Magma

Universal tie rod wrench, 50443

The mster tie rod tools easily replace inner tie rod ends from 33-42 mm diameter without removing the rack and pinion.
Work with 1/2" square drive tools.

Diesel engine setting/locking kit - Jaguar & Land Rover 2.7, 50307

This tool kit is a complete kit that allows the valve timing to be set/maintained during cam belt replacement

• Timing pins for Land Rover Discovery 2.7 TDV6, Range Rover Sport 2.7 TDV6 and Jaguar S Type TDVi with V6 engines with automatic and manual transmissions
• Engine Code 276DT 2004-2007 and 306DT 2009-2014
• Flywheel Locking Tools - OEM 303-1117 (Automatic Transmission) 303-1116 (Manual Transmission)
• Camshaft Sprocket aligning tool 303-1132
• Camshaft sprocket timing pins 303-1126
• Made in China

The 4-piece Fluid Line Clamp Set 50230 is your go-to solution for safely stopping fluid flow. Designed to prevent hose damage, this set is perfect for fuel, transmission, vacuum, and brake lines.

• Prevents Hose Damage: Ensures no damage to hose integrity.
• Versatile Use: Suitable for fuel, transmission, vacuum, and brake lines.
• Multiple Sizes: Includes 10 mm (3/8”), 12.5 mm (1/2”), 25 mm (1”), and 45 mm (1-3/4”) clamps.

Bearing separator set 75-105, 50134

Pul out the bearing with H-type beam and bolts
Capacity: 75-105mm
1 separator
1 main rod
4 pcs extensions

10 pcs 3/8" Dr. Impact twist socket set, 50927А

Specially designed to remove rounded nuts and bolts.

Content:
Inserts 3/8 ": 10; 11; 12; 13; 14, 15; 16; 17; 19 mm
8 mm extension bar
Material: Cr-Mo
Recommendation: Wear safety glasses when using these tools.
Keep sockets free from dirt and solvents to prolong life.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in: China

Camshaft alignment tool set - BMW M47, 50096

This set enables the correct timing to be made when servicing BMW M47 2.0 16 engines
This timing tool set includes crankshaft pin, camshaft setting plate, clamp for camshaft locking tool and the 2 necessary timing pins.
Included:
Crankshaft alignment pin
camshaft alignment tool
clamp assembly for camshaft alignment tool
2x tensioner locking pins
Aplication:
BMW; 118 2.0 E87 (03-07), 120 2.0 E87 (03-07), 318 2.0d/td E46/E90/91 (00-07),
320 2.0d/td E46/E90/91 (97-07), 325 3.0 E90/91/92/93 (06-08), 330 3.0d/xd/cd E46/E90/91/92/93 (98-08),
335 3.0 E90/91/92 (06-08), 520 2.0 E39/E60/61 (99-08), 525 3.0d/xd E39/E60/61 (99-08),
530 3.0d/xd E39/E60/61 (98-08), 535 3.0 E60/61 (04-08), 635 3.0 E63/61 (04-08),
730 3.0d/Ld E38/E65/66 (98-08), X3 2.0 E83 (03-07), X3 3.0d/sd E83 (03-08), X5 3.0 E53/E70 (00-08)
Land Rover; Range Rover 3.0Td6 (02-06), Freelander 2.0Td4 204D3 (00-06),
MG; ZT/T 2.0 (01-05), Rover; 75 2.0CDT/CDTi (99-05)
Engine cod:
BMW; M47, M47TU, M47T2, M57, M57TU, M57T2,
Land Rover; M47R, M57,
MG/Rover; M47R

OEM No.: 11 2 300, 11 6 320, 11 6 322, 11 3 340

The set is in blue case.

4 pcs Nut splitter set, 50227

Made of mechanically drop forged, hardened and galvanized steel.
Ideal for breaking splitting of seized or damaged pliers.

THE TOOLS ARE NOT SUITABLE FOR SPLITTING CARBIDE STEELS!

Made in China

15 pcs Cup type oil filter wrench, 50037

Sizes::

• 65 mm, 14 pt.: CHAMP, HASTINGS, GM/Ac, WIX, NAPPA, PUROLATOR, DAIHATSU, TOYOTA, NISSAN
• 65-67 mm 14 pt.: Kanadai modellek HP4386, HP4967, HP6017, HP6018, DAIHATSU
• 68 mm 14 pt.: HASTINGS, MAZDA, FORD ESCORT, CAPRI, SUBARU, FRAN PH6607, MOTORCRAFT FL816
• 73 mm 14 pt.: TOYOTA, LEXUS
• 74-76 mm 15 pt. : FRAM, AC, STAUM
• 75-77 mm 15 pt.: VW, AUDI, CASITE, GM/AC, HASTINGS, WIX, NAPA FORD, ISUZU, MERCEDES, OPEL
• 74-76 mm 15 pt.: FRAM, AC, STAUM
• 76mm 30 стенен: MOTORCRAFT FL400A, FORD
• 80 mm 15 pt.: HASTINGS, FRAM, PUROLATOR, NISSAN, HONDA, MOTOCRAFT, MAZDA, ISUZU, SUBARU, OPEL, TOYOTA
• 82 mm 15 pt.: MAZDA, SUBARU, TOYOTA, HONDA
• 90 mm 15 pt.: HONDA ACCORD, MITSUBISHI, MOPAR, ISUZU
• 93 mm 15 pt.: CASITE, CHAMP, CHAMPION, GM, FRAN, HASTINGS, OPEL, MAZDA, VOLVO, MITSUBISHI, PUROLATOR, WIX, NISSAN, VW, PORSCHE, RENAULT, FORD, HONDA, AUDI
• 93 mm 36 pt.: MOTOCRAFT FL1A, FLA1B, FL300, FL820, FORD
• 100 mm 15 pt.: FARM, MOTOCRAFT, WIX, ISUZU MITSUBISHI

Press and pull sleeve kit 26 pcs, 50093
For the removal and installation of bushes / bearings and seals etc. Fully universal applications on both cars and LCV.
Contents - 22 x Press Sleeves
- Adapters (Gold):D44 х d34, D46 х d36, D54 х d44, D56 х d46, D58 х d48, D66 х d56, D68 х d58, D70 х d60, D78 х d68, D80 х d70, D82 х d72
- Adapters (Silver) - D48 х d38, D52 х d42, D60 х  d50, D62 х d52, D64 х d54, D72 х d62, D74 х d64, D76 х d66
Inside Diameter from 34-80mm in 2mm steps
Outside Diameter from 44-90mm in 2mm steps
Pulling Spindles with nuts and thrust bearings - M10. M12. M14. M16...

Crankshaft Locking Tool W/Steel Plate, 50315
Description:
2.0 PD TDI Diesel engines with oval crankshaft pulley (non-bored engines).
Contents: injection pump drive pulley locking pin and belt tensioner locking plate.
Application:
•Models:
Audi: A4, A6
Seat: Alhambra, Altea, Leon, Toledo
Skoda: Octavia, Octavia RS, Superb
VW: Golf, Jetta, Passat, Sharan, Tiguan, Touran
•Engine codes: BDK, BKE, BLB, BMA, BMM,
BMP, BMR, BNA, BP ...

1/2" Dr. Torque Angle Gauge, 50369

Required when servicing many late model engines that use torque-to-yield fasteners
Measures angle of rotation after pre-torque in torque-angle applications
The 360 degree scale is marked in 2 degree increments and intervals of 10 and 30 degrees

Made in China

3 pcs injector extractor set

For removing seized or stuck Common Rail injectors without having to disassemble the cylinder head.
Applicable for MERCEDES-BENZ CDI engines 611, 612, 613, etc.
Contents: 1 pcs impact extractor, 1 pcs injector claw, 1 pcs external adapter with internal.

Made in China

9 pcs. Common rail Diesel injector puller extractor set
Description: Slide hammer for DB CDI-engines & Mercedes CDI engines OM 611, 612, 613, Mazda BT50, Hyundai, Sanyong, Jeep, ML 270  etc.
For removing stuck and the seized common-rail injectors without removing the cylinder head.
The sturdy construction will enable the swift removal of even the most severely seized in injector.
Most often injectors can be removed without damage, allowing the injector to be reused.

Puller For Ribbed Drive Pulley, 50146
Clamps onto any ribbed pulley and extracts it from the drive wheel.
Typically used on Peugeot HDi engines.

<p><strong>1/2" Drive Extendable Telescopic Tyre Wrench 380-510mm - P0001</strong></p>

<p>Heavy-duty extendable 1/2" square drive wheel wrench with a telescopic handle, specifically engineered for the effortless removal and tightening of vehicle wheel nuts and bolts.</p>

<p>Made in China</p>