Magma

Diesel Engine Locking Kit - Renault/Nissan dCi & Vauxhall/Opel 1.5, 1.9, 2.2, 2.5 Di/DTi/CDT, 50306

Essential tools for timing belt replacement on a wide range of Renault, Nissan & Vauxhall/Opel diesel engines. 
Essential tools for timing belt replacement on a wide range of Renault, Nissan & Vauxhall/Opel diesel engines. 
Applications:
Renault:
Avantime (05-07), Clio II (01-06), Clio III (05-08), Espace (00-08), Kangoo (00-08), Laguna (99-01), Laguna II (04-07), Master (00-06), Megane (99-03), Megane II (02-08), Modus (04-08), Scenic (99-03), Scenic II (03-08), Trafic (01-08), Twingo (07-08)
Nissan:
 Almera N16 (02-06), Interstar (02-06), Kubistar (03-08), Micra K12 (03-08), Note (06-08), Primastar (02-07), Primera P12 (03-07), Qashqai (08-09)
Vauxhall/Opel:
Movano (00-08), Vivaro (01-08)
Engine Size & Codes: 1.5 - K9K, 1.9 - F9Q, 2.2 - G9T, 2.5 - G9U ...

5 pcs Inner bearing puller, 50140

The kit consists of a slide hammer (2 Lb-980 g) and a set of extractors of various sizes needed to pulling internal bearings.
Capacity: 3/8 "(10mm) - 1-1 / 4" (32mm)
Contents:
Slide hammer - 980 g
Bearing extractor: 3/8 "to 1/2" (10 mm-14 mm)
Bearing extractor: 9/16 "to 11/16" (15mm-19mm)
Bearing extractor: 5/8 "to 1" (18mm-25mm)
Bearing extractor: 1 "to 1-1 / 4" (25mm-32mm)
Come with a carry case.

Made in China

3-Jaw Oil filter wrench, 50034

For removing and installing oil filters.
Working range: 75-140mm
Using witt 3/8" DR. and  1/2" Dr. Ratchet handle or hex spanner 21 mm

7 pcs air conditioning A/C fuel line disconnect tool set, 50129

Features: Easily disconnects air conditioning lines and quick connect fuel lines 
Specification:
- Simple assembly and disassembly of quick connectors for automotive air conditioning duct and fuel pipelines, easily disconnected;
- Practical, easy, and affordable;
Weight”116 g 
Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"

Made in China

VW, AUDI Crancshaft locking pin M18x1.5, 50767

Features:
To lock the crankshaft at the TDC position

Applicable:
V6, V8 engines.
OEM No.: 3242, T30052.

Petrol twin cam locking/setting tool set FIAT 1.6 16V, 50692A
Contents:
TDC Position tool – OEM No. 1 895 443 000
Tensioner adjuster – OEM No. 1 860 876 000
Camshaft Setting Plate ( Inlet and Exhaust ) - OEM No. 1 860 874 000

Applicable:
Fiat 1.6 16v twin cam petrol engine (95-) in:

Fiat: Brava, Bravo, Marea, Marea Weekend, Multipla, Palio, Stilo

Engine code:

178B3.000, 182A4.00, 182A6.000 & 182B6.000

Made in China

30 pcs Alternator pulley tool kit, 50818

For removing the alternator pulleys.
Includes special sockets and bit sockets

1pc M10 Spline Bit Socket : length 120mm
1pc M10 Spline Bit Socket : length 140mm
1pc M10 Spline Bit, 14mm Hex. Drive :  length 57mm
1pc 3/8" Dr. M10 Spline Bit Socket with 31Teeth Nut :  length 90mm
1pc 8mm Hexagon Bit Socket : length 120mm
1pc T50 TX-Star Bit Socket : length 120mm
2pc 75mm(length) Spline Bit : M8-M10
2pc 75mm(length) TX-Star Bit : T40-T50
2pc 75mm(length) Hexagon Bit : 8-10mm
2pc 10mm Hex. Drive x H10 Bit : 50mm(length), 70mm(length)
1pc 33 Teeth Alternator Nut -15mm Hex
1pc 33 Teeth Alternator Nut -15mm Hex
1pc 33 Teeth Alternator Nut -17mm Hex
1pc 33 Teeth Alternator Nut -22mm Hex
1pc 17mm Hexagon Alternator Nut - inner size : 14mm
1pc 1/4" Dr. 10mm Hex. Socket
1pc 17mm Hexagon Alternator Nut
1pc 22mm Hexagon Alternator Nut
1pc 28mm x 22mm Hexagon Alternator Nut
1pc 28mm x 21mm Hexagon Alternator Nut
1pc 28mm x 19mm Hexagon Alternator Nut
1pc 17mm x 19mm Hexagon Alternator Nut
1pc 17mm x 21mm Hexagon Alternator Nut
1pc 4 Poins Alternator Nut with 17mm Hex
1pc 3 Poins Alternator Nut with 38mm Hex
1pc 1/2" Dr. x 10mm Hex. Bit Holder...

VW Diesel Crankshaft Sealing flange tool, 50746

OEM No. T10134

Application: VAG 1.4; 1.6 16V (VW, Audi, Seat, Skoda) as well as Fiat - BAG 1.6 (petrol injection engines), 1.9 / 2.0 SDi, 2.0 TDi and 2.0 Common Rail diesel engines after 2006.

Made in China

Twin camshaft locking strap tool AUDI 2.6 & 2.8 V6, 50856

Features:
This camshaft locking strap will hold the twin cams in place V6 2 valve engines.

Applicable:
For Audi 80 2.6/2.8, A4 2.6/2.8, 100 2.6/2.8, A8 2.8, Cabrio 2.6, Coupe 2.6/2.8 1991-2000.
Engine code AAH, ABC.
For V6 engines with 2 valve.
OEM No.3243

Made in; China

Camshaft alignment timing tool – VW, AUDI V8 50852

Description: Hold and fixed  both camshafts to the TDC (top dead center) position when changing the timing  belt.
Suitable for 3.7L and 4.2L V8 engines with 5V on the Audi A6, A8, S8, as well as the VW Touareg and Phaeton.
The included locking pin is used to lock the crankshaft in the TDC position while changing the belt or removing the crankshaft bolt.
Specifications
Material: Carbon steel
Total length: 69 cm
Pin length: 7.5 cm
A locking pin is included
Set contains:
1 Pc Twin Camshaft Holding Bracket - VAG, OEM № T40005. 
1 Pc Crankshaft Locking Pin M18 x 1.5 - VAG, OEM № 3242.
Suitable for For VW and Audi 4.2L V8 engines with 5 valve per cylinder design.
Does not fit newer FSI V8 engines.
Audi:
Audi A6/Quattro (1999-2005), S6 (2000-2004), A8 (1999-2006), S8 (1999-2003), RS4 (2003-2005), RS6 (2003-2004).
VW:
VW - Touran (2003-2006), Phaeton (2003-2004)
Engine VAG 4.2 V8
Code:
3.7 - AKC, AQG, BFL;
4.2 - ANK, AQH, AQJ, ARS, ARU, ASG, AWN, AVN, AVP, AUW, AXQ, BCY, BFM, BGH, BHX

Made in: China

Camshaft alignment timing tool VW, AUDI V6, 50851

This tool set is used to hold / secure both camshafts and crankshaft at TDC position when replacing timing belt.

Crankshaft locking pin is used to lock the crankshaft at the position when timing the engine or servicing the timing belt or flywheel / drive plate.

Applicable to 2.8L and 2.7L Bi-Turbo V6 5-valve(30 valves) engines installed in VW & Audi platforms from 1997-2005.

Set contains:

1 Pc Twin Camshaft Holding Bracket - VAG, OEM# 3391.

1 Pc Crankshaft Locking Pin M18 x 1.5 - VAG, OEM# 3242.

Applicable:

Audi A4 2.4 and 2.8 (1997-2002)

Audi A6 2.4 and 2.8 (1997-2002)

Audi A8 2.8 (1997-2002)

Audi S4 2.7 Biturbo (1997-2001)

VW Passat 2.4 (1996-2002), Passat 2.8 (1996-2001)

Engine codes:

2.4 V6 30V: AGA, AJG, ALF, ALW, AML, AMM, APC, APS, APZ, ARJ, ARN, ASM, BDV

2.7 V6 30V: GTC, AJK, ARE, ASJ, AZA, AZB, AZR, BES

2.8 V6 30V: ACK, AEJ, AGE, AHA, ALG, AMX, AVR, AQD, ATQ, ATX, BBG

Made in: China

6 pcs Diesel glow plug service kit, 50823

Features: To remove and repair glow plugs for most diesel models.
Content:
- Three 6-pt. socket inserts with a 180 ° flexible head for 8 mm, 9 mm and 10 mm glow plugs
- Glow plugs removal rool
- Two M10 and M12 threading reaming tools to remove the carbon deposits in the glow plug chamber.

Made in China

Engine timing tool set - Renault 1.6/1.9 dCi, 50777

Set contents:
- Crankshaft locking pin  - OEM No. MOT 1489
- Camshaft / crankshaft timing pin – OEM No. 0194B, 999-7122, 21-263, MOT 1430, 0187B, 0189B
- TDC Timing Pin -  KM603 – OEM No. MOT 1054 MOT 861 MOT 863 

Applicable: Renault Laguna, Clio и  Kangoo с 1.5 and 1.9 dCi двигатели.
And also for:
Nissan Kubistar, Micra, Note, Qashqai, Dacia Duster, Suzuki  Jimmy  with 1.5 dCi engines.

Renault Clio 1.5 DCi (2001-2008)
Renault Clio 1.9 DTi (1999-2003)
Renault Espace 1.9 TDi (1997-2002)
Renault Kangoo 1.5 DCi (2004-2008)
Renault Kangoo 1.9 DTi (1999-2003)
Renault Laguna 1.9 DTi (1997-2003)
Renault Megane II 1.5 DCi (2002-2005)
Renault Megane 1.9 D/TD/TDi (1995-2003)
Renault Scenic II 1.5 DCi (2002-2005)
Renault Scenic 1.9 TD (1995-1999)
Engine code: K9K; F9Q; F8Q

Made in: China

Engine timing tool set – Ford, Mazda & Volvo, 50658

Designed for the belt or chain driven petrol or diesel Ford, Mazda and Volvo engines.
This Ford and Mazda petrol engine timing tool is a four-piece camshaft setting bar that is suitable for all the applications including the latest HWDA, HWDB, HXDA, Zetec and Duratec engines.
This automotive tool covers a huge range which include 1.25 L, 1.4 L, 1.6 L and 1.6 L 16V Ti-VCT engines as well s the 1.8 L, 2.0 L and 2.3 L 16V engines.
Set is suitable for these engines in Mazda and Volvo vehicles.

OEM Tools: Ford; 303-1054, 303-507 (21-210), 303-620 (21-163), 303-574, 303-748, 303-376 (21-162B), 303-376B, Mazda; 49 JE01 061, 303-574, 49 JE02 061, 303-465, 49 JE01 054, Volvo; 999 7152, 999 7151

Applications:

Ford: C-MAX (07-10), Cougar (98-01), Fiesta (95-15), Focus (98-11), Focus C-MAX (03-07), Fusion (02-12), Galaxy (06-12), Mondeo (93-12), Puma (97-02), S-MAX (06-12), Tourneo Connect (02-06), Transit (06-12), Transit Connect (02-06)

Mazda: 121 ZQ (95-00), 2 DY (02-07), 3 BK (03-09), 3 BL (09-15), 5 CR (05-10), 5 CW (10-12), 6 GG/GY (02-07), 6 GH (07-15), MPV LW (02-05), MX-5 NC (05-15), Tribute EP (04-06)

Volvo: C30 (06-13), S40 (06-12), S80 (07-11), V50 (04-12)

Ensure precise engine timing with this comprehensive Engine Timing Tool Set, designed for Ford, Mazda, and Volvo 1.6L and 2.0L T4/T5 engines (50736). This kit provides the essential tools needed to properly synchronize your engine, offering both reliability and accuracy.

Key Features:

• Broad Compatibility: Suitable for a wide range of Ford, Volvo, and Mazda models.
• High-Quality Materials: Constructed from high-quality carbon steel for superior strength and durability.
• Complete Set: Includes all necessary tools for camshaft timing and locking.

Applications:

Ford: Compatible with Ford Fiesta (08-15), B-Max (12-15), C-Max (03-15), Focus (04-15), Grand C-Max (10-15), Tourneo Connect (13-15), Grand Tourneo Connect (13-15), S-Max (10-15), Galaxy (10-15), Kuga (13-15), and Transit Connect (13-15).

Volvo: Suitable for Volvo S80 (09-14), V40 (09-14), V40 Cross Country (10-14), XC60 (09-14), V60 (10-14), V70 (09-14), and S60 (11-11).

Mazda: Compatible with Mazda 5 (CW) (10-15) and Mazda 6 (GH) (10-13).

Made in China.