Magma

1/2" Dr. Profession Bent Ratchet Handle 72T, A0001

72 teeth, Ergonomic handle
Material: Cr-V
Made in China

11 Pcs Tamperproof Torx Screwdriver Set, 50919

Chrome vanadium steel.
Round shank shape, plastic and elastomer handle.
Magnetic tip.
Contents:
Totx: T6×3×75mm, T7×3×75mm, T8×3×75mm, T9×3×75mm
Tamperproof: T10×5×75mm, T15×5×75mm, T20×6×100mm, T25×6×100mm, T27×6×100,T30×6×125mm, T40×8×150mm

Made in China

24” (605 mm) Magnetic tool holder, 50246-24

Convenient organizer for various tools as screwdriver, ratchet, hammer etc.
Screw and fasten on the wall.
Length: 605 mm (24 ”)

Made in China

Professional engine timing tool set Citroen / Peugeot - HPI (Petrol) or HDI (Diesel) Engines, 50685

This comprehensive set tools enables the correct engine timing to be made when replacing the timing belt.
Suitable for use on the most recent cars with either HPI (petrol) or HDI (diesel) engines.
Contains important tools for locking the flywheel, locking the crankshaft, locking the camshaft, locking the injection pump shaft, removing the crankshaft pulley, tensioning the toothed belt.

Suitable for petrol engines:
1.9l – 1.1l – 1.4l – 1.6l – 1.8l – 1.9l – 2.0l.
1.6l – 1.8l – 2.0l – 2.2l 16V (turbo and double camshaft).
Diesel engines:
1.4l – 1.5l – 1.7l – 1.8l – 1.9l – 2.1l – 2.5l D / TD / TDI.
1.4l – 1.6l – 2.0l – 2.2l HDI.

Also suitable for identical engines from Fiat, Ford, Nissan, Renault, Rover, Toyota etc.

Made in China

4Pcs 1/2" Drive Extra Long Spline Bit Socket Set, 50467

Fearutes: Extra long spline bit sockets for loosening and tightening drive shaft screws from the outside.
Applicable: for VW, Audi, Seat, Skoda, including VW Transporter T4 and Touareg.
Material:
Hardened and tempered Chrome Vanadium steel sockets.
S2 steel spline bits.
Sizes:
1 pc M8 x 800mm
1 pc M10 x 800mm
1 pc M12 x 800mm
1 pc M14 x 800mm

Made in China

10l Plastic Fuel Can, 75090

Ideal for the storage of petrol and diesel.
Manufactured from high-density polyethylene (HDPE).
Complete with a flexible pouring spout.
Capacity: 10 L
Size: 320 (L) x 155 (W) x 305 (H) mm
Weight: 0.650 kg

Made in China

Car Body Alignment Claw (2-direction), 51161

Bolt size M16×70 mm
Claw width: 43 mm

Overal length: 205 mm
Single way pulling max 3 t
Side way pulling max. 1 t
Weight: 2 kgs

Made in China

Ford, Volvo - Trailing Arm Bush Tool, 50968

Designed for the removal and installation of the rear trailing arm mounting bushes on Ford vehicles.
Also suitable for some Volvo vehicles that share the same Ford platform.
The bush can be replaced without removing the trailing arm from the vehicle.
Applications:
Ford: Mondeo MK4 (2007-), S-Max ( 2006-), Galaxy (2006-)
Volvo: S60, S80, XC60, V70, XC70 (2006-)

Made in China

7 Piece Pressure Loss Testing Kit, 50503

For checking pressure tightness of single cylinders on Diesel and gasoline engines.
Includes:
Dial indicator
M12 x 1.25 mm adaptor for motorbikes
M10 x 1.00 mm adaptor for motorbikes
M24 x 2 mm adaptor for diesel engines
M12 x 1.25 mm adaptor with 7 mm hole for VW diesel engine
Adaptor for multi valve engines
Adaptor for M14 x 1.25 and M18 x 1.5 mm
Working pressure: 6 - 12 bar
Maximum pressure 6.8 bar / 100 PSI.
Note: Before connecting to compressed air system the adjusting valve must be closed.Connect the device to the compressed air system and open the adjusting valve slowly until the pointer reaches the 0-mark.

Made in China

18” (460 mm) Magnetic tool holder, 50246-18

Convenient organizer for various tools as screwdriver, ratchet, hammer etc.
Screw and fasten on the wall.
Length: 460 mm (18 ”)

Made in China

Jaguar-Land Rover-Ford 2.0, 2.2, 2.4, 3.2 TDCi/TDDi - Crankshaft Front Oil Seal Tool, 50951

Developed specifically for the Ford TDCi Duratorq 2.0, 2.2, 2.4 and 3.2 engines found in the Transit, Ranger and Mondeo models. Both components are required when replacing the front crankshaft oil seal and removing the engine front cover.
Application:
Ford Transit:
2.0L Duratorq-DI & TDCI & TDDI (Puma) Diesel 2000-2006
2.2L Duratorq-TDCi (Global Puma) Stage V Diesel 2006-
2.2L Duratorq-TDCi (Puma) Diesel 2006-
2.4L Duratorq-DI (Puma) Diesel 2000-2006
2.4L Duratorq-TDCI (Puma) Diesel 2000-2006
2.4L Duratorq-TDCi (Puma) Diesel 2006-
2.4L Duratorq-TDDi (Puma) Diesel 2000-2006
3.2L Duratorq-TDCI (Puma) Diesel 2006-
Transit Custom 2.2L Duratorq-TDCi (Global Puma) Stage V Diesel 2012-
Ford Mondeo:
2.0L Duratorq-DI & TDCi & TDDi (Puma) Diesel 2000-2007
2.2L Duratorq-TDCi (Puma) Diesel 2000-2007
Ford Ranger:
2.2L Duratorq-TDCi (Puma) Diesel 2011-
3.2L Duratorq-TDCI (Puma) Diesel 2011-
Plus Jaguar X Type X400 and Land Rover Defender

OEM No. 303-679A, 303-682

Made in China

20l Plastic Fuel Can, 75091

Ideal for the storage of petrol and diesel.
Manufactured from high-density polyethylene (HDPE).
Complete with a flexible pouring spout.
Capacity: 20 L
Size: 420 (L) x 180 (W) x 380 (H) mm
Weight: 0.980 kg

Made in China

Pull Camp Car Body Alignment Tool (2-way), 51160

Bolt size M14×120mm
Claw width: 35mm
Overal length: 230mm.
One way pulling max 3 t
Side way pulling max. 1 t
Weight: 2 kgs

Made in China

Mercedes-Benz Ball Joint Socket 43mm, 51043

For quick, easy and professional loosening and tightening of the supporting joint flat nut.
The design of the socket wrench allows the supporting joint pin to be held in place when the nut is loosened or tightened, and it allows the use of a 1/2" screwdriver. The socket wrench specially adapted to the nut engages frictionally in the nut profile.
Slipping is impossible and the high tightening torque (up to 250 Nm) can be applied and transmitted precisely.
Technical data
Drive 1/2" or 30mm Combinationa wrench
Size: 43 mm
Mercedes-Benz Application:
W 167: GLE and GLS front and rear axle
W 205: C-Class 4Matic and AMG models (sedan, T-model, coupe and convertible) front axle
W 213: E-Class 4Matic and AMG models (sedan, model T) front axle
W 238: E-Class 4Matic and AMG models (coupé, cabriolet) front axle
W 253: GLC AMG and GLC Coupé front axle
W 257: CLS 50 AMG Coupé front axle

Made in China

T30H Extra Long Screwdriver 300mm, 50779E

Magnetic tip screwdriver
With Slip-Not ergonomic soft grip handle.
For use on both Tamper Proof and standard Torx screws.
The long length is ideal for hard to reach screws.
Material: S2 steel.
Blade length: 300mm
Overal length: 400mm
Blade Tip: T30H.