Magma

Wheel bearing tools – 85 mm, 50432A

The hub bearing removal and installation kit with integrated flange serves for a seamless and quick replacement of the damaged generation bearing - 2 - 85 mm on all Volkswagen vehicles (Touareg & T5 with 16 ”wheels/ suspension, Transporter, Multivan). The convenience of this kit is that it can be used in a situation without having to remove the hub damper from the car. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Feature:
All tools in the kit are heat treated for strength and durability.
With this tool kit you can easily remove the bearings and other components.
These bearings are lightweight with a built-in flange.
They are also preloaded with a retaining bracelet that secures the bearing to the hub housing.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.

https://www.youtube.com/watch?v=pequSdvAJU0&feature=youtu.be

Contents:
5 Push pins
1 Pressure plate with 5 holes
1 Pair of half shells for dismantling
1 Pair of half shells for installation
1 Dismantling plate
1 Installation plate
L Type lever

Description: Precision 41mm 8-point low-profile socket for servicing motorcycle front fork caps. Ideal for Big Piston Forks (BPF) by Showa. Made from durable materials to ensure a perfect fit without rounding the edges of the aluminum caps.

Purpose: Essential tool for servicing modern sportbike forks. Designed specifically for the high-torque requirements of Big Piston Fork (BPF) caps while maintaining a soft touch on the finished aluminum surfaces.

20 PCS Oil Sump Drain Plug Key Set, 20019B

Suitable for sump plugs on engine, gearbox and back axle.
Contents:
Square Male Keys: 7, 8, 10, 11, 12,13, 14mm and 5/16"
Hex Keys: 8, 9, 10, 12, 14, 17mm
Square Female: 10mm
Triangular Key: 10mm PSA
Security Spline Key: M16
VAG Plastic Plug Bit
VAG Torx T45
Flexible Head Bar 200mm

Made in China

Front wheel bearing tools – 72 mm, 50432

This wheel hub bearing tools kit is ideal for the damage-free fitting and disassembling  of generation-2 bearings units on all common vehicles for Audi, Seat, Skoda and for Volkswagen vehicles. The convenience of this kit is that it can be used in a situation without the need to dismantle the shock absorber with the hub from the vehicle. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Characteristics:
All the tools in the kit are heat-treated for strength and durability.
With this tool kit, you can easily remove bearings and other components.
These bearings are lightweight with a built-in mounting flange.
They are also preloaded with a retaining brace that fixes the bearing in the hub body.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.
Contents:
1 pcs Pair of half shells for dismantling (72 mm)
1 pcs Pair of half shells for installation (72 mm)
2 pairs Screws to fix the half shells
1 pcs  Dismantling plate
1 pcs Installation plate
2 pairs 5 x Bolts (72 mm - 76 mm in length , 8,1 and 11,9 mm in Diameter)
1 pcs Screw M 20 x 2,0 with nut hex drive 22 mm
1 pcs High strength ball bearing fitted spindle, 30mm drive
1 pcs Pressure plate with 8 holes, 72mm,  (122 mm in diameter, 18 mm in width)
Applicable:
For Audi A1 ( from year 2011)
For Audi A2 ( built after 2000)
For Seat Ibiza ( from 2002 )
For Skoda Fabia ( manufactured since 2000 )
For VW Fox ( from 2005 )
For VW Polo ( from 2002 )

23 pcs Wheel Bearing removal tool kit, 50075

This set reduces the chance of damage to hub and bearing
Also suitable for removing and installing large industrial bearings

Wheel Bearing Removal Tool Set 

For Wheel Bearings on Front Wheel Drive Vehicles 

For use with Impact Tools 

Reduces Chances of  Damage to Hub and Bearings


Drive shaft: 32& 38 mm
Drift sizas: 50, 55, 60, 64, 67, 70, 72, 74, 75, 78, 82, 84, 88 mm
Made in China

Description: Specialized 38mm 8-point (octagon) socket designed for the safe removal and installation of front fork caps. Specifically engineered for Showa SDBV forks found on motorcycles like the Honda NC750. Prevents damage to delicate aluminum caps.

Purpose: Used for removing and installing the top fork caps on motorcycle suspension. The 8-point design ensures a precise fit on low-profile aluminum caps, preventing costly damage and scratches during maintenance.

1/2” Dr. E20 Cylinder Head Wrench-Man, 50811

Features: For loosening and fastening cylinder head screws. Removing the injector no longer necessarily.
Ideally suited for commercial vehicles.
Profil: E-Torx.
Drive: Square, 1/2".
Applicable: MAN series F2000 / F90 / F8, MAN buses with D25 and D28 engines.

Made in China

24mm Oil Filter Wrench For DSG Gear Oil Change, 50845
 
Features: For operation of the oil filter housing cover when changing the oil filter insert on the DSG gearbox.
Applicable: VW and VAG group vehicles.
No removal of batteries or battery holders.
VW specification: DSG oil change within the inspection interval.
Drive: Square, 1/2".
Output: Outside 12-point profile.
Wrench size: 24mm.
Length: 199 mm.

Made in China

Mercedes-Benz OM654 - Engine Timing Tool Set, 51106

Applicable: A Class (from 2019), B Class (from 2019), C Class (from 2018), CLA (from 2019), CLS (from 2018), E Class (from 2016), GLB (from 2019), GLC Coupe (from 2019), GLE (from 2019), V Class (from 2019) and Vito (from 2019).

Engine codes: 1.6L 654.916 and 2.0L 654.920.

OEM No.: W654 589 00 40 00, W654 589 01 40 00 and W654 589 00 21 00.

Made in China

10 pcs Motorcycle Flywheel Puller Set, 60023

A set of flywheel pullers used for separating the flywheel from the crankshaft taper.
Contents:
5 double ended pullers with sizes:
M28 x M26 (1.0 mm thread),
 M25 (1.25 mm) x M22 (1.0 mm),
M27 x M24 (LH) (1.0 mm),
M26 x M22 (1.5 mm),
M27 (1.25 mm) x M20 (1.0 mm)
2 single ended puller:
M28 x 1.5 mm,
M19 x 1.0 mm
Threaded bolts: M14 x 1.5 mm, M16 x 1.5 mm, M18 x 1.5 mm

Made in China

Fuel Injection test kit, 50195

Description:

• Application: Designed for crimping cables and wires with sizes from 6 mm² to 70 mm² (square millimeters).
• Pressure/Force: The tool typically applies a force of 5 to 8 tons (70 kN).
• Made in China

Ford 2.0 EcoBlue TDCi - Crankshaft Pulley Puller, 51118

Designed to remove the crankshaft pulley when accessing to the timing belt.
Suitable for Ford 2.0 EcoBlue TDCi diesel engines from 2016.
Applications: Ford Edge, Focus, Focus Active, Galaxy, Kuga, Mondeo, S-MAX, Transit, Transit Custom, Tourneo Custom.
Engine codes: BCCA, BCCB, BCCC, YLCA, YLCB, YLCC, YLDA, YLDC, YLF6, YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMF6, YMFA, YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6, YNRA.
OEM#: 204-158-01, 205-295

Made in China

Glow Plug Electrode Removal Tool Set M8 / M10, 51031

Features: Designed for removing broken glow plug electrodes.
Suitable for glow plug M8x1.0, M10x1.0, M10x1.25.
Contains:
2 pcs Tap: M3x0.5, M4x0.7
2 pcs Drill: 2.5x120mm, 3.3x140mm
2 pcs Thread Rod: M4x0.7x175mm
1 pcs Thread Rod: M3x0.5x175mm
3 pcs Extraction Nut
3 pcs Extraction Adaptor: M8x1.0, M10x1.0, M10x1.25
3 pcs Guide bolt: M8x1
3 pcs Guide bolt: M10x1.0
3 pcs Guide bolt: M10x1.25

Made in China

18 Pcs 1/2" Drive Wheel Nut Socket Set, 51168

A Professional-grade solution designed for the safe and efficient removal of standard, damaged, and locking wheel nuts. Each socket is equipped with a protective plastic sleeve to prevent scratches and damage to alloy wheels during operation.

This comprehensive set includes double-ended twist sockets, specifically engineered for removing damaged nuts and bolts, as well as locking wheel nuts. The double-ended wheel nut sockets are ideal for situations where the chrome cap is missing or damaged, ensuring a secure grip and easy removal.

Manufactured from high-quality chrome molybdenum (Cr-Mo) steel, the sockets offer exceptional strength, impact resistance, and long service life. Designed for use with 1/2" drive impact tools, this set is suitable for professional workshops, tire service centers, and demanding home users.