23 pcs Wheel Bearing removal tool kit, 50075

This set reduces the chance of damage to hub and bearing
Also suitable for removing and installing large industrial bearings

Wheel Bearing Removal Tool Set 

For Wheel Bearings on Front Wheel Drive Vehicles 

For use with Impact Tools 

Reduces Chances of  Damage to Hub and Bearings


Drive shaft: 32& 38 mm
Drift sizas: 50, 55, 60, 64, 67, 70, 72, 74, 75, 78, 82, 84, 88 mm
Made in China

19mm 1/2"Dr Injection Line socket, 50802-19

Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for MERCEDES
Material: Cr-V
Size: 19 mm MERCEDES

Made in China

Universal ball joint puller, automobile, 23 mm, 50049

Specification:
External clamping width: 23 mm
Clamping depth: 65 mm
Width: 100 mm
Spindle length: 35 mm
Thread dimension: M14 x 1.5
Width across flats: 19 mm

Applicable:
For easy ejection of ball joint bolts, particularly for many cars from the following manufacturers: Audi, BMW, Fiat, Ford, Daimler-Chrysler, Opel/Vauxhall, Nissan, Toyota, VW, Volvo.

17mm 1/2"Dr Injection Line socket, 50802-17

Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for BMW, OPEL 2.5TD, MERCEDES
Material: Cr-V
Size: 17 mm BMW, OPEL 2.5TD, MERCEDES

Made in China

9 PCS Cap Oil Filter Wrench Set, 50641

Contents:
3/8”Dr. 27mm, 6PT.
3/8”Dr. 32mm, 6PT.
3/8”Dr. 36mm, 6PT.
3/8”Dr. 64.5mm, 14 flutes.

3/8”Dr. 88.8mm, 15 flutes.
3/8”Dr. 74.2mm, 14 flutes.
3/8”Dr. 86.6mm, 16 flutes.
63 to 83mm Аdjustable wrench.

Made in China

BMW M52TU/M54/M56 - Crankshaft Pulley Holding Tool, 50296

Features: For BMW 6 Cylinder Engine M52TU / M54 / M56
Tool is designed to hold the crankshaft pulley stationary while loosening or tightening the center screw.
It can safely remove the pulley and won't damage the pulley shock - proof function.

Application: BMW (M52, M54, M56).

Made in China

Manual Brake Fluid extractor 50789

Drains the brake fluid and bleeds the brake system

Tank capacity: 3l

Max. Pressure: 4.8 Bar (70Psi)

Made in China

Spark Plug Thread Repair Kit, 50261

Comprehensive and time saving kit of spark plug thread repair tools.
Especially suitable for the repair of deep -seated plug configurations.
Incorporates taper  M 14хP1.25/М 15.8xP1.25 and plug taps M 14x1.25 HSS together with integrated ream.
Stepped tap ensures correct alignment of cutter in existing spark plug hole.
Extension tools allow easy access to the bottom of the plug recess.
Includes set of plug inserts M14x1.25: 10 pcs L10mm and 10 pcs L15 mm

Made in China

CV Joint Assembly Removal Tool, 50044

Description:
- For removing CV joints on front wheel drive cars without removing the drive shaft
- Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip
- A robust tool for front wheel drive cars
- Suitable for most vehicle
- Removes CV joints without removing drive shaft
- Time saver
- Essential service tool
- Phosphate Coated for long heavy duty service life

CV Joint clamp banding tool, 50690
Use to install and tighten the "band-it" or strap style clamps on CV joint boots or on power steering rack and pinion steering gear boots.
Once installed into the tool tighten the band by turning the handle on the tool;
Use a socket or wrench on the handle to torque the band to OE specifications.
When the boot clamp has been tightened to specs cut the band to the correct length by flipping the lever (at the front of the tool) forward.
Features:
CV joint boot clamp wrench securely fastens band-it style free-end clamps
Roll band clips and pre-formed CV boot clamps
Use by turning the winding mandrel with a 1/2-inch socket or wrench
Measures 11-1/2 inches long
Works on All CV Boot Clamps, ATV,  UTV and some automotive applications.

Magnetic welding holder, 50202
The design of the magnet is "ARROW". This allows you to work at different angles while welding. It can be used for angles of 45 °, 90 ° and 135 °.
Size:
3" – Capacity 11 kgs. (25 lb.)
4" – Capacity 22 kgs. (50 lb)
5" – Capacity 34 kgs. (75 lb)

Injector Seat and Shaft Cleaning Tool Kit, 50883

It contains a set of tools that ensure effective cleaning of the injector hole and the surface of the bed before inserting the new nozzle. It is used in a wide range of vehicles.
Suitable for Fiat Citroen BMW Peugeot Renault and Mercedes-Benz
Includes:
4 pcs cleaning brushes, brush holder, 3 pcs injector seat mill, cutter guide, sealing ring puller, brush holder extension injector seat and shaft cleaning kit, Note: only use brushes clockwise.
3 pcs conical sleeves for the guide pin 17 / 18.4 / 19 mm.
Guide bolts for sealing seat mills with 19 mm external hexagon head.
3 pcs milling heads:
15 x 19 mm diameter - Mercedes CDI
17 x 17 mm diameter - BMW, Peugeot, Citroen, Renault for Delphi / Bosch injectors
17 x 17 mm diameter 30° bevelled -  Fiat and Iveco sealing ring extractor.
Joint shaft with 6.3 mm (1/4 inch) hex bit holder for drill holders, for brushes with 6.3 mm (1/4 inch) hex bit holder.
2pcs  brush heads with 19.5 mm diameter, 2 pcs long, thin brushes for nozzle needle shaft.
6 pcs guide plugs for closing the nozzle needle shaft with holder for removal and installation.

Made in China

Volvo 2.0 - Diesel Engine Timing Tool Kit, 50983

Features: To lock and hold the crankshaft and high pressure fuel pump on the current range of Volvo 2.0L diesel engines in the method specified by the manufacturer.
The kit includes all the special tools required to time the engine when performing a timing belt change.
Applications: Volvo S60 (2011-2018), S80 (2007-), S90 (2017-), V40 (2013-), V60 (2011-2018), V70 (2008-), V90 (2017-), XC40 (2017-), XC60 (2014-), XC70 (2008-), XC90 (2016-).
Engine codes: D4204T11, D4204T12, D4204T14, D4204T16, D4204T17, D4204T20, D4204T23, D4204T4, D4204T5, D4204T6, D4204T8, D4204T9.

OEM No.: 999 7495, 999 7233

Made in China

4 pcs Magnetic welding aids, 50203

45 / 90 / 135 degree angles

Size: 5x6 sm

Load capacity: 1.5kg

Ford Transit 2.0TDCi - 32mm Diesel Fuel Filter Socket, 50980

Features: Used for remove and install th fuel filter on Ford EcoBlue 2.0 TDCi diesel engines from 2016. Cut out in the socket clears the fuel drain valve.
Size: 1/2"Dr.; 32 mm 6-pt.
Material: Cr-V (Chrome Vanadium)
Application:
Ford Transit Custom MK8 2.0TDCi 2016 onwards.

Made in China