Magma

2" Replacement stones for Cylinder Hone, 50720

3 pcs set, for Standard engine cylinder hone

Hone lenght: 50 mm

Made in China

5 pcs Trim fastener and molding removal set, 50241

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

1 Litre Solvent Pressure Sprayer 51174

Designed for various liquids containing organic solvents, such as brake cleaner (ACETONE-FREE), degreaser, tyre shine, detergents and specialised lubricants, etc.
Suitable for liquids with a PH-value from 3 to 9.
With FKM seals and gaskets. FKM is a type of synthetic rubber known for its exceptional resistance to heat, chemicals, and oils.
Bottle material: High-density polyethylene (HDPE).
Pump material: Polypropylene (PP).
Max. operating pressure: 3 bar.
Max. operating temperature: 40 °C
Max. flow rate: 300 ml/min.
Capacity: 1 Liter.

Made in China

Mercedes-Benz Ignition Lock Removal Tool, 50765

Features: Designed to remove and replace ignition switch trim ring.
Applicable: Mercedes-Benz W129, W140, W202, W210, W220, W203, W209, W211, W204

Made in China

2 pcs Heavy Duty Spring coil compressor kit, 50168

Features adjustable safety bar for additional security and compressors have lower safety jaws for ultimate peace of mind.
Hook engage spring can be compressed by turning hex nut.
Maximum capacity per pair: 1200kg.
Use with 19mm hex socket or wrench. 
Jaws capacity: 23mm-280mm.
Length 280mm.
Made of durable material for added strength.

Made in China

Camshaft Locking tool VW, Audi, Seat, Skoda - 1.4; 1.6 FSI, 50360

Features: For 1.4 & 1.6 16V / 1.4 & 16 FSI petrol  engines (1997 on)
Suitable for VW 1.4 and 1.6 twin camshaft twin belt engines introduced in 1997
Depending on engine type, either the complete bridge and pins or the pins alone may be used
Applicable:
Audi : A2 1.4 (00-06)
Seat: Arosa 1.4 (99-05), ; Cordoba 1.4 (99-08); Ibiza 1.4 (99-08); Inca 1.4 (00-04); Leon 1.4, 1.6 (99-05), Toledo 1.4, 1.6 (99-05)
Skoda: Fabia 1.4 (99-05) ; Octavia 1.4 (99-05)
VW : Beetle 1.4, 1.6 (01-08); Bora 1.4, 1.6 (97-08); Caddy 1.4, 1.6 (99-08); Golf 1.4, 1.6 (97-08); Lupo 1.4, 1.6 (98-05); Polo 1.4, 1.6 (98-07) ...

1-1/8" Cylinder Hone Three arms ø20-64mm, 50717

With three legs
Suitable for small brake cylinders.
Stone size: 28.5 mm (1-1/8”)
Capacity: ø20-64 mm (3/4” – 2-1/2”)

Made in China

Diesel injector sealing ring puller, 50566

Features: Slide hammer action easily removes diesel injector copper ring seals
Tapered point screws into the seal, locking it to the tool
Hammer action extracts the copper ring seal even when there is carbon build up
Extracts the sealing rings from between the injector nozzle & the cylinder head without damaging the injector recess or head.
It's designed to remove of sealing rings with internal diameter 4 to 16 mm
Applicable: Ideal for Mercedes & many other diesel engines that use copper injector ring seals

Made in China

30mm Ball Joint Separator Tie Rod End Removal Puller, 50792

Used to dismount steering and suspension ball joints.
Applicable: Mazda 6, Audi, Mercedes-Benz ect.
Jaw opening: 30 mm.

Made in China

1-1/8" Cylinder Hone Twin Leg ø20-64mm, 50716

Flexible drive shaft and adjustable cutting control.
Fitted with 28.5mm(1-1/8") medium grade stones with adjustable capacity from ø20-64mm.
Suitable for small brake cylinders.

Flexible Magnetic Pick Up Claw, 50519

Length: 24".
Magnetic power: Approx 1kgs

Made in China

Pneumatic Injector Puller Set, 51107

Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.

.Made in China

32mm Universal ball joint separator, 50050

This tool is used to separate the ball joint from the spindle support arm
Jaw size: 32 mm
Max Jaw opening: 85mm

Made in China

1-1/8" Replacement stones for Cylinder Hone, 50718

3 pcs set, for Standard engine cylinder hone

Made in China

1/2"Dr. 22mm Oxygen Sensor Socket, 51082

Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 22mm

Made in China