Magma

1/2"Dr. 19mm Oxygen Sensor Socket, 51081

Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 19mm

Made in China

17 mm 1/2" Dr. Twist socket, 50927-17

Designed for removing damaged nuts and bolts, and especially for locking wheel nuts.
Material: Cr-Mo
1/2" Dr.
Size: 17 mm.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

1/2"Dr. 17mm Oxygen Sensor Socket, 51080

Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 17mm

Made in China

Fuel Injection test kit, 50195

Description:

12 mm 1/2" Dr. Stud Extractor, 50922-12

Designed for removing studs without damaging the threads.
Safe clamping due to 3 rollers. The extractors are the concentric roller bearing type that won't damage the thread on the stud.
Material: Cr-V
1/2" Drive (Hex 21mm).
Size: 12 mm.

Made in China

BMW Drive Shaft and Differential Flange Nut Tool Set, 51019

Features:
For removing and installing of the drive shaft nut allows inserting of the rear differential pinon seal suitable for BMW vehicles with rear and four wheel drive.
Suitable for BMW E70, E90, E91, E92 with N54 B30 engine.
Contents:
Open end spanner 50 mm - OEM # 33 5 040 – For BMW E70, E88, E90, E91, E92
Flange holding tool - OEM# 23 0 020 – For BMW E70, E82, E88, E90, E91, E92, etc.
Multi-point ring spanner 65 mm – OEM# 33 5 050 – For BMW E70, E82, E90, E91, E92, E93
Multi-point socket 34T – OEM# 3 35 060 – For BMW E70, E82, E90, E91, E92, E93
Seal ring drift – OEM# 3 35 080 - For BMW differential: HAG 215 Sp, HAG 220kom, HAG 225kom, HAG type G

OEM#: 33 5 040, 33 5 050, 33 5 060, 33 5 080, 23 0 020

Made in China

10 mm 1/2" Dr. Stud Extractor, 50922-10

Designed for removing studs without damaging the threads.
Safe clamping due to 3 rollers. The extractors are the concentric roller bearing type that won't damage the thread on the stud.
Material: Cr-V
1/2" Drive (Hex 21mm).
Size: 10 mm.

Made in China

HGV Diesel Injection Nozzle Socket, 50825

Features:
Used to install and remove the diesel injection nozzle on MAN, Mercedes-Benz and Scania commercial vehicles.
Specially designed with window, toothed end and M14x1.5 pulling force screw.
Applicable: Mercedes-Benz CRD, MAN & Scania

Made in China

8 mm 1/2" Dr. Stud Extractor, 50922-8

Designed for removing studs without damaging the threads.
Safe clamping due to 3 rollers. The extractors are the concentric roller bearing type that won't damage the thread on the stud.
Material: Cr-V
1/2" Drive (Hex 21mm).
Size: 8 mm.

Made in China

4 Pcs Truck Diesel Injector Socket Set, 50650

Contains:
1 pc  Hex 32mm x 70mm x 4 teeth (with M14 x 1.5 receiver thread) for Mercedes-Benz, Neoplan and Setra.
1 pc 1/2"Dr. x 72mm x 4 teeth for Mercedes-Benz.
1 pc Hex 32mm x 120mm x 4 tooth for MAN and Mercedes-Benz.
1 pc 1/2"Dr. x 120mm x 3 teeth for MAN and Mercedes-Benz.
Also suitable for some Iveco, Scania and Renault commercial vehicles.

Made in China

23 pcs Wheel Bearing removal tool kit, 50075

This set reduces the chance of damage to hub and bearing
Also suitable for removing and installing large industrial bearings

Wheel Bearing Removal Tool Set 

For Wheel Bearings on Front Wheel Drive Vehicles 

For use with Impact Tools 

Reduces Chances of  Damage to Hub and Bearings


Drive shaft: 32& 38 mm
Drift sizas: 50, 55, 60, 64, 67, 70, 72, 74, 75, 78, 82, 84, 88 mm
Made in China

6 mm 1/2" Dr. Stud Extractor, 50922-6

Designed for removing studs without damaging the threads.
Safe clamping due to 3 rollers. The extractors are the concentric roller bearing type that won't damage the thread on the stud.
Material: Cr-V
1/2" Drive (Hex 21mm).
Size: 6 mm.

Made in China

Piston Ring Compressor 60-175 mm, 50091

With Safety valve Special spring steel
Ratchet type complete with hex spanner
Capacity: 60-175mm
Height: 150mm (6")

Made in China

Valve stem seal pliers, 50106

Use the reach into confimed area for removal of valve seal.
Serrated tip for better grasp of valve seal regardless of its configuration.

VAG 3.0 / 2.9 TFSI (EA839) - Engine Timing Tool Set, 51039

Features:
Designed to fix the camshafts in position when removing and installing the camshaft timing chains.
Suitable for VAG 6-cylinder 3.0, 2.9 4-valve TFSI (EA839) petrol engines.
Applications:
Audi: A6 (2019-); A7 (2018-); A8 (2019-); Q7 (2019-); Q8 (2019-); S4 (2016-); S5 (2016-); SQ5 (2017-); RS4 (2017-); RS5 (2017-)
VW: Touareg III (2018-)
Engine codes: CWGD; DECA; CZSA; CZSE; DLZA; DCBD; DCBE
OEM No. T40331

Made in China