Magma

Bearing separator 30-50 mm, 50132-1

-  Capacity: 30mm x 50mm  (1-1/4" to 2-1/4")
-  Bolt 9.5 x 125 mm, thread 3/8" x 24UNF
-  Body thread 3/8" x 16UNC
-  HRC 42-45°
-  Forged
-  Chrome plated

Door upholstery tack remover, 50939

Designed to remove the car door panel.
Comfortable extended handle.
Made of heat treated carbon steel.
Screwdriver length: 200 mm

Made in China

1/2"Dr. Oxygen sensor wrench 22 мм (7/8"HEX), 50359

Easy removing and installation of oxigen sensors. Suitable for work in hard-to-reach areas. Offset design for limited areas.

Works with a 1/2"Dr. ratchet handle.

Size: 22 mm, 6-pt

Application: FORD, TOYOTA, NISSAN, BENZ, BMW and most of the European cars.

Material: CR-MO

Made in China

VW/Audi 2.5 Tdi V6, Audi A8 3.3 Tdi V8 - Engine timing tools, 50316
Application:
Car models:
VW: Passat (98-05)
Audi:A4 (97-09), A6 (97-05), A8 (97-02), Alloard
Skoda; Superb (02-08)
Engines:
2.5 V6 TDI, 3.3 V8 TDI
Engine code:
AFB, AKE, AKN, AYM, BAU, BCZ, BDG, BDH, BFC
Contents:
2xCamshaft locking plates
1xCrankshaft Locking TDC screw

Applicable:
* VW/AUDI 2.5 TDI V6 & AUDI A8 3.3 TDI V8 engines
* AUDI V6 petrol & V6/V8 diesel engines

Made in China

Petrol Engine Timing Kit-OPEL& VAUXHALL 1.0,1.2,1.4, 50304

This set of kit includes all the locking tools to time the chain on 1.0, 1.2, 1.4 Ecotec Vauxhall / Opel twin cam(chain) engines.
The timing disc position gauge for positioning the timing sensor disc fitted to the inlet camshaft is also included.
Applicable:
Models: Corsa, Agola, Astra,Meriva (97-04)
Engines:1.0 12v., 1.0 16v, 1.4 16v(Chain).
Codes: X10xe, Zi0xe, Z10xep,X12xe, Z12xep, Z14xep.
This set of kit includes all the locking tools to time the chain on 1.0, 1.2, 1.4 Ecotec Vauxhall / Opel twin cam(chain) engines;
The timing disc position gauge for positioning the timing sensor disc fitted to the inlet camshaft is also included.

Petrol Engine Timing Kit-RENAULT 1.4,1.6,1.8,2.0 16V-Belt Drive
Suitable for timing belt replacement on petrol 1.4, 1.6, 1.8 and 2.0 engines fitted to Renault vehicles. Some 1.8 and 2.0 engines may require associated tool to loosen the camshaft sprocket bolts.
Suitable for timing belt replacement on petrol 1.4, 1.6, 1.8 and 2.0 engines fitted to Renault vehicles.
Some 1.8 and 2.0 engines may require associated tool to loosen the camshaft sprocket bolts.
Renault Clio II (99-06) 
Renault Clio III/Sport (05-12)
Renault Espace/Grand Espace (98-02)
Renault Espace/Grand Espace IV (02-10)
Renault Kangoo/Trekka (01-09)
Renault Laguna (98-01)
Renault Laguna II (01-07)
Renault Laguna III (07-10)
Renault Megane (99-03)
Renault Megane II (02-10)
Renault Megane III/Sport (08-12)
Renault Megane/Scenic (99-00)
Renault Scenic/RX4 (99-03)
Renault Scenic/Grand Scenic II (03-09)
Renault Trafic II (01-11)
Nissan Kubistar X76 (03-09)
Nissan Primaster X83 (02-11)
Vauxhall/Opel Vivaro (01-11) 
Applications:
Renault : Avantime (00-03), Clio II (99-06), Clio III/Sport (06-09), Espace/Grand Espace (98-02), Espace/Grand Espace IV (02-10), Kangoo/Trekka (01-09), Laguna (98-01), Laguna II (01-07), Laguna III (07-13), Megane (99-03), Megane II (02-10), Megane III/Sport (08-13), Megane/Scenic (99-00), Scenic/RX4 (99-03), Scenic/Grand Scenic II (03-09), Trafic II (01-11), Twingo II (08-14), Vel Satis (00-10), Wind (10-14).
Nissan : Kubistar X76 (03-09), Primastar (02-11).
Vauxhall/Opel : Vivaro (01-11).

Engine Code:
K4J 1.4 16v - Renault 730, 732, 740
K4M 1.6 16v - Renault 708, 730, 732, 750, 752, 753, 760, 761, 764, 812, 813, 848
K4M 1.6 16v - Nissan 752, 753
F4P 1.8 16v - Renault 720, 722, 760, 770, 771, 772,773, 774, 775
F4R(t) 2.0 16v - Renault 700, 701, 712, 713, 714, 715, 720, 722, 730, 732, 740, 741, 744, 746, 764, 765, 770, 771, 774, 776, 780, 784, 786, 787, 790, 791, 792, 794, 795, 796, 797, 800, 810, 811, 820, 830, 870, 874
F4R(t) 2.0 16v - Nissan 720, 722, 820
F4R(t) 2.0 16v - Vauxhall/Opel 720, 722, 820

Made in China.

Engine timing tool set for RENAULT SCENIC LAGUNA CLIO 1.4/1.6 16V, 50094

Features: For the orrect synchronization of the Renault K4J, K4M and F4P, F4R when changing the belt.
Application: Clio, Laguna, Megane 1.4 / 1.6 16v
  The set includes:
- 8 mm TDC timing pin- OEM No .: MOT 1054, MOT 861, MOT 863
- Crankshaft Locking Pin - OEM No .: MOT 1489
- Camshaft setting tool - OEM No .: MOT 1496
- Camshaft pulley alignment tool - OEM No .: MOT 1490
Applications:
Clio 1.4, 1.6 16V (98-06).
Megane 1.4, 1.6 16V (98-06).
Clio Sport 2.0 16V (98-06).
Megane 1.8, 2.0 16V (98-04).
Espace 2.0 16V (98-04).
Megane II 1.4 16V (02-09).
Grand Scenic II 1.4/1.6 16V (02-09).
Megane II 1.6 16V (02-05).
Laguna 1.6 16V (98-06).
Megane II 2.0 16V (02-09).
Laguna 1.8 16V (01-05).
Scenic 1.4, 1.6 16V (98-06).
Laguna 1.8, 2.0 16V (98-04).
Scenic 1.8, 2.0 16V (98-04).
Laguna II 2.0 16V T (02-09).
Scenic II 1.4, 1.6, 2.0 16V (02-09).

Fiat Alfa Romeo Lancia 1.2; 1.4 16V - Engine Timing Tool Set, 50523

Features: For adjusting the engine timing during timing belt replacement, cylinder head repair, replacement of the cylinder head gasket, etc.

Suitable for Alfa Romeo, Fiat and Lancia 1.2 16V / 1.4 16v / 1.4 T-Jet

Engine codes:

169A3000, 179B9000, 182B2000, 188A5000, 192B2000, 198A1000, 198A4000, 199A6000, 199A8000, 843A1000

Contents:

OEM 2.000.004.500 - Crankshaft locking tool (with screws M6x30 and 3 pcs. M8x16)

OEM 1.860.985.000 - Camshaft adjusting tool (1 pair)

OEM 1.860.992.000 - Adjusting tool for piston height

OEM 1.860.987.000 - Adjusting tool for timing belt tensioner

OEM 2.000.015.800 - Locking tool for camshaft sprockets (with screw M8x30)

Made in China

Engine timing tool kit for Renault, 50089

This new camshaft pulley setting tool holds two pulleys in place while changing the cam belt and correct engine timing to be performed when changing the timing belt.
Installing and removal of camshaft / variable camshaft timing unit.
Checking and adjustment of timing.
Petrol engine:
Twin camshaft engine: 1.2, 1.4, 1.6, 1.8, 2.0 16V, 2.5 20V.
Diesel engine: 1.9D/TD/dTi, 2.2D/TD, 2.5D, 2.8dTi, 1.5dCi, 1.9dCi, 2.2dCi, 2.5dCi
Applicable:
Renault 16V & K4J, K4M & F4P, F4R / 1.4 16V K4J / 1.6 16V K4M / 1.8 16V F4P & F4R(Langunall).
Suitable for:
1.2 (Engine code D7F) e.g. Clio and Twingo
1.2 / 1.4 / 1.6 (Engine code E5-E7F, E7J, K7M) e.g. Clio, Megane, Scenic, Kangoo
1.4 / 1.6 16V (Engine code K4J, K4M ab 1998) e.g. Clio, Clio Sport, Megane, Scenic, Laguna, Espace
1.7 / 1.8 / 2.0 (Engine code F1N - F3N, F3P, F2R - F3R) e.g. Clio, Megane, Scenic
1.8 / 2.0 16V (Engine code F4P, F4R ab 1998) e.g. Clio, Clio Sport, Megane, Scenic, Laguna, Espace
1.8 / 2.0 16V (Engine code F7P, F7R) e.g. Clio Williams, Megane, Spider, R19
2.0 / 2.2 (Engine code J5R - J7R, J5T) e.g. Safrane, Espace, Master, Traffic
2.0 16V / 2.5 20V (Engine code N7Q, N7U) e.g. Laguna and Safrane
And identical Volvo engines (Engine code B16, B18, B20) e.g. Volvo 440, 460, 480

Suitable for the following diesel engines:
1.9/2.5/2.8 Engine code F8M, F8Q, G8T, J8S, F9Q, S8U, S9U, S9W e.g. Clio, Laguna, Megane, Kangoo, Espace, Master, Traffic
Identical diesel engines e.g. Opel Arena, Movano and Volvo S40, V40 etc.

Made in China

5 pcs 1/2"Dr. Twist socket set

Socket size: 17 mm, 19 mm, 21 mm, 22 mm and 12 mm and drift punch.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

Water pump sprocket holder, 50864

Application:
For GM Ecotec; Holds the Timing Chain and Gear in Place While Removing or Installing Water Pump on Ecotec Engines.
Securely holds water pump sprocket preventing loss of timing or damage to the engine.
Special half-moon design allows easier access to water pump gear bolts.
Uses access cover bolts to hold the tool in place.

Made in China

17 pcs proffesional slide hammer/puller set, 50139A
Features:
Designed to use with other 5/8" - 18 thread slide hammer attachments.
Internal and External jaws provide a variety of combinations to pull bearings, gears and seals
Pulls flange-type rear axle and most front wheel drive hubs.
Set includes grip wrench adapter and dent puller
Two and three way cross blocks and cone provide perfect jaw configuration for many jobs
Drop forged steel puller and fully hardened shaft and accessories.
Converts in to 2 or 3 jaw internal / external puller.

1/2" Dr. Ratchet handle, G0001

72 teeth

Made of CR-V

Made in China

3 pcs Flexible Hose Clamps, 50201

Features:
-For sealing the heater hoses from 1/2 "to 3/4" in diameter.
-Used in the brake lines and fuel system piping.
-Radiator pipe clamp.
-Special arc design will not damage the internal hose material.
-Lightweight and non-conductive.
-Bright colors easy to find.

Auxiliary stretch belt removal installation tool, 50370

Designed for the recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems such as the alternator or power steering.
■ Prevents damage to the pulley and prolongs the life of the belt.
■ Two tools included, one for installation and one for removal.
■ Fits most crankshaft pulleys.
■ Supplied in Blow-Molded Case.