Magma

Volvo T6 3.0 & 3.2 - Engine timing tool set, 50817          

Features: For Volvo T6 3.0 & 3.2 Engines             
Fitted to S80, XC60, XC70 & XC90 2007 on           
Designed for checking and adjusting the engine timing               
Fits on Volvo S80, XC90, XC60, XC70 3.0T, 3.2 with T6 engine as of 2007
Includes camshaft and crankshaft locking tool 
Contents:
Camshaft locking tool - OEM 999-7261 
Sprocket removal tool - OEM 999-7263/7264/7272         
Camshaft alignment tool - OEM 999-7257           
Also fits Land Rover 3.2 i6 2006 on          
Camshaft locking tool - OEM 303-1223 
Sprocket removal tool - OEM 303-1225/6
Camshaft alignment tool OEM 303-1219

Made in China

11 pcs Universal Clutch Alignment Tool Kit, 50808

Suitable for a wide range of vehicle including some light commercial vehicles. Screw action provides fast adjustment for required hub diameter. Eight interchangeable spigot adaptors aid close alignment.
Contents:
3 pcs Expanding mandrels: Ø15 - 19mm, Ø20 - 26mm, Ø23 - 36mm
8 pcs Centring bushes: 12, 14, 15, 16, 17, 18, 19 and 20mm (O/D)

Made in China

VAG 1.4 TSI Auxiliary Belt Tensioner Spanner, 50775

Specially designed spanner to allow for access to the auxiliary belt tensioner where access is limited
Used for loosening poly V-belt by turning auxiliary belt tensioner.
Jaw opening: 16mm.
Application: Audi, Seat, Škoda and Volkswagen with 1.4 TSI and TSi Blue Motion engines(1.4L 4-cylinder direct injection engine, turbocharger and supercharger).
Applicable to: Audi: A1 Sport back / 12-15 | A3 / 13-15 | A3 Sport back / 12-15.
Engine Codes : ACT | CPTA | CGGA | CHPA | CMBA | CPTA | CPVA | CRJA | CXSA
OEM No.: T10447

Made in China

Clutch Alignment Mandrels, 50681

Suitable for cars and light commercial vehicles.
Fast hub diameter adjustment achieved via screw action.
Adjustable from 15-19mm and 20-26mm diameter.

Made in China

Replacement Grinding Wheel, 51275

Made of silicon carbide abrasive.
No sparks and minimum dust development.
Outer Diameter: 150mm.
Inner Diameter: 90mm.
Maximum speed: 4000 rpm.
Suitable for Aluminium Wheel Hub Grinder 150mm MG51274.

Made in China

Air Conditioning Compressor Clutch Puller Set, 50677

Features:
Professional A/C Compressor Clutch Remover Kit.
Replaces clutches found on FS6, C171, 6P & 148 compressors GM R4 & A6, HR-6, DA-6 & V5 A/C compressors.
Sanden compressors SD505, 507, 510, 575, 708 & 709.
2 & 3 hole puller plate fits most clutches, mechanical force does the pulling.

Made in China

VAG - Timing Belt Tensioner Wrench, 50669

For adjusting the timing belt at the tensioner roller.
Suitable for Audi, Volkswagen, Seat, Škoda vehicles.
Distance of pins: 18 mm
Pin diameter: 3mm
OEM#: 3387

Made in China

60 - 80mm Reversible Oil Filter Wrench, 50666

Features:
2 jaws with teeth provide a strong grip and are not easy to slide. The wrench can hold half of the filter for greater grip and reduce the risk of sliding if the filter is stubborn or damaged.
Reduce time-consuming disassembly and stubborn filter disassembly. Spring-loaded for easy installation and disassembly.
Is used with half bending rod or ratchet wrench.
Rigid high carbon steel with a spring that has strong elasticity and is durable..
Specification:
Special design allows the oil filter to be removed and installed quickly and easily.
Steel jaws securely grip oil filter without slipping.
Fits sizes 60mm - 80mm.
Use with 1/2" drive.
Reversible.

Made in China

8 Pcs Damaged Hex Screw Extractor Set, 51224

Used for removing damaged, rounded or corroded Hex socket head screws and bolts.
Material:
Sockets: Chrome vanadium steel
Bits: S2 steel.
Set containis:
4x 1/4" Drive Bit Socket: 3, 4, 5, 6mm, Length 37mm
4x 3/8" Drive Bit Socket: 7, 8, 9, 10mm, Length 48mm

Made in China

BMW N-series Crankshaft Locking Tool, 50575

Used to lock crankshaft when releasing or tightening the central bolt.
Suitable for BMW N12, N14, N40, N42, N45, N46, N52, N52, N53, N54 engines.
OEM#: 11 9 280

Made in China

150mm Aluminium Wheel Hub Grinder 51274

Used to remove corrosion and dirt from wheel hubs and brake discs.
For cleaning the wheel centering device as well as the attachment area between the wheel and hub.
Corrosion between the rim and the wheel hub is removed and torque values can no longer be distorted.
Aluminium grinding body.
Long-live grinding wheel.
Suitable for use with impact wrenches or cordless impact wrenches.
1/2" Square Drive.
Outer Diameter: 150mm.
Inner Diameter: 90mm.
Maximum speed: 4000 rpm.

Made in China

BMW N20/N26 Flywheel Locking Tool, 50570

Description:
Great for Replacing The Timing Chain.
Works on BMW N20 and N26 engines.
Used for securing the crankshaft with the transmission installed(connected to engine)
Comparable to BMW Factory Tool No. 83302222742
(Note: Automatic transmissions only.)
Features:
While replacing the timing chain, this tool can hold the flywheel;
It helps to release and tighten down the central bolts on the vibration damper.
Application:
BMW 125i N20 2012-2017;
BMW 220i N20 2014-2018
BMW 225i N20 2014-2017
BMW 228i N20 2014-2016
BMW 320i N20 2012-2015
BMW 320i GT N20 2013-2016
BMW 328i N20 2011-2016
BMW 328i GT N20 2013-2016
BMW 520i N20 2011-2016
BMW 520Li N20 2013-2016
BMW 525Li N20 2013-2016
BMW 528i N20 2011-2017
BMW X1 xDrive/sDrive20i N20 2011-2015
BMW X1 xDrive/sDrive28i N20 2011-2015
BMW X3 N20 2013-2018
BMW X3 xDrive20i N20 2011-2018
BMW X3 xDrive28i N20 2012-2018
BMW X4 xDrive20i N20 2014-2017
BMW Z4 N20 2013-2015
BMW Z4 sDrive20i N20 2011-2016
BMW Z4 sDrive28i N20 2011-2016
BMW 328i / 328iX N26 2012-2016
BMW 228i / 228iX N26 2012-2016

Made in China

VAG 1.8;2.0 TFSI Camshaft Central Valve Removal Socket Kit, 50553

Description: Used for removal and installation of 4/3-way central valve for camshaft adjustment on 1.8 & 2.0 generation III TFSI engines..5 sizes with unique 2-pin positions. All with 3/8" square drive. Same as tool #T10352 special tools for VW AUDI Q5 2.0T MAGOTAN positive CC timing T10352/1 B8 A6L A8"

Applications:

Audi A3 with 4-cylinder gas direct injection, 1.8 liter, 2.0 liter ,4v, TFSI engine with chain. Passat 2006>, Passat CC 2009>, Audi A3 2004> 4-cyl. injection engine (1.8 liter and 2.0 liter engine, chain drive). Audi A4 2008 >, Audi A5 Cabriolet 2009 >, Audi A5 Coupe 2008 >, Audi Q5 2008 >, Audi A3 2012. 4-cyl. 1.8l, 2.0l 4V TFSI direct injection engine- generation II

OEM No. T10352, T10352/1, T10352/2, T10352/3, T10352/4

Made in China

Diesel/Petrol VAG 1.9; 2.4; 2.5, 2.7, 2.8 - Belt drive camshaft sprocket remover, 50329

Specially designed to remove amshaft sprockets with 5 and 6 spikes from Audi, Vw, Skoda vehicles.
Features ball and thrust screw to eduse damade to camshaft bolt.

Applications
Diesel engines:    
1.9D SDi/Tdi: Audi; A3 (96-03), Seat; Ibiza/Cordoba (99-02), Leon (00-05), Toledo (99-05), Skoda; Octavia (97-06), VW; Beetle (98-04), Bora (97-05), Caddy (95-04), Golf (97-05), Polo (99-02)
2.5D Tdi V6: Audi; A4 (97-09), A6 (97-05), A6 Allroad (00-05), A8 (97-02), Skoda; Superb (02-08), VW; Passat (98-05)
2.5D TDiCR: VW; Crafter (06-12)
Engine Codes - Diesel:    
1.9D SDi/Tdi: AGP, AGR, AHF, ALH, AQM, ASV
2.5D TDiV6: AFB, AKE, AKN, AYM, BAU, BCZ, BDG, BDH, BFC
2.5D TDiCR: BJJ, BJK, BJL, BJM, CEBA, CEBB, CECA, CECB
Petrol engines:    
2.4, 2.7T, 2.8 V6: Audi; A4 (94-09), RS4 (00-02), S4 (97-01), A6 (95-05), A6 Allroad (00-05), A8 (96-10), Skoda; Superb (02-08), VW; Passat (96-05)
3.7, 4.2 V8: Audi; A6 (99-05), S6 (00-04), A8 (99-09), S8 (99-03), RS6 (03-05), VW; Touareg (03-07), Phaeton (03-15)
Engine Codes - Petrol:    
2.4 V6: AGA, AJG, ALF, ALW, AML, AMM, APL, APS, APZ, ARJ, ARN, ASM, BDV
2.7T V6: AGB, AJK, ASJ, ARE, AZA, AZB, AZR, BES
2.8 V6: ACK, AGE, AHA, ALG, AMX, APR, AQD, ATQ, ATX, BBG
3.7 V8: AKC, AQG, BFL
4.2 V8:    AKB, ANK, AQF, AQH, AQJ, ARS, ART, ARU, ASG, AUX, AVN, AVP, AUW, AWN, AXQ, AYS, BBD, BCS, BCY, BFM, BGH, BGK, BHX, BJG, BRV

OEM Tool: T4000;T40001

Made in China

VW 1.8; 2.0 TFSI Camshaft Locking Tool, 50522

Description:
The camshaft sprockets locking tool is used for locking the intake and exhaust camshafts when loosening the central screw.
Application: VW 1.8 TFSI / 2.0 TFSI
Engine code : CABD, CAEA, CDNB, CDNA, CAWA, CBFA, CCTA, CCZA, CAEB, CDNC, CDHA, CABA, BYT, BZB, CDAA, CABB, CDHB

Made in China