LÖTA

4" (102 mm) Replacement stone, 530-0100-0123-М4

Size: 4" (102 mm)

3 pcs set, for Standard engine cylinder hone 530-0100

Made in Taiwan

5 pcs Trim fastener and molding removal set

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

Introducing the Brake Retainer Spring Compressor, 031-A641201 – your go-to tool for quick, clear, and safe brake maintenance!

This tool is designed to effortlessly remove and replace brake spring washers on most newer vehicles with 5/8"-7/8" diameter springs. Made with precision in Taiwan, this compressor ensures reliability and efficiency for all your brake servicing needs.

• Effortless Removal & Replacement: Quickly swap out brake spring washers.
• Wide Compatibility: Suitable for 5/8"-7/8" diameter springs.
• Safe Operation: Designed for clear and safe spring handling.

Doube end spanner head 1/4" Dr., 1488-06

Lenght: 150 mm

Made in Taiwan

10-25mm Armature Bearing puller 009-00AB

Features:
To disssembly cars bearing
To disassembly electric products bearings
It will not make the hook loose even if you  don't use the fixed screw.
Size specifications:
Disassembly out-wheel capacity: 10-25 mm
Diameter of screw nose: 4 mm
Hook lenght: 40 mm
Highest loading capacity: 0.6 ton
Weight: 0.2 kg

Made in: Taiwan

Puller with 2 slim legs, 210-04267B

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel slin legs.
Capacity: 0-45mm
P: 40mm
N.W. 0.350 kgs

Made in Taiwan

Code: 533043

Porsche & Audi wheel lug socket, 846-7099A

- 1/2"Dr. 10-pt. 16 mm; L:38 mm
- Applicable for removal of the calipers brake pad screw for Posche Cayenne, Posche Macan, Porsche Cayman and Audi Q7

Made in Taiwan

Puller with 2 slim legs, 210-04267A

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel slin legs.
Capacity: 0-35mm
P: 40mm
N.W. 0.300kgs

Made in Taiwan

VAG Cam Chain Tensioner Locking Tool, 058-62237
Compresses the camshaft chain tensioner safely and easily when removing camshafts or replacing the tensioner or its gasket. These tasks are virtually impossible without the correct tool.
The tool threads into the guide, compressing the tensioner, relieving chain tension.
The no-mar plastic contact surface will not harm the tensioner face.
Applicable:
Audi: A4, A6, A8, TT, S4, S6, RS6
Seat: Ibiza, Cordoba, Leon, Toledo, Alhambra
Skoda: Octavia
Volkswagen: Polo, Golf, Jetta, Passat, Beetle, Touareg
Engine Codes: ADR, AEB, AFY, AGN, AGU, AHA, AJE, AJH, AJL, AJP, AJQ, AMB, AMK, AMU, ANB, APB, APG, APH, APP, APT, APU, APX, ARH, ARK, ARX, ARY, ARZ, ATC, ATQ, AUM, AUQ, AVC, AWC, AWM, AWN, AWP, AWT, AWV, AYP, BAM, BBD, BCY, BEA, BEL, BFM, BKF, BNU
OEM №: 3366

Made in Taiwan

14 pcs Special vibro chisel set, 846-5047

A : 74 mm Large Flat Hammer.
B : 63 mm Large Concave Hammer.
C : 38 mm Medium Flat Hammer.
D : 1/2" Dr. Adaptor Hammer.
E : Adaptor Shaft Hammer.
F : 25 mm Hammer.
G : Track Rod Hammer.
H : 7" x 24 mm Impact ball joint separator
I : 7"x 20 mm Impact ball joint separator
J : 20 mm Flat Chisel
K : Point Chisel.
L : 38.5 mm Diameter Body Smoother Hammer.
M : 10 pcs Spare O-Rings
N : Air Hammer

Tools material: Cr-Mo

Made in Taiwan

1/2”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037А

Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axle.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm
• H: 32 mm

Made in Taiwan

3/4”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037B

Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axles.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm.
• H: 60 mm

Made in Taiwan

Benz strut nut socket, 780-9002\

Features:
Specifically designed for Mercedes-Benz C Class W203
Applicable:
Mercedes-Benz C Class 2000-2008 C203 front suspension strut top nuts (Shock absorber piston rod top nut).
Also fits W209 CLK 2003-2008
Used with a 7 mm Hex key to hold strut in place whilst tightening
22 mm Hex drive
Selected steel

Made in Taiwan

VW & AUDI Strut nut socket, 210-0155-AT

Features:
Suitable for the disassemble and installation of top shock retaining nut.
Used with 22mm spanner wrench.
Material: Heat treated and tempered chrome molybdenum steel (CR-MO)
Overall Length: 44mm
Applications: Most Audi & VW front wheel drive vehicles.

Made in Taiwan

51 mm Lower ball joint socket for Peugeot/Citroen, 210-0215-51

Features:
Suitable for removal of OEM and aftermarketlower ball joints on Peugeot and Citroen.
Profile: 51 mm x 35 mm
Length: 45 mm

Made in Taiwan