missing or damaged, ensuring a secure grip and easy removal.

Manufactured from high-quality chrome molybdenum (Cr-Mo) steel, the sockets offer exceptional strength, impact resistance, and long service life. Designed for use with 1/2" drive impact tools, this set is suitable for professional workshops, tire service centers, and demanding home users.

GM 1.0 / 1.2 12V - Engine Timing Tool Set 51287

Features:  For GM 1.0 12V (3-cylinder), 1.0 12V (3-cylinder) turbo and 1.2 12V (3-cylinder) turbo Ecotec / CSS Prime petrol engines.
Applications:
Chevrolet: Onix 1.0 / 1.0 turbo (2019-), Onix Plus (sedan) 1.0 / 1.0 turbo (2019-), Montana 1.2 turbo (2022-), Tracker 1.0 turbo / 1.2 turbo (2020-)
Buick: Encore GX (2020)

OEM# tools: EN-52457, EN-52458, EN-52476

Made in China

Coil Spring Compressor For Wishbone Suspensions, 50452

Suitable to work on lower supports with a small access (< 30 mm)
Suitable for more coil springs - Working range: 95 - 220  mm
100Nm Extension torque bar controls excessive torque being applied
Holder discs with wide application
Applicable to vehicles with a swing arm diameter of 30 mm and bigger.
Applicable:
Chrysler, Citroen, Ford, Honda, KIA, Mitsubishi, Peugeot, Renault, Seat, Skoda, Suzuki, Toyota, Volvo, Volkswagen,  etc.
BMW 3 series (1996-2013)
Mercedes Benz W202/ W204 (1997-2013)
Includes:
150 mm steel pressure plate
130 mm steel pressure plate
Compressing bar
Extension bar with 100 Nm torque control for use with impact wrench.

Made in China

10 Pcs Double Flaring Tool Set 51245

Designed for double or single flare in soft copper, brass and aluminium tubes.
Set contains:
1pc Flaring Bar
1pc Tube Cutter 1/8" ~ 1-1/8"
7pcs Flaring Adapters: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"
1pc 45° Flaring Cone

Made in China

19 Pcs Air Hammer Kit, 93988

Track Rod Hammer
5mm Hammer
1/2" Dr. Adaptor Hammer                                                                            
63mm Large Concave Hammer
38mm Medium Flat Hammer
74mm Large Flat Hammer                                    
Air Hammer                                                       
impact ball joint separator, 7"X 24mm, 7" X 20mm
Point Chisel                                                      
20mm Flat Chisel                                                    
38.5mm Diameter Body                         ·
Smoother Hammer              
Impact exhaust slitting chisel ( bend )                                    
Pneumatic Plug insertion needle φ4mmX152mmL      
29mm Polyoxymethylene(POM) Hammer
29mm Copper Hammer                                         
29mm Aluminum Hammer                                      
29mm Track Rod Hammer

5 Pcs Ball Joint Separator, 50435

Content:
Ball Joint Separator
Tie Rod And Ball Joint Remover
Conical Pitman Arm Puller
Pitman Arm And Tie Rod End Puller
Pitman Arm Puller

Description:
Ball Joint Separator - For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles adjustable for different size ball joints
1-1/8" & 2-1/8" (30 & 56mm) maximum opening capacity
7/8" jaw spread, 2-1/4" throat depth
Tie Rod And Ball Joint Remover - A universal heavy-duty puller that removes a wide range of tie rods and ball joints from a variety of cars, trucks, SUVs and heavy-duty vehicles.
0 to 2-1/2" jaw spread, 3-1/4" throat depth
Conical Pitman Arm Puller - Designed to fit securely on Pitman arms for compact and mid-size cars.
3/4-16 x 4-3/4" forcing screw provides enough power to remove stubborn pitman arms.
Pitman Arm And Tie Rod End Puller - This versatile tool can be used as a pitman arm remover for many small, domestic rear-wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. The jaws, with a spread of 1", give a secure positive grip in tight workspaces.
1-1/8" jaw spread, 2-1/8" throat depth
Pitman Arm Puller - This puller will handle nearly any pitman arm job on passenger cars and light trucks. It features special forged jaws, shaped to fit most models, keeping a solid grip while you work.
1-11/32" jaw spread, 2-1/2" throat depth

Made in China

Brake Piston Wind Back Tool MG50407 – Universal

Function: Easy retraction of rear brake caliper pistons.
Type: Right-handed thread mechanism.
Compatibility: Fits most Japanese and European vehicles.

•    European: VW (Golf, Passat), Audi, Skoda, Seat, Opel, BMW, Ford и др.
•    Japanese: Toyota, Honda, Nissan, Mazda, Mitsubishi.

Set Includes: Rewind tool, double-sided adaptor, and reaction plate. Distance between pin centers: 22 mm and 32 mm.

Made in China