787
products
Products
Harmonic Balancer Puller And Installer Kit, 50030
Harmonic Balancer Puller And Installer Kit, 50030
- Carbon steel, hardened, zinc plated
- Universal use: adapters incl. 9
Install correct threaded adapter stud into the center screw and puller nut as shown. Screw into end of crankshaft. Position the pulle tool with bearing TOWARDS the crankshaft. Install two or three bolts (as required) thru the piate into the balancer. While holding the end of the center screw with a wrencn, turn the puller nut to remove balancer.
Install correct threaded adapter stud into the center screw and puller nut as shown. Position the balancer on the crankshaft as straight as possible. Position puller plate with booring facing AWAY from balancer. Turn puller nut to install.
Contents:
- 1 puller plate
- 12 screws, each 3 pieces:
3/8NC16 X 57 MM - 57 MM X 3/8NC24
M6 X 1.0 X 60 MM - M8 X 1.25 X 60 MM
- 1 center bolt 10 mm
- 9 adapters:
M12 X 1.5 - 3/8NC16
M14 X 1.5 - 3/8NC16
M16 X 2.0 - 3/8NC16
1 / 2 X NC20 - 3/8NC16
9 / 16 x nC18 - 3/8NC16
7 / 16 X NC20 - 3/8NC16
3 / 4 X NC16 - 3/8NC16
5 / 8 x nC18 - 3/8NC16
3 / 8 X NC16 - 3/8NC16
Made in China
VAG 1.6; 2.0 TDI High Pressure Pump Pulley Remover, 50283
VAG 1.6; 2.0 TDI High Pressure Pump Pulley Remover, 50283
Designed for removal of hub of high pressure pump on VAG 1.6L, 2.0L TDI engines VW, Audi, Seat, Skoda
Applicaion on 6-cyl. TDI common rail, 1.6L/2.0L common rail engine.
OEM#: T40064
Made in China
Universal Timing Pulley Puller 30mm & 50mm, 50248
Universal Timing Pulley Puller 30mm & 50mm, 50248
For removing 3, 6, 9 slots pulleys and camshaft sprockets without causing any damage.
The tool is adaptable to different pulley diameters, as the legs are adjustable.
Surface finish: chrome plated, screw blackened.
Spindle size: M14x1.5mm, hex 19 mm
Working range(diameter): 42 - 82 mm
Contains:
1 pc regulator
1 pc bracket
1 pc spindle
3 pcs hooks, 30mm
3 pcs hooks(extended), 50mm
3 pcs locking nuts
3 pcs screw M8x1.25, L50
3 pcs screw M10x1.5, L50
Made in China
VAG - Turbo Actuator Adjustment Set, 50751
VAG - Turbo Actuator Adjustment Set, 50751
This tool set is designed for the professional loosening, adjustment and tightening of the control rod when removing/installing the pressure capsule along with the charge pressure actuator position sensor on VAG 2.0L Common Rail Diesel engines.
Application:
Golf Ml V1 (2008 - 2013), Golf Plus (2004 - 2015), Jetta (2004 - 2010), Passat (2005 - 2010), Passat CC (2008 - 2012), Scirocco (2008 - 2017), EOS (2006 - 2015), Tiguan (2007 - 2018), Transporter T5 (from 2009).
Set contains:
1 Pc 1/4" Dr. Socket 10mm, OEM T10422
1 Pc 12pt Spanner 10 x12mm, OEM T10423
Made in China
Telescopic Inspection Mirror, 50238
Telescopic Inspection Mirror, 50238
Extends to a maximum length of 598 mm
Mirror diameter: 50 mm.
Length: min. 282 – max. 598 mm
Made in China
Oil Measuring Jug - 5 L, 50225-5
Oil Measuring Jug - 5 L, 50225-5
This oil measuring jug is resistant to oil, fuel and most acids.
Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages.
Complete with flexible spout.
Material: High-density polyethylene.
Capacity: 5 l
Made in China
9pcs Pick and Hook Set, 50208
9pcs Pick and Hook Set, 50208
Features:
Suitable for pin/clip picking, hose removal and gasket scraping.
Ergonomically styled handles for comfort, grip and accuracy.
Lengths: 165mm and 260mm
Contents:
4 x Short Picks with satin finished steel shafts
4 x Large Picks with black finished steel shafts.
1 x Large Scraper with black finished steel shaft.
Material: Alloy Steel
Made in China
Oil Measuring Jug - 3 L, 50225-3
Oil Measuring Jug - 3 L, 50225-3
This oil measuring jug is resistant to oil, fuel and most acids.
Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages.
Complete with flexible spout.
Material: High-density polyethylene.
Capacity: 3 l
Made in China
Oil Measuring Jug - 1 L, 50225-1
Oil Measuring Jug - 1 L, 50225-1
This oil measuring jug is resistant to oil, fuel and most acids.
Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages.
Complete with flexible spout.
Material: High-density polyethylene.
Capacity: 1 l
Made in China
6 Pcs Spiral Flute Screw Extractor Set, 50051A
6 Pcs Spiral Flute Screw Extractor Set, 50051A
Used to remove broken screws, bolts and studs.
Material: Cr-Mo
Contents:
M3-M6 (1/8"-1/4")
M6-M8 (1/4"-5/16")
M8-M11 (5/16"-7/16")
M11-M14 (7/16"-9/16")
M14-M18 (9/16"-3/4")
M18-M25 (3/4"-1")
Made in China
6 Pcs Broken Screw Extractor Set, 50051
6 Pcs Broken Screw Extractor Set, 50051
Used to remove broken screws, bolts and studs.
Material: Cr-Mo
Contents:
M3-M6 (1/8"-1/4")
M6-M8 (1/4"-5/16")
M8-M11 (5/16"-7/16")
M11-M14 (7/16"-9/16")
M14-M18 (9/16"-3/4")
M18-M25 (3/4"-1")
Made in China
4” Piston ring pliers, 50335A
4” Piston ring pliers, 50335A
Universal design - can be used on most vehicles.
Smooth gripping edge - to prevent damage to the piston rings.
Capacity: 50 - 100 mm
Made in China
Diesel/Petrol VAG 1.9; 2.4; 2.5, 2.7, 2.8 - Belt drive camshaft sprocket remover, 50329
Diesel/Petrol VAG 1.9; 2.4; 2.5, 2.7, 2.8 - Belt drive camshaft sprocket remover, 50329
Specially designed to remove amshaft sprockets with 5 and 6 spikes from Audi, Vw, Skoda vehicles.
Features ball and thrust screw to eduse damade to camshaft bolt.
Applications
Diesel engines:
1.9D SDi/Tdi: Audi; A3 (96-03), Seat; Ibiza/Cordoba (99-02), Leon (00-05), Toledo (99-05), Skoda; Octavia (97-06), VW; Beetle (98-04), Bora (97-05), Caddy (95-04), Golf (97-05), Polo (99-02)
2.5D Tdi V6: Audi; A4 (97-09), A6 (97-05), A6 Allroad (00-05), A8 (97-02), Skoda; Superb (02-08), VW; Passat (98-05)
2.5D TDiCR: VW; Crafter (06-12)
Engine Codes - Diesel:
1.9D SDi/Tdi: AGP, AGR, AHF, ALH, AQM, ASV
2.5D TDiV6: AFB, AKE, AKN, AYM, BAU, BCZ, BDG, BDH, BFC
2.5D TDiCR: BJJ, BJK, BJL, BJM, CEBA, CEBB, CECA, CECB
Petrol engines:
2.4, 2.7T, 2.8 V6: Audi; A4 (94-09), RS4 (00-02), S4 (97-01), A6 (95-05), A6 Allroad (00-05), A8 (96-10), Skoda; Superb (02-08), VW; Passat (96-05)
3.7, 4.2 V8: Audi; A6 (99-05), S6 (00-04), A8 (99-09), S8 (99-03), RS6 (03-05), VW; Touareg (03-07), Phaeton (03-15)
Engine Codes - Petrol:
2.4 V6: AGA, AJG, ALF, ALW, AML, AMM, APL, APS, APZ, ARJ, ARN, ASM, BDV
2.7T V6: AGB, AJK, ASJ, ARE, AZA, AZB, AZR, BES
2.8 V6: ACK, AGE, AHA, ALG, AMX, APR, AQD, ATQ, ATX, BBG
3.7 V8: AKC, AQG, BFL
4.2 V8: AKB, ANK, AQF, AQH, AQJ, ARS, ART, ARU, ASG, AUX, AVN, AVP, AUW, AWN, AXQ, AYS, BBD, BCS, BCY, BFM, BGH, BGK, BHX, BJG, BRV
OEM Tool: T4000;T40001
Made in China
4 Pcs Pry Bar Set With Hammer Cap, 50249
4 Pcs Pry Bar Set With Hammer Cap, 50249
Drop forged, heat treated and black oxide.
Size: 200mm (8"), 300mm (12"), 450mm (18"), 600mm (24").
Made in China
BMW/Opel/Vauxhall - Camshaft Gear Alignment Tool, 50876
BMW/Opel/Vauxhall - Camshaft Gear Alignment Tool, 50876
Designed to clamp onto the gear and hold the 2 gear halves in alignment so making the assembly and disassembly easier.
For Vauxhall 1.3 CDTi (B13) diesel camshafts and BMW B37 1.5 Diesel Balance shaft gears.
Applications:
BMW 1.5 Diesel 1 Series 2015<, 2 series 2014<, X1 2015<, BMW Mini One 2014<
Engine codes: B37C15A, B37D15A
Opel / Vauxhall Corsa E, 1.3 Diesel from 2015.
Engine codes: LKU/B13DTE, LKU/B13DTR, LKV/B13DTC
OEM#: 11 5 370 / EN-50509
Made in China
