Magma

Diesel Fuel System Priming & Bleeding Kit – 51295

Universal kit for priming and bleeding diesel fuel systems.

Compatible with Renault, Ford, GM, Fiat, Citroen, Peugeot, and more.

Made in China

1/2"Dr. 70-350 Nm Torque Wrench, 51395

Description:

Heavy-duty 1/2" drive torque wrench with a 70-350 Nm range.
Features ±4% accuracy, a 45-tooth reversible ratchet, and a knurled aluminum handle.

Made in China

High-precision dial bore gauge with a range of 50-160mm and 0.01mm graduation. Ideal for measuring internal diameters, cylinder taper, and out-of-roundness. Includes a set of interchangeable anvils and spacers in a protective case.

Professional universal engine and gearbox support. Ideal for under-vehicle work on a lift during clutch, timing belt, or transmission replacement. Provides stability, precise adjustment, and complete freedom of movement within the engine compartment. High-quality heavy-duty tool designed for professional automotive workshops.

Purpose: Designed for holding dial indicators and lug back indicators during precision measurements. Ideal for checking the alignment of machine tools, measuring run-out on shafts, and general workshop inspection where a stable, switchable magnetic mount is required.

Rechargeable LED Headlamp with Dual CCT Sensor, 75134

Max. 550 lm, 8W COB LED, 4000K and 7000K.
Mode: 7000K COB 100%; 4000K COB 100%; 4000K & 7000K COB 100%
Operating time from 2.5 to 4 hours.
Charging time 3 hours.
1 × Li-battery 3.7 V, 1800 mAh
IP 44.
Type-C connector

Origin: China

Combustion Gas Leak Tester Kit, 51111

Designed for testing the presence of CO² in the cooling system.
CO² in the cooling system can indicate a cylinder head gasket leak, cracked block, warped head, etc.
For use on water-cooled petrol and diesel engines.
Set contains:
1x Leak Detector
1x Rubber Bulb Pump
1x Release Valve and Connector
3x Cooling System Bayonet Adapter
2x Empty Bottle (250 ml)

Made in China

14mm 1/2"Dr Injection Line socket, 50802-14

Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for BMW Diesel engines
Material: Cr-V
Size: 14 mm

Made in China

510 mm (20") 1/2 "Dr. Extension bar, 50001

Lenght: 510 mm
Drive: 1/2” Dr.
Material: Cr-V

Made in China

280 mm (11") 1/4 "Dr. Extension bar, 50001B

Lenght: 280 mm
Drive: 1/4” Dr.
Material: Cr-V

Made in China

17 Pcs Go-Through Socket Set, 51101

Suitable for Hex, Square, 12-Point, Spline, Torx nuts and bolts.
Set contains:
13 pcs Go-Through Socket: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 mm
1 pcs 19mm Go-Through Ratchet Handle
1 pcs 19mm (F) x 3/8" (M) Quick-Release Adapter
1 pcs 19mm (F) x 1/2" (M) Quick-Release Adapter
1 pcs 75mm Go-Through Extension Bar
Material: Cr-V
Chrome plated

Made in China

3/4" Dr. 17 mm 12-pt Impact deep socket, 50479

Material:  Cr-Mo
12-points
Deep:  110 mm
Applicable: For Mercedes trucks cylinder head screw.
For models MB400, MB420, MB500

Made in China

29 pcs 1.5 - 13mm HSS Cobalt drill set, 50204

Made of high performance high speed steel (HSS) with cobalt.
Sharpening angle 135 °.
Resistant to overheating and wear. Suitable for hard, heat-resistant cast steel, stainless steel, cast iron, etc.
Drills can be re-sharpened without affecting their performance.
The set included: 1.5mm, 2mm, 2.5mm, 2.8mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5.2mm, 5.5mm, 6mm, 6.5mm, 6.8mm, 7.2mm, 7.5mm, 8mm, 8.5mm, 8.8mm, 9.2mm, 9.5mm, 10mm, 10.5mm, 10.8mm, 11mm, 11.5mm, 12mm, 12.5mm, 13mm

Made in China

Engine oil pressure tester set, 50193

Features:
Dual Gauge Readings: 0~100psi, 0~7bar
Contain 3 brass adapters: 1/8", 1/4", 3/8"
60cm/ 24" rubber pipe protects the gauge from damage
78mm diameter gauge with dual scale, easy to read
Perfect for most cars, trucks, vehicles, most engines to check oil pressure

Made in China

26 mm Heavy-Duty Open End Slogging Spanner Wrench, Carbon Steel – MG51580

Extra heavy-duty 26 mm open-end slogging wrench engineered for high-torque industrial, marine, and automotive repair work.
Forged from durable carbon steel with 34–40 HRC hardness and a reinforced striking anvil end.

Made in China