Hyundai/Kia, 2.5 diesel – High Pressure Fuel Pump Sprocket Remover, 50510

This tool is designed to hold the timing chain in place while removing the high pressure pump.
Applicable:  Hyundai/Kia
Models:
Hyundai iLoad (TQ; 2007-present)
Kia Sorento BL (2003-2009)
Motors:
Hyundai D 2.5 TCI-A, Hyundai D 2.5 TCI-A2
Kia D 2.5 VGT, Kia D 2.5 WGT
OEM: 09331-4A000, 093314A000

Made in China

10 pcs BMW Locking Wheel Nut Key Set, 50102

Master set for BMW vehicles
Tamper Proof type
Use with a 17mm socket
Sizes:
#11/5 point
#12/14 point
#13/16 point
#14/12 point
#15/11 point
#16/10 point
#17/7 point
#18/13 point
#19/8 point
#20/9 point

Made in China

VAG 1.8/2.0L Balance shaft puller, 50176

For the safe removal of the balance shafts, fitted VAG 4-cylinder chain drive 1.8 and 2.0 injection engines.
Internal thread M8 x 1.25 for sliding hammer.
OEM tool: T10394
Applicable: VW, Audi, Seat, Skoda
VW:
VW Passat (2007-2017); VW Scirocco (2008-2017); VW Sharan (2011-2017); VW Tiguan (2007-2016); VW Beetle (2013-2017); VW CC (2012-2015); VW Eos (2008-2015); VW Polo (2014-2017); VW Touran (2015-2017); VW Golf (2007-2017); VW Jetta (2011-2014)
Audi:
Audi A1 (2015-2017); Audi A3 (2007-2017); Audi A4 (2007-2017); Audi A5 (2007-2017); Audi A6 (2012-2017); Audi A7 (2014-2017); Audi A8 (2012-2014); Audi Q3 (2011-2017); Audi Q5 (2008-2017); Audi TT (2008-2017); Audi Q7 (2015-2017); Audi S1 (2014-2017); Audi S3 (2013-2017)
Seat:
Seat Altea (2006-2015); Seat Exeo (2010-2013); Seat Ibiza (2015-2017); Seat Leon (2007-2017); Seat Toledo (2007-2017)
Skoda:
Skoda Octavia (2007-2017); Skoda Superb (2008-2017); Skoda Yeti (2009-2015)
Engine code:
1.8: BZB, CDAA, BPU, BYT, CABA, CABB, CDHA, CDHB, CABD, DAJB, CJSA, CJSB, CJEB, CJEE, CJED, CYGA, DAJA, CDAB, CJSC, CGYA
2.0: CAWB, CCZA, CBFA, CCTA, CDNB, CDNC, CFKA, CHJA, CCZC, CPSA, CESA, CETA, CNCD, CYRB, CYRC, CNCE, CYNB, CYPA, CYPB, CULB, CULC, CNCB, CWZA, CJXF, CJXC, CJXB, CJXG, CHHC, CCZD, CJKA, CJKB

Made in China

14 mm 3/8”Dr. Spark plug socket, 50007F

Ideal for Installing and removing spark plugs.
Special spring clip design to hold the spark plug.
Size: 3/8" Drive x 14m
12-Point
Material: Cr-V

Made in China

Porsche Cayenne M97/01 Camshaft tools, 50869

Features: For correct fixing the camshaft of the Porsche Cayenne M97 / 01 when replacing the timing belt.
Applicable: Porsche 4.5L with M97/1 engine
OEM No.: 9678

Made in China

Fuel Injection Pump Sprocket Locking Tool - Ford Mondeo / Transit, 50940

Features: To lock the fuel injection pump sprocket during fuel pump removal and installation. Suitable for Ford Duratorq(Puma) 2.0, 2.2, 2.4 diesel engines.
Applications:
Ford Mondeo (10/2000-02/2007)
Ford Transit (01/2000-05/2006)
Ford Transit (04/2006-)
Engines:
2.0L Duratorq-DI Puma Diesel
2.0L Duratorq-TDCi Puma Diesel
2.0L Duratorq-TDDi Puma Diesel
2.2L Duratorq-TDCi Puma Diesel
2.4L Duratorq-DI Puma Diesel
2.4L Duratorq-TDCi Puma Diesel
2.4L Duratorq-TDDi Puma Diesel
OEM#: 303-1151

Made in China

VAG Coolant Pump Thermostat Wrench, 50907

Features: To easy removal and installation of thermostat without causing any unnecessary damage.
Applicable: Audi A3 2013> , VW Golf 2013 >, Skoda Octavia 2013 >, Seat Leon 2013>
Engines: 1.0 TFSi 3-cyl, 1.2 TSi, 1.4 TFSi, 1.4 FSi, 1.4 TDiCR 3-cyl.
OEM Tool: T10508

Made in China

VAG Camshaft Gear Locking Tool - Camshaft sprocket locking tool, 50890

Features: For locking the camshaft in adjusting position required for checking and adjusting the engine timing
Applicable:
Seat Mii 1.0 (3 cylinder) - (from 2012)
Skoda Citigo 1.0 (3 cylinder) - (from 2011)
Volkswagen Up 1.0 (3 cylinder) - - (from 2011)
Engine code: 1.0 CHYA (44 kW), 1.0 CHYB (55 kW), 1.0 CPGA (50 kW)
OEM Tool: T1047

Made in China

Land Rover / Jaguar 3.0 3.5 4.0 4.2 & 4.4 V8 – Engine timing tool set, 50833

Features: To hold camshaft during timing chain replacement.
Application:
Land Rover:
Gas 4.2 / 4.4 V8 Chain
Engine: AJ34
New Range Rover - LM (06-08)
Range Rover Sport - LS (05-08)
Discovery III - LA (05-08)
Jagular:
Gas 3.2 / 3.5 / 4.0 / 4.2 V8 Chain
Engines:
AJ26, AJ27, AJ28, AJ34
XJ (97-08)
S-Type (99-08)
XF (08-)
XK (97-08)
Note: This does not work for the Range Rover, BMW Engines.

Made in China

VAG 1.8 /2.0L (EA888) FSI/TFSI – Engine timing tool set, 50832

Features: For Camshaft Locking tools for Audi VW SKODA VAG 1.8 2.0 TFSI EA888 SF0233.
Applications: VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, VW CC, VW Scirocco, VW Golf Mk6 GTI, VW Scirocco, VW Passat B6, VW CC
Use for correct the camshaft and crankshaft timing position.
Four-cylinder EA888 petrols: 1.8L R4 16v TSI/TFSI, 2.0L R4 16v TSI/TFSI, 2006~2013 VAG series TSI, TFSI EA888 engine(1.8L, 2.0L).
OEM Tools:
T10352, T10352/1, T10352/2, T10368, T40196, T10354, T10060A, T40011, T40265, T40267, T40271
1.8 R4 16v TSI/TFSI (EA888)
Applications:
Audi TT Mk2 (8J), Audi 8P A3, Audi B7 A4, Audi A4 (B8), Audi A5
SEAT Leon Mk2 (1P), SEAT Altea XL
Škoda Yeti, Škoda Octavia Mk2 (1Z, Ming Rui), Škoda Superb Mk2 (3T)
VW Jetta Mk5/Sagitar, VW Passat B6, VW Passat CC

2.0 R4 16v TSI/TFSI (EA888)

Applications:
VW Golf Mk5 GTI (North American markets only)
VW Golf Mk6 GTI (North American markets only)
VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, VW CC, VW Scirocco, VW Golf Mk6 GTI, VW Scirocco, VW Passat B6, VW CC
Audi A3 (8P), Audi A3 Cabriolet, Audi TT, Audi A4 (B8), Audi Q5, Audi A5, Audi Q5, Audi TT Mk2 (8J),  Audi Q3
Škoda Superb Mk2 (3T), Škoda Octavia
SEAT Altea Freetrack, SEAT Leon FR, SEAT Exeo

Engine Code:
BYT, BZB, CABA, CABB, CABD, CADA, CAEA, CAEB, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CDAA, CDAB, CDHA, CDHB, CDNB, CDNC, CDND, CESA, CETA, CFKA, CGYA, CJEB, CJBA, CJSB.

Contents:
T10352 – Camshaft Control valve removal tool
T10352/1 – Camshaft Control valve removal tool
T10352/2 – Camshaft Control valve removal tool
T10368 – Crankshaft Thrust piece
T40196 – Drift for camshaft slide pieces

T10354 – Pressure piece
T10060A – Auxiliary drive belt tensioner locking pin
T40011 – Tensioner locking pin

T40265 – Oil pump tensioner locking pin
T40267 – Timing chain tensioner
T40271 – Camshaft clamp (Exhaust & Inlet)

Made in China

Subaru Impreza Camshaft Pulley Holder, 50813

Special wrench designed to hold the camshaft pulleys while removing and/or installing the central bolt.
The special design of this wrench avoids the possibility of damaging that pulley which has a composite plastic and steel construction.
The inner portion engages the intake camshaft gear on Non-AVCS engines.
Compare to Subaru Factory Tool #499207400 & #499207400-A
Size: 12pt/63mm
Lenght: 48cm/19-Inch
Application on Subaru Impreza EJ20 engine.
Subaru: Impreza WRX/STI (2002-2007); Impreza WRX (2008-2015); Forester XT (2004-2008); Legacy GT (2005-2010); Outback XT (2005-2010); Baja (2004-2006) Saab: 9-2X (2005-2006)

This tool will not fit the 2005 2.0 Turbos with Variable Camshaft Timing

Made in China

BMW N20 N26 1, 2, 3, 4 Series - Balance Shaft & Oil Pump Alignment Tool Kit, 50790

Function : For aligning the balancer shaft and holding the chain sprocket for removing and installing the oil pump or chain during chain repairs. Constructed with high standard Steel, which has an unparalleled lifespan with great durability.
Applications:
BMW 1 Series (2012-2016), 2 series (2014-2016), 3 series (2012-2016), 4 series (2014-2016), X1 (2011-2015), X3 (2011-2017), X4 (2014-2017), Z4 (2011-2017)
Engine codes: N20 and N26 1.6L/2.0L petrol engines
OEM No. 2 212 825, 2 318 117, 11 4 120

Made in China

Citroen C3 Peugeot 208, 308, 2008 SUV, Psa 1.0 1.2 Vti - Timing Tool set for Petrol, 50648A

Designed to hold the camshafts and crankshaft in their timed position during belt replacement.
Designed for the latest generation Citroën / Peugeot EB0 & EB2 1.0ltr and 1.2ltr 3 cylinder engines.
Content:
Camshaft Locking Tool
Crankshaft Timing Pin

OEM №: 0109-2A, 0109-2B

Models:
Citroën:
C1 II (2014-2018); C3 III (2012-2017); C3 IV (2016-2018), C4 Cactus (2014-2018); C-Elysee (2012-2018); DS3 (2012-2017)
Peugeot:
108 (2014-2017); 208 (2012-2018); 2008 (2013-2018), 301 (2012-2015); 308 (2013-2018); 3008 (2016-2018); 5008 (2014-2017); Partner III (2015-2018)
Toyota:  
Aygo (2014-2018)
Engine Codes:
1.0 VTi: EBO(ZMZ), EBOF(ZMZ), ZMZ(EBO)
1.2 VTi: 1PP(HM01), EB2 (HMZ), EB2DTS(HNY), EB2 (HMW), EB2M (HMY), EB2 (HMZ), EB2DTS(HNY), HMP (EB2FB), HMT(EB2D), HMU(EB2D), HMV (EB2M), HMY (EB2M), HMZ (EB2), HMZ (EB2D), HMZ (EB2F)
1.2 E-VTi: HMZ (EB2F), EB2F (HMZ)
1.2 PureTech THP: HNZ (EB2DT)
1.2 PureTech VTi:  EB2D(HMT), EB2F(HMZ), EB2DTS(HNY), EB2M(HMY)

Made in China

Fuel Synchronization test set, 50504

Designed for synchronization of automobile, motorcycle and other carburetor engines as well as injection engines.
Allows even adjustment of the amount of mixture in the individual cylinders and thus regular engine operation Pressure gauges can measure both vacuum and pressure. The vibration intensity of the indicator when the engine is running is regulated by the gas valves.
The kit includes the most used adapters that you can use when tuning several types of motorcycles.
Contents:
4 pcs. gauges - diameter 85 mm, fixed on the plate
4pcs. rubber hoses 8x5 with a length of 750 mm
4 extension tubes 3.9x52 mm
4 extension tubes 3.9x122 mm
8 pcs. Conical type connectors 8x40 mm
4 pcs. tubes 10x53 mm (M6X0.75)
4 pcs. tubes 10x60 mm (M6X1.0)

Made in China

Flow Meter Set For Common Rail Diesels With 24 pcs Adapter, 50183
Features:  For use on up to 6 Injectors. Measures the amount of fuel the injectors return to the deposit tank.

Measures the amount of fuel the injectors return to the deposit tank.
It can identify damaged or clogged injectors quickly and easily
Direct measurement of return flow of the injector, using external flow meter.
24 adaptors for Bosch-01, Siemens-02, Denso-03 and Delphi injectors.