Magma

Brake Piston Wind Back Tool MG50407 – Universal

Function: Easy retraction of rear brake caliper pistons.
Type: Right-handed thread mechanism.
Compatibility: Fits most Japanese and European vehicles.

•    European: VW (Golf, Passat), Audi, Skoda, Seat, Opel, BMW, Ford и др.
•    Japanese: Toyota, Honda, Nissan, Mazda, Mitsubishi.

Set Includes: Rewind tool, double-sided adaptor, and reaction plate. Distance between pin centers: 22 mm and 32 mm.

Made in China

10 ton Hydraulic gear jaw bearing separator puller kit, 50457

Features:
Multifunctional gearbox for removal of gears and bearings. Included in the kit are separator  and three size brackets for three-ball bearings. It is suitable for a wide range of vehicles.
Contents:
10 Ton Hydraulic Ram
Twin Head Adapter for using as a 2 jaw puller
Triple Head Adapter for using as a 3 jaw puller
Two-way Cross Beam
3 x Gear Puller Legs/Jaws 100mm (4'')
3 x Gear Puller Legs/Jaws 150mm (6'')
3 x Gear Puller Legs/Jaws 200mm (8'')
2 x Main Rods
2 x Extension Rods
Center Extension Adapters 20 - 35 - 85mm
Bearing Separator 75-105 mm ...

Mercedes Benz Ball Joint Remover Installer Set, 50453

Spesialized 10-Piece tool kit to service all of the pressed-in ball joints incorporated in the Mercedes W210 / W211 / W220 / W230 / W163/ W164 suspensions.
This tool set allows servicing (installation and removal) of the specified ball joints on the vehicle. This saves tremendous time and effort by avoiding the necessity of disassembling the brake system and other suspension components that would disturb suspension alignment.
Includes:
C-Clamp press tool forged (not cast) form SCM440 Steel (HRC 38-42 hardness)
Front Suspension Ball Joint press fixtures for W220 / W211 / W230 Chassis - used in Conjunction with the C-Clamp Press.
Front Sway Bar Ball Joint (pressed into control arm) press fixtures for W220 /
W211 - used in Conjunction with the C-Clamp Press.
Front & Rear Suspension Ball Joint press fixtures for W163 / W164 Chassis - used in Conjunction with the C-Clamp Press.
Ball joint socket (4-prong) for servicing front ball joint on W163 / W164 Chassis
Application: Mercedes Benz
W210 Chassis - 1995-2002 E Class
W211 Chassis - 2002-2009 E Class
W220 Chassis
W230 Chassis
W163 Chassis - 1998-2005 M Class
W164 Chassis - 2006-present M Class

Made in China

6 pcs 3/4" Dr. Impact deep socket, 50476

Material: Cr-Mo
Contents:
3/4" Dr. TORX Impact deep socket : E18, E20, E22, E24
3/4” Dr. 12-pt Impact deep socket: 17 mm, 19 mm

Made in China

Camshaft/Crankshaft alignment tool – Volvo, 50340

Contents:
Press tool – OEM No. 9995454
Holder – OEM No. 9995453
Camshaft alignment tool – OEM No. 9995452
Crankshaft TDC Timing pin – OEM No. 9995451
Applicable: Volvo models 850, 960, S40, S70 and S90

Brake Piston Wind Back Tool, 50066

Specifications:
Chemically blackened steel spreader plates
Suitable for most ATE, Bendix, Delco, Brembe and Girling calipers
Fitted with tommy bar
Chrome screw with linking bar
Capacity: 0 ~ 2.5" (0 ~ 65mm)
Applications:  Alfa, Audi, Fiat, Ford, Nissan, GM (Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche. The list is endless...

Coil Spring Compressor For Wishbone Suspensions, 50452

Suitable to work on lower supports with a small access (< 30 mm)
Suitable for more coil springs - Working range: 95 - 220  mm
100Nm Extension torque bar controls excessive torque being applied
Holder discs with wide application
Applicable to vehicles with a swing arm diameter of 30 mm and bigger.
Applicable:
Chrysler, Citroen, Ford, Honda, KIA, Mitsubishi, Peugeot, Renault, Seat, Skoda, Suzuki, Toyota, Volvo, Volkswagen,  etc.
BMW 3 series (1996-2013)
Mercedes Benz W202/ W204 (1997-2013)
Includes:
150 mm steel pressure plate
130 mm steel pressure plate
Compressing bar
Extension bar with 100 Nm torque control for use with impact wrench.

Made in China

6 Pcs Torx 1/2" Dr. Impact Socket Set, 50067

Materal: Cr-Mo steel
Length: 44 mm
Size: T55, T60, T70, T80, T90, T100

Made in China

Camshaft sprocket puller for Ford, 50320

Features:
3 Legged puller specifically designed to remove the camshaft sprocket without causing damage to the pulley
Can also be used for pulling off the impeller
Applicable for Ford / Citroen / Peugeot and Mazda:
Ford: Focus (98- present 1.8D) CMax (1015), Courier (0002), Fiesta (0811), Fusion (0211), Focus (1115), Galaxy (0715), Kuga (1015), Mondeo (0615), SMax (0615), Tourneo Connect (0206), Transit Connect (0206)
Citroen: C3 III (1015), DS3 (1015), Xsara II (0015), Xsara Picasso (9910), C4 (0411), C4 II (1115), C4 Picasso/Grand Picasso (1015), C4 Air cross (1215), C5 (0005), C5 II (0408), C5 III (1015), DS4 (1115), Xantia (9801), Synergie/Evasion (9903), C8 (0215), Nemo (0810), Berlingo I/II (9911), Berlingo III (0815), Dispatch/Jumpy (9907), Dispatch/Jumpy II (0715), Relay/Jumper (0102)
Mazda: 2 (DE/DH) (0210)
Peugeot: 107 (0510), 1007 (0510), 206 (0109), 206CC (0507), 208 (1214), 306 (9902), 307 (0106), 307CC (0509), 308 (1114), 308CC (0914), 407 (0811), 407 Coupe (0712), 508 (1114), RCZ (1014), 2008 (1314), 3008 (1014), 4008 (1214), 5008 (1014), Bipper (0810), Partner/Partner Origin/Ranch I/II (0511), Partner III (0814),
Engine codes:
1.4D TDCi/Hdi: F6JA, F6JB, F6JC, F6JD, 8HP (DV4C), 8HR (DV4C), 8HS (DV4TED), 8HZ (DV4TD), 8HX (DV4TD), DV4C (8HP), DV4C (8HR), DV4TD (8HT), DV4TD (8HX), DV4TD (8HZ), DV4TED (9HS)
1.6D TDCi ECOnetic: HHJD
1.8D Turbo/TDCi: C9DC, RTN, RTP, RTQ, BHDA, BHDB, BHPA, C9DA, C9DB, C9DC
1.8 TDCi ECOnetic: KHBA
2.0 TDCi: AZBA, AZBC, AZWA, AZWC, G6DA, G6DB, G6DC, G6DD, G6DE, G6DF, G6DG, KLBA, LPBA, TXBA, TXDA,TXDB, TXWA, TYBA, TYDA, TYWA, UFBA, UFDB, UFWA, UKBA, UKBB, UKWA, UKDB, QXBA, QXBB
2.0 TDCi ECOnetic: KLBA, LPBA, TYBA
OEM 21-229, 303-651.
Engines Ford: Fiesta 1.8d TURBOB(98-), Focus 1.8d (98-).

Made in China

9 pcs Panel beating set, 50926

Made of high-grade high-carbon steel.
It contains 4 models of ergonomic grippers, as well as adapters, necessary to straighten the car's dents.
N.W. : 9.7 kgs

Made in: China

Introducing the Left Handed Thrust Bolt 50071, a must-have tool for specific vehicle models.

• Compatible with Renault, Espace, Citroen C5, Ford Mondeo, and Mazda.
• Expertly manufactured in China, ensuring quality and precision.
• Designed for efficient and effective performance.

37 PCS 1/4" Drive Go-Through Socket & Bit Set - MG51418

Versatile 37-piece tool set featuring a 72-tooth Go-through ratchet system  for Hex, Square, Spline, and Torx fasteners.

Made in China

Heavy Duty Lever Grease Gun, 75172

Compact design, light and comfortable to work with.
It is widely used in car repair shops, industry, production and others. industries for maintenance of agricultural, aviation, construction, etc. machines, as well as in shipping, etc.
Equipped with metal extension
Tank capacity: 400ml
Tank material: carbon steel with painted
Inlet size: 1/4 "
Features:
Working Pressure: up to 4,500 Psi/3 Bar
Burst Pressure: 10,000 Psi/6.8 Bar
Delivers Minimum: 1 oz. / 40 strokes
Loading way: 14 oz.
Cartridge 1 400 c.c.
Bulk. Capacity: 14 oz. / 400 c.c.

Made in China

5 Pcs Ball Joint Separator, 50435

Content:
Ball Joint Separator
Tie Rod And Ball Joint Remover
Conical Pitman Arm Puller
Pitman Arm And Tie Rod End Puller
Pitman Arm Puller

Description:
Ball Joint Separator - For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles adjustable for different size ball joints
1-1/8" & 2-1/8" (30 & 56mm) maximum opening capacity
7/8" jaw spread, 2-1/4" throat depth
Tie Rod And Ball Joint Remover - A universal heavy-duty puller that removes a wide range of tie rods and ball joints from a variety of cars, trucks, SUVs and heavy-duty vehicles.
0 to 2-1/2" jaw spread, 3-1/4" throat depth
Conical Pitman Arm Puller - Designed to fit securely on Pitman arms for compact and mid-size cars.
3/4-16 x 4-3/4" forcing screw provides enough power to remove stubborn pitman arms.
Pitman Arm And Tie Rod End Puller - This versatile tool can be used as a pitman arm remover for many small, domestic rear-wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. The jaws, with a spread of 1", give a secure positive grip in tight workspaces.
1-1/8" jaw spread, 2-1/8" throat depth
Pitman Arm Puller - This puller will handle nearly any pitman arm job on passenger cars and light trucks. It features special forged jaws, shaped to fit most models, keeping a solid grip while you work.
1-11/32" jaw spread, 2-1/2" throat depth

Made in China

7 pcs Auto body repair set, 50209

Made of high-grade high-carbon steel.
It contains 3 models of ergonomic grippers, as well as adapters, necessary to straighten the car's dents.
Contains:
1pc standard bumping hammer
1pc pick and finish hammer
1pc reverse curve hammer
1pc curved dolly
1pc utility dolly
1pc double end hand dolly
1pc shrinking dolly.
Made in China