LÖTA

Brake Spring pliers, 210-0980-1

Features: for assemble and disassemble the springs of the brake shoes in a drum brake.
Caused Zero damage to the components.
Handle with a socket end for removing spring from anchor stud.
Handle with a grooved end for installing spring on anchor.
Jaw with an unique sunflower-shaped and swivel design allows the operator to grab the surface of the drum brake shoes firmly, and the other jaw hooks thehooking portion of the return spring. And then holding close two handles to assembly or disassemble the spring of the brake shoes.

Made in Taiwan

13 pcs 1/2”Dr. Special socket set, 011212930

Material: Cr-V Steel

Drive:1/2"Dr.

Size:6S-8S-10S-12S,8TS,10PT,

5PT-Female 10-12.5-14-19mm

5PT Male 10mm

12PT M16-M18

Feature:

6S Clutch Nissan,Renault

8S Cylinder head and balance shaft screw Nissan

8TS Balance shaft screw

12S Head bolts Nissan

10S Idle wheel centre screw Toyota

5PT

10mm Brake caliper

12mm Fuel pump Nissan

14mm GM brake caliper

19mm Brake caliper Citroen,Peugeot,Renault

10PT 20mm Rear Trailing arms Honda Civic ,CR-V

M16 Transmission gearbox drain plug Audi: A3 A4 A6 VW:Gof IV

M18 Half-axles VW

Special for the engine cylinder head nut and brake caliper.

Made in Taiwan

2-Jaw Gear puller 80х80, 780-0008

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw M18.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 80 mm
Axis width: 80 mm

Made in Taiwan

1/2" Dr. Profession Ratchet Handle, 317-А4006

72 teeth

With quick release

Made in Taiwan

Windscreen cutting wires triangle shape 1104725201

Due to the pointed cutting angle of 60T his triangular cut-out wire has a particularly good cutting ability. To avoid damages to the painted car body and to the interior this cutting wire should be used mainly for cutting easily accessible bonding’s.
Triangle cross section
Thickness: 0.6mm
Length: 22.5m

Made in Taiwan

1/4" Dr. 60-Tooth Dual-Direction Ratchet with Rotating Handle – 06241 / 505018

The 1/4" drive ratchet features a rotating handle, allowing fast and effortless tightening or loosening of bolts and nuts with minimal wrist movement.
An extension bar can be inserted directly into the handle for enhanced reach and versatility.
Its compact head and high-precision 60-tooth mechanism make it perfect for working in tight or hard-to-reach spaces, saving time and reducing fatigue.
Features:
Drive size: 1/4"
Teeth: 60 (high-precision mechanism)
Function:
Dual-direction Rotating handle for continuous drive action
Extension-compatible through the handle
Compact head for tight spaces

Made in Taiwan

Windscreen cutting wires  square shape 1104724201

Cutting wires is particularly suitable for cutting double glue beads or a very wide layer of polyuretane.
Square cross section
Thickness: 0.6mm
Length: 22.5m

Made in Taiwan

3/4” 6-pt. 44 mm Flank Impact deep socket, YT-9034644

Size: 44 mm
Overal lenght: 92 mm
Material: Cr-Mo

Made in Taiwan

1/2" Dr. Metal socket holder, 659-443216

L: 432 mm - 16 Pcs

Material: Steel

Made in Taiwan

Antifreeze tester (For Ethylene glycol), 01A84906A

Easy to read indicator and designed for the popular modern Ethylene Glycol antifreeze. Suitable for use on OAT (Organic acid technology) antifreeze
Antifreeze Tester test at hot & cold temperatures.
Six floating discs for accurate reading. Number of floating discs indicates coolant strength.
Indicator range:  -7°C to -37°C ( +25°F to -34°F.)
Pure antifreeze will freeze at -12°C /10.4°F.
It permits to determine, with good approximation, the freezing point of the anti-freeze/coolant in the radiator and to reset the required protection level.
Floating orange disc shows over protection and loss of efficiency.

Made in Taiwan

3/8” Dr. Adjustable torque wrench 5 – 25 Nm, 418-T-60-38

The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/8" Dr.
Capacity: 5 – 25 Nm (0.5 – 2.5 Kgs)
Made in Taiwan

AdBlue/DEF Tester (Diesel exhaust fluid), 01A84906

For the diesel engine emission system to function properly, the strength of the DEF solution must be maintained at 32.5% urea. Over time, the strength of the solution may change by evaporation, resulting in a reduction in the aqueous component of the solution or contamination. Both of these can lead to changes in the quality and strength of the DEF, which will be marked by the engine diagnostic system (DEF warning light).
Application:
For all vehicles equipped with diesel engines using urea solution at 32.5% as diesel exhaust (AdBlue®).
Gives a clear pass/fail result .
Accurate result regardless of sample temperature
Easy to use and read.
Attention! Always wash the inside of the appliance with distilled water after use.

Made in Taiwan

1" Dr. 6-pt Flank socket 70mm

Material: Cr-V

Code: 505074

3/8" 20-110 Nm Torque Wrench 418-T-80

The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/8" Dr.
Capacity: 20-110 Nm (2 – 11 Kgs)

Made in Taiwan

40 pcs Power bits set, 002-2026

Contents:
1бр.: 3/8" DR. adaptor
1бр.: 1/2" DR. adaptor
7pc Hex bits L30 mm: 4, 5, 6, 7, 8, 10 и 12
7pc Hex bits L75 mm: 4, 5, 6, 7, 8, 10 и 12
7pc Star bits L30 mm: T - 20, 25, 30, 40, 45, 50 и 55
7pc Star bits L75 m: Т- 20, 25, 30, 40, 45, 50 и 55
5pc Spline bits L30 mm: М - 5, 6, 8, 10 и 12 (30mm Long)
5pc Spline bits L75 мм: М - 5, 6, 8, 10 и 12 (75mm Long)
Material: Chrome Vanadium (6150Crv)

Made in Taiwan