Magma

SUBARU Forester 2500 c.c. Camshaft Pulley Holder, 50223

Features: To fixing the timing belt and easy to remove or install it. With three fixing points.
Application: SUBARU FORESTER 2500 c.c.

Made in China

Valve Spring Compressor Set for Motorcycle and Cars, 50101

Features: For disassembly and assembly of valves for cars, ATVs, vans, small marine engines and most motorcycle engines.
Comes complete with 5 pcs. metal collects of different sizes: 16 mm, 19 mm, 23 mm, 25 mm, 30 mm; 3 pcs. Extension screws; 1pcs. Compression bar / c-frame; Hand lever.

Made in China

Flow Meter Set For Common Rail Diesels With 24 pcs Adapter, 50183
Features:  For use on up to 6 Injectors. Measures the amount of fuel the injectors return to the deposit tank.

Measures the amount of fuel the injectors return to the deposit tank.
It can identify damaged or clogged injectors quickly and easily
Direct measurement of return flow of the injector, using external flow meter.
24 adaptors for Bosch-01, Siemens-02, Denso-03 and Delphi injectors.

Rechargeable Under Bonnet LED Lamp, 75043

Specification:
Adjustable length 1200-1800mm.
360° swivel ramp.
Rechargeable Lithium battery: 3.7V 4400mAh.
LED type: 10W SMD LED.
Max. lumens: 700 / 1500 lumens.
Operating time: 2 / 4 hours (High / Low)
Charging time: 2 hours.
Color temperature: 6000K.
USB Charging Cable.
Three options for lamp attachment:
-2 pcs. rotating hooks at both ends of the lamp body;
- suspension by magnets located at both ends of the breaking handles;
- Telescopic suspension of the metal bracket (1.17 m - 1.89 m)
The light tube can rotate angularly to direct the light.

Made in China

VW 2.8L – Camshaft Locking Tool, 50950

Designed to lock the camshaft of the 2.8L diesel engines used in the popular Volkswagen LT van.
To check and adjust the valve time.
Applicable: Volkswagen LT Van 1997 to 2006 2.8lt.
Engine codes: AGK 1997 to 2006, ATA 1999 to 2006, AUH 2001 to 2006, BCQ 2002 to 2006.
OEM number 3445

Made in China

BMW B37/B38 – Balance Shaft Removal Alignment Tool, 50896

Basic tools for required to remove, replace and time the balance shaft on the new BMW 1.5, 1.2 and 1.5 petrol engines.
Application: Mini Clubman 2015 - 2017, Mini Convertible 2016 - 2017, Mini Clubman 2015 - 2017, BMW 1 and 3 series 2015 - 2017, 2 series 2014 - 2017, X1 2015 - 2017, i8 2015 - 2017
Engine codes:
B37 (diesel engines), B38 (petrol engines)
OEM tools: 2,288,943, 2,288,942 and 2,358,646

Made in China

31 pcs Wheel bearing removal tool kit, 50889

Features:
Practical set of tools for disassembly and assembly of the hub and wheel bearings.
Makes installation easy and efficient as it eliminates the need to remove the knee and steering knuckle.
The tools are made of high quality heat-treated carbon steel for durability and long service life.
The set is provided in a convenient suitcase.
Specification:
Material: carbon steel
Contents:
Pressure plates with diameters of:
50mm (1.97 "), 55mm (2.17"), 59mm (2.32 "), 63.3mm (2.49"), 66.6mm (2.62 "), 70.3mm (2.77"), 71.5mm (2.81 "), 73.1mm (2.87) "), 73.4mm (2.88"), 74.8mm (2.94 "), 77.5mm (3.05"), 81.5mm (3.21 "), 83.4mm / (3.28")
Sleeves with following diameters:
Inner diameter 69.0mm (2.72 "), Outer diameter 76.0mm (2.99")
Inner diameter 77.5mm (3.05 "), Outer diameter 86.0mm (3.38")
Inner diameter 82.0mm (3.23 "), Outer diameter 91.0mm (3.58")
Inner diameter 92.5mm (3.64 "), Outer diameter 102mm (4.02")
3 extractor bolts M12 x 1.5, Overall length 110mm (4.33 ")
3 extractor bolts M14 x 1.5, Overall length 110mm (4.33 ")
Spindle diameter 22.2mm x 300mm (0.87 "x 11.81"), (including thrust bearing)
Pressure nut 32 x 60mm (1.26 "x 2.36")
Pressure sleeve diameter 38mm x 40mm (1.49 "x 1.57")
Thrust washer diameter 40mm x 3mm (1.57 "x 0.12")
Weight: 13,500 kg

Made in China

BMW N13, N18 – Engine timing tool set, 50624

Features: For fixing the camshaft to TDC position for N13 and N18 1.6 petrol engines of the 2012 BMW 114i, 116i, 118i, 316i and Mini Cooper.
Contents:
1-1) 11-7-440 – For fixing the camshaft at TDC position
1-2) 11-7-440 – For fixing the camshaft at TDC position
1-3) 11-7-440 - Bolt (3 pcs.) For fixing the camshaft at TDC position
2) 496-709 - Alignment pin for fixing the crankshaft in TDC position
3) 11-9-340 - Chain tensioner: For tensioning the timing chain.
4) 119-590 - Crankshaft localization tool in GMT position
Application:
BMW 114i (2012-2015); BMW 116i (2012-2015); BMW 118i (2011-2015); BMW 316i (2012-2015)
Mini Cooper S (R56/57) (2010-2015)
Mini Coupe Cooper S (R58) (2012-2015)
Mini Roadster (R59) (2012-2015)
Mini Countryman (R60) (2012-2016)
Mini Paceman (R61) (2013-2017)
Mini Clubman (R55) (2011-2014)
Peugeot 207, 308
Citroen C3, c3 DS3 Vti, Picasso DS3, C4 VTi, C4 Picasso
Engine codes:
BMW: N13 B16A; N18 B16/M0; N18 B16A; N18 B16A/M0; N18 B16A/MO; N18B16C; N18B16C/TO; N18B16M0
Peugeot: EP3, EP6
Citroen: 8FR, 5SF

Made in China

VAG 1.4 TFSI – Camshaft alignment tool set, 50427

For a new version of their 1.4 TFSi petrol engine. This new engine is equipped with CoD technology (Cylinder on Demand) which allows the engine to switch between 2 and 4 cylinder running modes to maximize efficiency.
Applicable: VAG 1.4 TFSi petrol engines with codes CPTA, CZEA (2012-2018)
Audi A1 / Sportback, A3 Convertible / Sedan, A3 / A3 Sportback, Q2, Q3; Seat Ateca, Ibiza, Leon / ST; Skoda Kodiaq, Superb; & Volkswagen Golf VII, Passat, Polo.
Contents:
Camshaft Positioning Tool - OEM number T10504
Short pin - OEM number T10504 / 1
Long stepped pin - OEM number T10504 / 2
Crankshaft locking pin - OEM number T10340.

Made in China

2 pcs 1/2"Dr. T50 Alternator tools, 50355B

Contents:

1/2"Dr. Torx socket bit T50x110mmL

33 teeth Ø19mm-17mm Hex Reaction corkscrew cap

Made in China

BMW N47/B47/B48 Balance shaft Alignment tool, 50342

Purpose:
Designed to lock the balancing shafts in the correct position when repairing BMW N47, B47 and B48 engines.
Application: B47 / N47 / B48 engines in series 1, 2, 3, 4 and 5, X1, X3, X4, X5, Mini Clubman, Mini Hatch.
OEM No. 11 8 750; 2 288 054

Made in China

Universal Pulley Puller Set, 50613

Features: For pulling and installing of belt pulleys at power steering pumps, generators, fan wheels and more.

Description:

Spacer: 140mm, 230mm

Straight puller arm: 60mm, 110mm

Curved puller arm: 60mm.

Made in China

Renault/Nissan 1.4; 1.6; 2.0; 2.5; 3.5 – Engine timing tool set , 50259

Features:
For locking the flywheel and front puller of Renault / Nissan 1.4 cars; 1.6; 2.0; 2.5; 3.5 with two cams, chain-driven petrol engines. It is also for locking the flywheel of M9R / 2.0 and M9T / 2.3 diesel engines.
Engine codes:
H4JT / 1.4
M5M / 1.6
MR4 / 2.0
2TR / 2.5
V4Y / 3.5
OEM equivalent:
МОТ 919-02
ТОТ 1431
МОТ 1716
МОТ 2019
МОТ 1789

Made in China

Seal Remover & Hose Pick Kit, 50611

Easily remove seals or O-rings pick soft hoses on vehicle.

Provided with different length and angle fits wide applications.

Angled blade is ideal for removing seals in limited space.

1 PCS 110° Angled remover with 360° Angled wing (285mmL)

1 PCS 100° Angled remover (210mmL)

1 PCS 93.5° Angled remover (193mmL)

1 PCS large seal remover with T-handle (165mmL)

1 PCS seal remover with T-handle (115mmL)

1 PCS hook (150mmL)

Made in China

VAG 02E 6-speed  DSG transmission Clutch Retaining Bar, 50908

Clutch Retaining Bar Used for asembly of multiple clutch on direct shift gearbox 02E - 6 speed
Application:
Volkswagen Beetle All 2.0T, Volkswagen Beetle GTI 2.0T Gen3, Volkswagen Beetle GTI TDI
Volkswagen Golf V All 2.0T, Volkswagen Golf VI All 2.0T, Volkswagen Golf VI All TDI
Volkswagen Jetta V All 2.0T, Volkswagen Jetta V All TDI, Volkswagen Jetta VI Sportwagen 2.0T
Volkswagen Jetta VI sedan 2.0T Gen3 GLI, Volkswagen Jetta VI sedan Facelift 2.0T Gen3 GLI
Volkswagen Jetta VI Sedan GLI, Volkswagen Jetta VI Sedan TDI
Volkswagen Jetta VI Sedan Facelift TDI, Volkswagen Jetta VI Sportwagen TDI
Volkswagen R32 MKV All 3.2
OEM No. T10303

Made in China